Two lifecycle holes Codex found in the new VPN management:
1. Delete removed the row before the hub knew. If the removal job was delayed
or failed, SyncVpnPeers saw a peer it did not recognise and adopted it back
as a live access — silently restoring what an operator had just revoked, and
with no row left to revoke it again. Deletion is now a soft-delete
tombstone: the row survives until the hub confirms the peer is gone, the
sync retries the removal instead of adopting, and the tombstone is purged
only once the peer is really absent. It also keeps the key and the tunnel
address reserved meanwhile, so neither is handed out twice.
2. ApplyVpnPeer applied the state captured at dispatch. A retried block job
could therefore undo a later unblock, and nothing would repair it — the sync
only observes state, it never re-applies intent. The job now resolves the
current desired state from the row and treats its payload as a fallback for
the case where the row is already gone.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The console can now create, block and remove VPN accesses, and shows who is
actually connected — traffic counters, source endpoint and last handshake.
Design notes:
- The web container has no wg0, so the page never talks to WireGuard. Live
state is copied in by SyncVpnPeers on the provisioning queue (the only worker
whose container owns the interface); the page polls the database and merely
nudges that job, throttled so many open tabs cannot flood the queue.
- enabled (operator intent) and present (observed on the hub) are stored
separately, so a sync can never quietly undo a block and drift stays visible
as "wird angewendet".
- The sync adopts peers the host pipeline registered, naming them after their
host — otherwise "who is on the VPN" would have blind spots.
- Keypairs are generated in PHP via libsodium rather than shelling out to
wg genkey (no interface in this container, and it keeps generation testable).
The private key is shown once and never stored.
- allocateIp() now also considers vpn_peers, which would otherwise be handed a
tunnel address a host already holds.
- vpn.manage is a new capability held by Owner/Admin only, and it hides the nav
entry too — a VPN access reaches the management network.
Verified end to end against the real hub, not just mocks: created an access in
the browser, connected with the generated config, watched the console flip to
"Verbunden" with real counters, then blocked it and confirmed the peer was
gone from wg0 and the client could no longer handshake.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DNS names are case-insensitive and Symfony's getHost() always returns lowercase,
so ADMIN_HOSTS=Admin.Example.com rejected every request and locked operators
out. Normalised in the config AND at the comparison, so the value is safe
whichever route it took in (env, cached config, runtime set).
operator()/admin() moved from RbacTest/HostManagementTest to tests/Pest.php:
they were only loaded when those files happened to be in the run, so a targeted
single-file run died on 'undefined function operator()'.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Admin actions post to /livewire/update, which a path-scoped guard skips — an
operator session could drive admin components through a PUBLIC hostname despite
ADMIN_HOSTS. The restriction is now registered as Livewire-persistent middleware
and listed on the admin route group, so Livewire re-applies it from the
component snapshot.
Proven by replaying a snapshot taken from the real rendered page: identical
payload -> 404 on a public host, 200 on the allowed host (positive control, so
the test cannot pass for the wrong reason).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Proxmox fleet and the operator console must never be publicly reachable. The
primary control is the reverse proxy, but nginx here is a catch-all
(server_name _), so /admin was served on EVERY hostname — a proxy
misconfiguration would expose it. ADMIN_HOSTS pins it; any other host gets 404
(not 403: a public domain must not disclose that a console exists).
Prepended to the group instead of the admin route group on purpose: route
middleware is reordered by Laravel's priority list, which runs first — a
guest would then be redirected to /login and learn the console is there. Covered
by a test for exactly that case. Empty ADMIN_HOSTS = unrestricted, so nobody is
locked out by upgrading.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- isOperator()/EnsureAdmin/broadcast fall back to is_admin so a legacy admin is
never locked out by a stale permission cache
- published modal: centered max-w-lg card (dynamic modalWidth class was purged
by Tailwind → full-width)
- datacenter edit moved to a modal (no row-height jump); location is now a
country dropdown (config/countries.php) instead of free text
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- 5 operator roles (Owner/Admin/Support/Billing/Read-only) seeded via migration
with a capability catalogue; app checks capabilities via Gate, never role names
- every mutating admin action authorizes server-side (hosts/datacenters/customers/
impersonate/provisioning); is_admin reads migrated to console.view / isOperator()
- admin /settings: own account + Owner-only staff invite/role/revoke with
last-owner, self-role and customer-collision guards (transactional)
- sidebar 'zum Kundenportal' link replaced with Settings
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- seat limit follows the active/cancelling package, not a newer inactive record
- suspend/reactivate toggle refuses closed accounts (terminal); closed shown in list
- factory emails use a large unique numeric space (safeEmail pool could collide
late in a full suite run)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- customers.user_id unique so impersonation/billing can't cross customers
- HostCreate validates datacenter is active (exists rule + active=1)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- migration seeds fsn/hel + any host-referenced code so existing installs
keep selectable datacenters after upgrade
- Billing::customer() resolves via user_id, email only as legacy fallback
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
datacenters table/model + admin CRUD (/admin/datacenters, nav). HostCreate
picks from active datacenters (validated); hosts show the datacenter code.
Seeded fsn/hel. 5 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureWireguard checks setup command results and only records the wg_peer
resource after the handshake verifies, so a transient setup failure re-runs
the full setup instead of getting stuck on the idempotent path.
- Host removal now deactivates immediately and queues PurgeHost, which deletes
runs under the runner lock (waiting out a long step) — no 15s LockTimeout error.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- PhpseclibRemoteShell sets a command timeout (default 2000s) so apt
full-upgrade/install don't hit phpseclib's ~10s default and fail.
- Host removal dispatches RemoveWireguardPeer to the provisioning queue, which
runs in the worker that owns wg0 (the web container can't manage WireGuard).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Removing a host now removes its WireGuard hub peer so a freed wg_ip can't
route to the removed server via a stale peer.
- RebootIntoPveKernel clears reboot_issued/deadline when it times out, so the
manual retry action actually re-issues a reboot instead of failing instantly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A retried step (manual or after a timeout) now gets a fresh started_at, so
RunRunner no longer immediately re-detects the timeout and burns the retry
budget without executing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Real hosts list, add-host form (StartHostOnboarding), host detail with live
progress stepper (Reverb + wire:poll fallback), retry failed run, remove via
wire-elements/modal (deregister only). DE+EN. 8 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Separate admin console at /admin, gated to is_admin users (EnsureAdmin middleware
+ migration/seed; a plain customer user is seeded to prove the gate). Distinct dark
aesthetic achieved purely by token scoping: .theme-admin overrides every CSS design
token to a dark graphite / signal-orange palette, so ALL shared components (button,
card, badge, table, stat, chart) render dark with zero new markup (R3). Chart island
now reads tokens from its own element, so charts are theme-aware.
Sections (each full-page class-based Livewire, English routes R13, localized DE/EN):
- Overview: fleet KPIs, fleet-growth line, host-load bars, MRR bars, active runs, alerts.
- Customers: table + plan doughnut. Instances: fleet table (vmid/host/storage).
- Hosts: capacity cards (storage/CPU bars). Provisioning: runs table + live stepper.
- Revenue: MRR/ARR/ARPU/churn KPIs, MRR line, plan doughnut, recent payments.
- Locale-aware month labels/currency (Carbon/Number).
18 new Pest tests (guest redirect / non-admin 403 / admin render per section) → 44
green. R12 browser: all six admin pages HTTP 200, ZERO console errors (Chart.js dark).
Codex (R15) — clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
nexxo