The action labels wrapped to two lines and crushed the column — now icon
buttons with tooltips, like every other admin table. The form column was too
narrow for its content: the datetime fields silently clipped their own value,
so they are stacked and full width now, with duration chips because typing an
end timestamp by hand is the fiddliest part of the form. Host rows show a real
selected state and a per-datacenter count, and the impact column says
"1 Host · 1 Kunde" instead of "Host(s) · Kunde(n)".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ownership alone kept download, block and delete reachable for someone whose
roles were removed by any path other than revokeStaff() — a direct role edit,
say. Being staff is now part of ownership, so revocation closes these doors
without depending on whoever removed the role also remembering the tunnel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The download counter was read-modify-written, so two concurrent retrievals
recorded one. It is an audit trail — under-reporting is the failure mode it
must not have.
The creation-race test broke when issuing moved into a transaction: its
simulated competitor writes inside our transaction, so the rollback removes
that row too. It now asserts what actually matters (the loser is told, and
creates nothing) and states what a single-connection sqlite test cannot show.
This test was red in the previous commit — my mistake for committing before
reading the run.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A revocation committing between the operator check and the insert would find no
peer to remove and still leave the revoked colleague with a brand-new tunnel.
Issuing now runs in a transaction that locks the owner row — the same row
revokeStaff() locks — so the two cannot interleave.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every five-second poll re-rendered the page, putting the private key into
another HTTP response — the handoff kept it out of the snapshot but not out of
the responses. Traffic figures can wait the minute it takes to copy a key.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Creating a second access with a supplied key skipped the config branch, so the
first access's private configuration stayed on screen under the new name — and
someone would have handed it out.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Once revealed, the plaintext sits in the handoff cache for ten minutes, and the
modal read it from the token alone. A former owner could keep pulling the key
out of an open modal after revocation — the exact window purgeSecret() exists to
close. Every request now re-checks the policy and drops the handoff when it no
longer holds.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The sidebar still gated the VPN entry on vpn.manage, which the split deleted —
so the page would have vanished from the console for every role, Owner
included. Every operator can hold their own access, so the entry is shown to
all of them and the page itself shows only what the policy allows. Guarded by a
test across all five roles, which is the assertion my rewrite had dropped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A worker could pick the job up mid-transaction, still see the peer as active,
leave it on the hub — and never be asked again, because the committed state is
only a soft delete. A revoked colleague would keep their tunnel until some
later reconciliation noticed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Codex spotted the migration labelling sync-adopted peers as staff with no
owner, which breaks the invariant the same migration introduces. The live sync
had the identical hole — it never set kind at all, so every adopted peer landed
on the 'staff' default. Both now use system for a peer nobody is behind, and
promote it to host once the link is known.
.env.example carried ADMIN_HOSTS twice; phpdotenv keeps the first, so a fresh
checkout would have got the list without localhost and 404'd its own console.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reworked after a design consultation with Codex, which pushed back on my first
proposal in three useful ways.
Ownership and rights:
- vpn.manage split into vpn.view.all and vpn.manage.all. Seeing an access is
not managing it, and neither is holding its private key.
- Record-level rules live in VpnPeerPolicy, not in permissions: an access
belongs to a person, and ownership is what grants sight of it. Every operator
reaches the page, but sees only their own unless they may see all.
- Issuing an access is not self-service — it reaches the management network, so
it needs vpn.manage.all even for oneself.
- New Developer role: sees everything, manages nothing. Writing code does not
imply authority over other people's access.
- kind (staff|host|system) replaces a null user_id that had to mean two
different things at once.
Config storage, opt-in per access:
- Downloading is owner-only — explicitly NOT for view.all or manage.all. An
admin who needs access revokes this one and issues their own, which keeps the
record of who holds what honest.
- The password is asked on EVERY retrieval, rate-limited. Laravel's
password.confirm keeps a 15-minute session stamp, which would authorise
unlimited later downloads from an unattended browser.
- Stored under VPN_CONFIG_KEY, not APP_KEY: a leaked application key must not
also hand over the management network. Purged on revocation and when a staff
member is revoked — console taken away, tunnel left open was the worst case.
- The plaintext never enters a Livewire snapshot (the page polls every five
seconds); the component carries an opaque handle instead.
Also: copy button works without HTTPS again (navigator.clipboard only exists in
a secure context, so over http it silently did nothing), plus config download
as a file and a QR code for the mobile apps.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The FK only nulled host_id, so the adopted peer stayed enabled-but-absent: shown
as "wird angewendet" forever, and re-enabling it would have put the deleted
host's key and address back on the hub. PurgeHost now tombstones that row, which
hands it to the same revocation machinery as everything else.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- A host's wg_pubkey may not be in vpn_peers yet, so the duplicate check passed
and an operator could create an access with it. ApplyVpnPeer would then run
wg set with a freshly allocated address, rewriting that host's allowed-ip and
cutting CluPilot's management tunnel to a live machine. Creation now rejects
keys already held by a host, checked under the allocation lock.
- A sync landing between addPeer() and the step storing wg_pubkey adopted the
peer as "unknown", and a later sync filled in host_id but left the name, so
the page showed that host as unknown forever. The name is now filled in when
the link becomes known — only for sync-adopted rows, so an access an operator
named keeps its name.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureWireguard and RemoveWireguardPeer mutate the hub too, and were not
taking the lock, so a sync could still read the interface around them and
write stale state. Both now hold wireguard:hub, which is what makes the
read/mutation guarantee actually hold.
- The duplicate-key check ran before the allocation lock, so two concurrent
creations with the same key both passed it and the loser hit the unique index
as an unhandled 500. The check moved inside the lock, with the index kept as
a caught backstop for any writer that does not take it — reproduced in a test
by inserting a colliding row from within the allocation call.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A sync could read the hub snapshot just before ApplyVpnPeer removed a peer and
purged its tombstone, then adopt what it had seen as a fresh enabled access —
restoring a revoked one. Both jobs now hold Cache::lock('wireguard:hub') around
read-decide-mutate, so a reconciliation can never straddle a removal. Retry
removals are dispatched after the lock is released, because the sync queue
driver runs them inline and they take the same lock.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
If an add job was retried after the access had been revoked and its tombstone
purged, it found no row and trusted its own enabled=true payload — re-adding a
key that no longer had a row anyone could revoke it with. A missing row can only
mean the access is gone, so the captured payload may now remove but never
enable.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two more from Codex:
- Addresses come from one subnet but live in two tables (hosts.wg_ip and
vpn_peers.allowed_ip), so a concurrent host onboarding and console creation
could each see the same address as free and both insert — neither unique
index sees the other. Creation now waits on Cache::lock('wireguard:allocate'),
the same lock ConfigureWireguard already holds while reserving a host address.
- mount() runs once, so revoking vpn.manage left an open tab polling every five
seconds and still receiving fresh peer state. Authorization now also runs on
hydration, which is what the poll goes through.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two lifecycle holes Codex found in the new VPN management:
1. Delete removed the row before the hub knew. If the removal job was delayed
or failed, SyncVpnPeers saw a peer it did not recognise and adopted it back
as a live access — silently restoring what an operator had just revoked, and
with no row left to revoke it again. Deletion is now a soft-delete
tombstone: the row survives until the hub confirms the peer is gone, the
sync retries the removal instead of adopting, and the tombstone is purged
only once the peer is really absent. It also keeps the key and the tunnel
address reserved meanwhile, so neither is handed out twice.
2. ApplyVpnPeer applied the state captured at dispatch. A retried block job
could therefore undo a later unblock, and nothing would repair it — the sync
only observes state, it never re-applies intent. The job now resolves the
current desired state from the row and treats its payload as a fallback for
the case where the row is already gone.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The console can now create, block and remove VPN accesses, and shows who is
actually connected — traffic counters, source endpoint and last handshake.
Design notes:
- The web container has no wg0, so the page never talks to WireGuard. Live
state is copied in by SyncVpnPeers on the provisioning queue (the only worker
whose container owns the interface); the page polls the database and merely
nudges that job, throttled so many open tabs cannot flood the queue.
- enabled (operator intent) and present (observed on the hub) are stored
separately, so a sync can never quietly undo a block and drift stays visible
as "wird angewendet".
- The sync adopts peers the host pipeline registered, naming them after their
host — otherwise "who is on the VPN" would have blind spots.
- Keypairs are generated in PHP via libsodium rather than shelling out to
wg genkey (no interface in this container, and it keeps generation testable).
The private key is shown once and never stored.
- allocateIp() now also considers vpn_peers, which would otherwise be handed a
tunnel address a host already holds.
- vpn.manage is a new capability held by Owner/Admin only, and it hides the nav
entry too — a VPN access reaches the management network.
Verified end to end against the real hub, not just mocks: created an access in
the browser, connected with the generated config, watched the console flip to
"Verbunden" with real counters, then blocked it and confirmed the peer was
gone from wg0 and the client could no longer handshake.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DNS names are case-insensitive and Symfony's getHost() always returns lowercase,
so ADMIN_HOSTS=Admin.Example.com rejected every request and locked operators
out. Normalised in the config AND at the comparison, so the value is safe
whichever route it took in (env, cached config, runtime set).
operator()/admin() moved from RbacTest/HostManagementTest to tests/Pest.php:
they were only loaded when those files happened to be in the run, so a targeted
single-file run died on 'undefined function operator()'.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Admin actions post to /livewire/update, which a path-scoped guard skips — an
operator session could drive admin components through a PUBLIC hostname despite
ADMIN_HOSTS. The restriction is now registered as Livewire-persistent middleware
and listed on the admin route group, so Livewire re-applies it from the
component snapshot.
Proven by replaying a snapshot taken from the real rendered page: identical
payload -> 404 on a public host, 200 on the allowed host (positive control, so
the test cannot pass for the wrong reason).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Proxmox fleet and the operator console must never be publicly reachable. The
primary control is the reverse proxy, but nginx here is a catch-all
(server_name _), so /admin was served on EVERY hostname — a proxy
misconfiguration would expose it. ADMIN_HOSTS pins it; any other host gets 404
(not 403: a public domain must not disclose that a console exists).
Prepended to the group instead of the admin route group on purpose: route
middleware is reordered by Laravel's priority list, which runs first — a
guest would then be redirected to /login and learn the console is there. Covered
by a test for exactly that case. Empty ADMIN_HOSTS = unrestricted, so nobody is
locked out by upgrading.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- isOperator()/EnsureAdmin/broadcast fall back to is_admin so a legacy admin is
never locked out by a stale permission cache
- published modal: centered max-w-lg card (dynamic modalWidth class was purged
by Tailwind → full-width)
- datacenter edit moved to a modal (no row-height jump); location is now a
country dropdown (config/countries.php) instead of free text
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- 5 operator roles (Owner/Admin/Support/Billing/Read-only) seeded via migration
with a capability catalogue; app checks capabilities via Gate, never role names
- every mutating admin action authorizes server-side (hosts/datacenters/customers/
impersonate/provisioning); is_admin reads migrated to console.view / isOperator()
- admin /settings: own account + Owner-only staff invite/role/revoke with
last-owner, self-role and customer-collision guards (transactional)
- sidebar 'zum Kundenportal' link replaced with Settings
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- seat limit follows the active/cancelling package, not a newer inactive record
- suspend/reactivate toggle refuses closed accounts (terminal); closed shown in list
- factory emails use a large unique numeric space (safeEmail pool could collide
late in a full suite run)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- customers.user_id unique so impersonation/billing can't cross customers
- HostCreate validates datacenter is active (exists rule + active=1)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- migration seeds fsn/hel + any host-referenced code so existing installs
keep selectable datacenters after upgrade
- Billing::customer() resolves via user_id, email only as legacy fallback
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
datacenters table/model + admin CRUD (/admin/datacenters, nav). HostCreate
picks from active datacenters (validated); hosts show the datacenter code.
Seeded fsn/hel. 5 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureWireguard checks setup command results and only records the wg_peer
resource after the handshake verifies, so a transient setup failure re-runs
the full setup instead of getting stuck on the idempotent path.
- Host removal now deactivates immediately and queues PurgeHost, which deletes
runs under the runner lock (waiting out a long step) — no 15s LockTimeout error.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- PhpseclibRemoteShell sets a command timeout (default 2000s) so apt
full-upgrade/install don't hit phpseclib's ~10s default and fail.
- Host removal dispatches RemoveWireguardPeer to the provisioning queue, which
runs in the worker that owns wg0 (the web container can't manage WireGuard).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Removing a host now removes its WireGuard hub peer so a freed wg_ip can't
route to the removed server via a stale peer.
- RebootIntoPveKernel clears reboot_issued/deadline when it times out, so the
manual retry action actually re-issues a reboot instead of failing instantly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A retried step (manual or after a timeout) now gets a fresh started_at, so
RunRunner no longer immediately re-detects the timeout and burns the retry
budget without executing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Real hosts list, add-host form (StartHostOnboarding), host detail with live
progress stepper (Reverb + wire:poll fallback), retry failed run, remove via
wire-elements/modal (deregister only). DE+EN. 8 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Separate admin console at /admin, gated to is_admin users (EnsureAdmin middleware
+ migration/seed; a plain customer user is seeded to prove the gate). Distinct dark
aesthetic achieved purely by token scoping: .theme-admin overrides every CSS design
token to a dark graphite / signal-orange palette, so ALL shared components (button,
card, badge, table, stat, chart) render dark with zero new markup (R3). Chart island
now reads tokens from its own element, so charts are theme-aware.
Sections (each full-page class-based Livewire, English routes R13, localized DE/EN):
- Overview: fleet KPIs, fleet-growth line, host-load bars, MRR bars, active runs, alerts.
- Customers: table + plan doughnut. Instances: fleet table (vmid/host/storage).
- Hosts: capacity cards (storage/CPU bars). Provisioning: runs table + live stepper.
- Revenue: MRR/ARR/ARPU/churn KPIs, MRR line, plan doughnut, recent payments.
- Locale-aware month labels/currency (Carbon/Number).
18 new Pest tests (guest redirect / non-admin 403 / admin render per section) → 44
green. R12 browser: all six admin pages HTTP 200, ZERO console errors (Chart.js dark).
Codex (R15) — clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
nexxo