The owner's phone shows a blank page on the VPN. That page is the reverse proxy
refusing the request, and it refuses because the phone is not on the tunnel: the
client config routes only the management subnet, so a request to the console's
public hostname leaves over the mobile network and arrives from a carrier
address. It is also why the peer reads "last contact: never" — WireGuard only
handshakes when it has traffic to send, and nothing is ever routed in.
The obvious fixes are both wrong. Adding the server's public address to
AllowedIPs routes the WireGuard endpoint into the tunnel it is trying to
establish. A public DNS record pointing at 10.66.0.1 publishes the internal
subnet to anyone enumerating the domain — the owner raised that himself, and he
was right.
So the console is served INSIDE the tunnel instead. A small resolver and a small
gateway share the hub container's network namespace, which is where wg0 lives,
and answer on 10.66.0.1 directly. A client therefore needs no route beyond the
subnet it already has, the host's docker bridge is never exposed, and the
request reaches the application with its real 10.66.0.x source — which is what
the console's own allowlist checks. The gateway reuses the certificate the
public Caddy already renews: a certificate is bound to the name, not to the
address serving it, so nothing new is issued and nothing internal reaches a
public zone.
Most of this commit is the arithmetic of not lying about it. Review found
fourteen ways the arrangement could report itself working while it was not:
enabling the compose profile after the services were started rather than before;
starting a gateway with empty certificate paths, which can only crash; treating
"container created" as "container running"; carrying a stale readiness marker
through a failed restart; reusing the previous hostname's certificate after a
rename; leaving the profile enabled when the hostname was cleared, in a script
that exits early precisely when nothing else would fix it; reading the renewal
timestamp as a user who cannot traverse Caddy's storage; and a `find | head`
that aborts the whole installer under pipefail the moment two issuers hold a
certificate for the same name.
One of them was mine and worth naming: to let the container read the
certificate, I had made the TLS private key world-readable. On a multi-user host
that hands the console's identity to every local account.
The client is told about the resolver only when both services are confirmed
running, because a config naming a resolver that does not exist takes the
device's entire name resolution with it for as long as the tunnel is up.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
github.* is the documented context alias and exists in 1.20; gitea.* came
later. The runner is pinned instead of :latest — the registration protocol
moves with the server, and a newer runner refuses to register against an older
Gitea.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three things that bit us on every deploy:
- artisan down now renders a branded page that says an update is running and
reloads itself, instead of Laravel's bare 503.
- A page left open across a deploy carries a Livewire snapshot and CSRF token
the new code rejects — the user got "419 Page Expired" and a dead interface.
A 419 from a /livewire/ request now reloads the page; the session is still
valid, so that is all it takes. Hooked at the fetch layer rather than through
Livewire's request hook, whose failure callback is not invoked for this case
in the installed version — verified against a real 419 in the browser, not a
simulated one.
- Vite no longer empties its output directory: wiping it is what left an open
page without its stylesheet mid-deploy, which is the "design is completely
broken" symptom. update.sh also rebuilds the caches with optimize:clear +
optimize instead of leaving them half-warm.
Plus CI: .gitea/workflows/tests.yml (Pest + asset build, and a tested- tag only
on a green main) and an opt-in act_runner service under the ci profile.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The cancel buttons were dead: wire-elements registers Livewire.on('closeModal'),
but the buttons used Alpine's $dispatch, which fires a DOM event. Livewire
bridges its own events TO the DOM, not back, so nothing ever received them.
Proven in the browser both ways — before: modal stays open after Abbrechen;
after: it closes.
Domain operation behind Zoraxy:
- trustProxies for FOR/PORT/PROTO so Laravel sees https (otherwise it builds
http:// URLs into an https page). X_FORWARDED_HOST is deliberately NOT
trusted — the console is gated on the request host, and trusting it would let
anyone reach /admin through a public domain by forging the header.
- APP_URL + VITE_REVERB_* point at the dev domains (wss via ws.dev).
- Vite dev server is now opt-in (VITE_AUTOSTART): over https the browser cannot
load assets from http://<ip>:5173. Built assets are the default, and the
entrypoint clears a stale public/hot, which otherwise 404s every asset.
Verified in the browser over https: login, styled pages, zero console errors,
zero unencrypted requests, /admin reachable only on admin.dev.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Kuma has no write REST API (monitor CRUD is Socket.IO only), so docker/kuma-bridge
translates the exact generic REST contract HttpMonitoringClient already speaks —
no PHP client change needed. Opt-in compose profile 'monitoring'.
Verified end-to-end against a real Uptime Kuma 1.x:
create -> id, create again -> same id (idempotent), list, status, delete
and PHP MonitoringClient -> bridge -> Kuma round-trip.
The e2e run caught a real bug: add_monitor takes 'maxretries', not 'retries'.
Monitoring is now observability, not a delivery gate:
- RegisterMonitoring retries MONITORING_ATTEMPTS times on an outage, then
continues degraded with a visible 'info' event
- RunAcceptanceChecks no longer fails when monitoring isn't green (a fresh Kuma
monitor legitimately reports 'pending' — confirmed in the e2e run); it records
the gap instead. MONITORING_REQUIRED=true restores strict gating.
- docs/monitoring-uptime-kuma.md documents setup, failure behaviour, alternatives
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Image installs wireguard-tools/iproute2; the provisioning worker brings up
wg0 before queue:work so LocalWireguardHub can manage peers.
- ConfirmRemoveHost deletes each run under its run:<uuid> lock so an in-flight
worker can't keep mutating the server or write to a deleted run.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- RunRunner catches step-resolution errors (removed/renamed pipeline) and
fails the run terminally instead of looping forever every tick.
- queue-provisioning worker gains NET_ADMIN + tun + persistent wireguard
volume + published UDP port so LocalWireguardHub can manage wg0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Dedicated 'provisioning' queue connection (retry_after 2400) + worker
(--timeout=2100); AdvanceRunJob tries=1, timeout=2100 on that queue.
- Run lock TTL raised to 2100s so a long step can't be run concurrently by a
duplicate tick-dispatched job.
- StartHostOnboarding creates host+run in a transaction, dispatches after commit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
env_file: .env exported the dev DB/cache config as real container env vars,
which overrode phpunit's forced test env — so the Pest suite ran RefreshDatabase
against the dev MariaDB and wiped it on every run. Laravel already reads .env
from the bind mount; only vite needs VITE_HMR_HOST/VITE_PORT at process level,
now injected explicitly. Tests now use sqlite :memory: and never touch dev data.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude
nexxo