Customers can now see what they have used and what is left, and the service
slows down rather than stopping when the allowance is gone — a slow Nextcloud
gets a top-up, a dead one gets a cancellation.
- instance_traffic keeps one row per instance per month. Proxmox counters are
cumulative since the VM last started, so usage is the difference between two
samples, and a counter that went backwards means a restart, not a refund.
- Outbound is what counts: inbound is free at our providers and egress is what
Hetzner's 20 TB per server applies to.
- CollectInstanceTraffic samples every 15 minutes, warns once per threshold
(80/95 %) rather than on every run, and at 100 % limits the VM's NIC via
Proxmox — released again as soon as the customer tops up or the month rolls
over.
- The dashboard gets a full-width band (it throttles the service, so it is not
a tile among tiles) with the top-up offer right next to the warning.
- Bytes are formatted in SI units now: allowances are computed in SI, so
dividing by 1024 made a 1000 GB plan read as "931 GB".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
While the product is still being built, the marketing site and the customer
portal should not be reachable — but they must stay reachable for us.
- A toggle in the console (site.manage, Owner/Admin) stored in a new
app_settings table, because this has to be flippable without a deploy.
- Outsiders get a placeholder with 503 + noindex, not 200: a 200 invites search
engines to index the placeholder as the site's content, which is far harder
to undo than to prevent.
- Anyone on the management VPN, and any signed-in operator, sees the real site.
The console, Livewire's endpoint, the Stripe webhook and the health check are
always reachable — otherwise the switch could only be flipped once.
- robots.txt is generated by the app and follows the switch. It had to stop
being a static file: nginx short-circuited it and Laravel's stock file said
'Disallow:' with an empty value, so crawlers were never told anything.
- Settings reads fall back to the default when the table is unavailable. The
gate reads one on every request, so a deploy running new code before migrate
would otherwise answer the entire site with a 500.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Codex spotted the migration labelling sync-adopted peers as staff with no
owner, which breaks the invariant the same migration introduces. The live sync
had the identical hole — it never set kind at all, so every adopted peer landed
on the 'staff' default. Both now use system for a peer nobody is behind, and
promote it to host once the link is known.
.env.example carried ADMIN_HOSTS twice; phpdotenv keeps the first, so a fresh
checkout would have got the list without localhost and 404'd its own console.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reworked after a design consultation with Codex, which pushed back on my first
proposal in three useful ways.
Ownership and rights:
- vpn.manage split into vpn.view.all and vpn.manage.all. Seeing an access is
not managing it, and neither is holding its private key.
- Record-level rules live in VpnPeerPolicy, not in permissions: an access
belongs to a person, and ownership is what grants sight of it. Every operator
reaches the page, but sees only their own unless they may see all.
- Issuing an access is not self-service — it reaches the management network, so
it needs vpn.manage.all even for oneself.
- New Developer role: sees everything, manages nothing. Writing code does not
imply authority over other people's access.
- kind (staff|host|system) replaces a null user_id that had to mean two
different things at once.
Config storage, opt-in per access:
- Downloading is owner-only — explicitly NOT for view.all or manage.all. An
admin who needs access revokes this one and issues their own, which keeps the
record of who holds what honest.
- The password is asked on EVERY retrieval, rate-limited. Laravel's
password.confirm keeps a 15-minute session stamp, which would authorise
unlimited later downloads from an unattended browser.
- Stored under VPN_CONFIG_KEY, not APP_KEY: a leaked application key must not
also hand over the management network. Purged on revocation and when a staff
member is revoked — console taken away, tunnel left open was the worst case.
- The plaintext never enters a Livewire snapshot (the page polls every five
seconds); the component carries an opaque handle instead.
Also: copy button works without HTTPS again (navigator.clipboard only exists in
a secure context, so over http it silently did nothing), plus config download
as a file and a QR code for the mobile apps.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two lifecycle holes Codex found in the new VPN management:
1. Delete removed the row before the hub knew. If the removal job was delayed
or failed, SyncVpnPeers saw a peer it did not recognise and adopted it back
as a live access — silently restoring what an operator had just revoked, and
with no row left to revoke it again. Deletion is now a soft-delete
tombstone: the row survives until the hub confirms the peer is gone, the
sync retries the removal instead of adopting, and the tombstone is purged
only once the peer is really absent. It also keeps the key and the tunnel
address reserved meanwhile, so neither is handed out twice.
2. ApplyVpnPeer applied the state captured at dispatch. A retried block job
could therefore undo a later unblock, and nothing would repair it — the sync
only observes state, it never re-applies intent. The job now resolves the
current desired state from the row and treats its payload as a fallback for
the case where the row is already gone.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The console can now create, block and remove VPN accesses, and shows who is
actually connected — traffic counters, source endpoint and last handshake.
Design notes:
- The web container has no wg0, so the page never talks to WireGuard. Live
state is copied in by SyncVpnPeers on the provisioning queue (the only worker
whose container owns the interface); the page polls the database and merely
nudges that job, throttled so many open tabs cannot flood the queue.
- enabled (operator intent) and present (observed on the hub) are stored
separately, so a sync can never quietly undo a block and drift stays visible
as "wird angewendet".
- The sync adopts peers the host pipeline registered, naming them after their
host — otherwise "who is on the VPN" would have blind spots.
- Keypairs are generated in PHP via libsodium rather than shelling out to
wg genkey (no interface in this container, and it keeps generation testable).
The private key is shown once and never stored.
- allocateIp() now also considers vpn_peers, which would otherwise be handed a
tunnel address a host already holds.
- vpn.manage is a new capability held by Owner/Admin only, and it hides the nav
entry too — a VPN access reaches the management network.
Verified end to end against the real hub, not just mocks: created an access in
the browser, connected with the generated config, watched the console flip to
"Verbunden" with real counters, then blocked it and confirmed the peer was
gone from wg0 and the client could no longer handshake.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- 5 operator roles (Owner/Admin/Support/Billing/Read-only) seeded via migration
with a capability catalogue; app checks capabilities via Gate, never role names
- every mutating admin action authorizes server-side (hosts/datacenters/customers/
impersonate/provisioning); is_admin reads migrated to console.view / isOperator()
- admin /settings: own account + Owner-only staff invite/role/revoke with
last-owner, self-role and customer-collision guards (transactional)
- sidebar 'zum Kundenportal' link replaced with Settings
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The DB now refuses to orphan a host; datacenter delete pre-checks for a friendly
message and catches the constraint as the race backstop.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- seat limit follows the active/cancelling package, not a newer inactive record
- suspend/reactivate toggle refuses closed accounts (terminal); closed shown in list
- factory emails use a large unique numeric space (safeEmail pool could collide
late in a full suite run)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- customers gain profile + branding + closed_at; instances gain cancellation
fields; branding resolver (NULL -> CluPilot defaults) snapshotted into the
provisioning run context
- cancel package: term-end, irreversible, typed-confirm modal (R5)
- close account: guarded (no active package), typed-confirm modal (R5)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- customers.user_id unique so impersonation/billing can't cross customers
- HostCreate validates datacenter is active (exists rule + active=1)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- migration seeds fsn/hel + any host-referenced code so existing installs
keep selectable datacenters after upgrade
- Billing::customer() resolves via user_id, email only as legacy fallback
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
datacenters table/model + admin CRUD (/admin/datacenters, nav). HostCreate
picks from active datacenters (validated); hosts show the datacenter code.
Seeded fsn/hel. 5 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Failed run releases the instance (status=failed) so its quota stops counting
against host capacity.
- CompleteProvisioning activates instance+order only AFTER onboarding tasks +
credential delivery succeed.
- ConfigureNetwork polls until the guest has an address (no wrong Traefik route).
- customers.email unique + race-safe customer resolution in the intake action.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Stripe: only checkout.session.completed with payment_status=paid (dedupes the
paired payment_intent event and blocks unpaid async sessions).
- Capture the guest IP (ConfigureNetwork) and point Traefik at the VM, not the
Proxmox host, so ACME/HTTP-01 can reach Nextcloud.
- Resize the disk to an absolute target (not '+…') so a retry can't double it.
(Codex #4 timeout was a false positive — started_at resets per step.)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- StepResult::poll — polling steps (reboot) wait without consuming the retry
budget; the step owns its deadline. Reboot maxDuration > deadline.
- Failed runs move a Host subject to 'error' via ProvisioningSubject hook
(no host stuck 'onboarding').
- ConfigureWireguard allocates + reserves the wg_ip under a global lock;
unique index on hosts.wg_ip as a backstop against duplicate addresses.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Separate admin console at /admin, gated to is_admin users (EnsureAdmin middleware
+ migration/seed; a plain customer user is seeded to prove the gate). Distinct dark
aesthetic achieved purely by token scoping: .theme-admin overrides every CSS design
token to a dark graphite / signal-orange palette, so ALL shared components (button,
card, badge, table, stat, chart) render dark with zero new markup (R3). Chart island
now reads tokens from its own element, so charts are theme-aware.
Sections (each full-page class-based Livewire, English routes R13, localized DE/EN):
- Overview: fleet KPIs, fleet-growth line, host-load bars, MRR bars, active runs, alerts.
- Customers: table + plan doughnut. Instances: fleet table (vmid/host/storage).
- Hosts: capacity cards (storage/CPU bars). Provisioning: runs table + live stepper.
- Revenue: MRR/ARR/ARPU/churn KPIs, MRR line, plan doughnut, recent payments.
- Locale-aware month labels/currency (Carbon/Number).
18 new Pest tests (guest redirect / non-admin 403 / admin render per section) → 44
green. R12 browser: all six admin pages HTTP 200, ZERO console errors (Chart.js dark).
Codex (R15) — clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
nexxo