225 Commits (8ac4a38e2e44d9c1a2c10c030b9fab9ca1da5c78)

Author	SHA1	Message	Date
nexxo	55b749c129	Release v1.3.94 — die Kurven zeigen wieder, wie ausgelastet der Host ist ... Drei Punkte des Besitzers, und der dritte hat den eigentlichen Fehler freigelegt. Die Verlaufslinien sahen komisch aus, weil sie auf ihr EIGENES Minimum und Maximum skalierten. Ein Host mit 0,2 % CPU, der zwischen 0,1 und 0,3 schwankt, zeichnete damit einen Seismographen über die volle Höhe — und widersprach flach der Zahl direkt daneben. Dieselbe Regel stand im Chart.js-Entwurf schon ausformuliert ("eine automatisch skalierte Achse lässt 3 % wie eine Wand aussehen") und ging beim Umstieg auf die Kacheln verloren. x-ui.spark bekommt deshalb `min`/`max`. Ohne Angabe bleibt alles wie bisher — das ist, was jeder bestehende Aufrufer übergibt. Die Prozent-Kacheln geben 0 und 100 mit, die Netz-Kacheln nur die 0, weil MiB/s keine natürliche Obergrenze haben. Ein untätiger Host zeichnet jetzt vier ruhige Linien statt zweier wogender und zweier flacher — vorher wirkte CPU (0,2 %) belebter als RAM (3,6 %), also genau verkehrt herum. Dazu: Werte außerhalb der Grenzen werden geklemmt statt aus dem Kasten gezeichnet, die Fläche ist ein Verlauf statt einer harten Kante, und die Linien sind mit 120×40 statt 80×32 lesbar. Ich hatte max=100 zwischendurch selbst verworfen, weil es "zu tot" aussah — auf einem Bild, auf dem die Füllung wegen eines CSS-Fehlers gar nicht gezeichnet wurde. Ein Vergleich mit einem kaputten Bild. Der Fehler: `.spark path { fill: none }` schlägt als CSS-Regel das Präsentationsattribut fill="url(#…)". `fill: none` gehört an die Linie, nicht an jeden Pfad. Die Ausstattung ist wieder einzeilig. Sechs Felder, sechs Spalten — und die Bau-Kennung steht nur noch im Titel: als eigene Zeile zwang sie die ganze Tafel in eine zweite Reihe, für eine Zeichenkette, die fast niemand liest. Und die Wartezeit: die Seite stößt beim Öffnen eine Sammlung an, wenn noch keine Messwerte da sind, statt bis zum nächsten minütlichen Lauf leer zu bleiben. Ein leerer Kasten liest sich als "kaputt", nicht als "gleich". Der Job ist ShouldBeUnique, zwei geöffnete Seiten reihen also keine zwei ein. Codex-Befund dazu (P2): das galt auch für Hosts, die der Sammler ohnehin überspringt — ein Host mitten in der Übernahme hat keinen Token, und seine Seite hätte die ganze Flotte abgeklappert und die eigenen Kacheln trotzdem leer gelassen. Wer gesammelt wird, steht jetzt einmal am Modell (Host::collectable), gelesen von Job und Seite. Zwei Fassungen dieser Frage waren genau der Grund. Geprüft: 2307 Tests grün, Pint sauber, Codex ohne Befund. Der Test für den Maßstab prüft jetzt auch die echten Aufrufstellen und nicht nur das Bauteil — gegengeprobt durch Entfernen von max=100, dann fällt er. Im Browser beide Fälle angesehen: ruhiger Host vier flache Linien, ausgelasteter Host lesbare Form, null Konsolenfehler. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-01 11:56:10 +02:00
nexxo	589489a9fc	Release v1.3.92 — sechs Kacheln statt dreier ungleicher Kästen ... Nach der Vorlage des Besitzers. Zustand, Speicher und die gemeinsame Kurve standen nebeneinander: zwei davon halb leer, die dritte überfüllt, und die gemeinsame Kurve brauchte eine Legende, um zu sagen, welche Linie welche ist. Eine Reihe je Kachel löst alle drei Beschwerden auf einmal. Die Beschriftung der Kachel benennt die Reihe, also braucht es keine Legende mehr. Die Höhen sind durch das Raster gleich statt zufällig. Und der leere Platz ist mit Messwerten gefüllt, die es ohnehin schon gab: Proxmox' Aufzeichnung liefert Netzdurchsatz in beide Richtungen mit, ungefragt. Sechs Kacheln: CPU-Auslastung, RAM-Auslastung, Speicher (als Ring), Eingehend, Ausgehend, Zustand. Gebaut mit x-ui.metric, x-ui.spark und x-ui.ring — die gab es alle schon, und der Kopfkommentar von x-ui.metric sagt selbst "exactly as the approved template draws it". Nichts daneben neu gebaut. Die öffentliche IP steht jetzt auf der Seite. Sie stand vorher NUR klein unter der Überschrift — die Adresse, unter der der Host wirklich erreichbar ist, war in der Detailseite nirgends ein Feld. Sie führt jetzt die Ausstattungs-Tafel an, und die Reserve-Eingabe ist mit dorthin gezogen: die Kacheln zeigen, was gemessen wurde, die Tafel, was eingestellt ist. Ein Eingabefeld zwischen Messwerten sähe aus, als ließe sich eine Messung ändern. Alle vier Verlaufslinien tragen denselben Ton. Die Regel steht im Bauteil selbst — "muted where the figure is observed, accent where it can be acted on" —, und hier ist keine Zahl anzufassen. Vier verschiedene Töne nebeneinander behaupten einen Unterschied, den es nicht gibt. Zwei Funde aus der Prüfung -------------------------- - x-ui.spark warf fehlende Messwerte per array_filter heraus und verband die Nachbarn. Zwei Fehler auf einmal: die Linie behauptete eine Messung, die es nicht gab, und alles danach rutschte nach links — eine Stunde mit zwei Lücken zeichnete sich als achtundfünfzig Minuten. Die x-Lage kommt jetzt aus dem Platz in der URSPRÜNGLICHEN Reihe, und zusammenhängende Messwerte werden als eigene Züge gezeichnet. Eine saubere Reihe ergibt genau einen Zug und dasselbe Bild wie vorher, was alle bisherigen Aufrufer liefern. - Der Zwischenspeicher überlebt einen Deploy. Ein Eintrag aus v1.3.91 kennt netin/netout nicht, und die Host-Seite wäre 55 Sekunden lang an einem fehlenden Schlüssel gestorben — genau in der Minute, in der jemand nachsieht, ob das Update durch ist. Der Schlüssel heißt jetzt host-load:v2:<id> und wandert mit der Form mit. Und einer, den kein Prüfer gemeldet hat: beim Zerlegen in Züge stand im Flächenpfad ein `L` unmittelbar vor einem `M`. Gültig gelesen, nicht gezeichnet — die Füllung verschwand still. Aufgefallen ist es beim Ansehen der Seite, nicht durch eine Meldung; jetzt prüft ein Test, dass jeder Flächenpfad mit M anfängt, mit Z endet und keinen Befehl direkt hinter einem anderen trägt. x-ui.chart behält seinen update-on-Weg, obwohl diese Seite ihn nicht mehr benutzt: er ist eine geprüfte Fähigkeit des gemeinsamen Bauteils, und der darunterliegende Fix (Instanz aus dem reaktiven Alpine-Objekt) gilt für jeden Chart. Geprüft: 2291 Tests grün, Pint sauber, Codex ohne Befund. Im Browser mit eingespielten Messwerten: sechs Kacheln, Lücke als echte Aussparung in Linie UND Fläche, Leerzustand zeigt "—" statt einer Null, null Konsolenfehler über einen vollen Poll-Zyklus. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-01 11:02:55 +02:00
nexxo	665a0c4e08	Release v1.3.91 — die Host-Seite zeigt Last statt Ausstattung ... Die Karte "Rechenleistung" zeigte keine Leistung. 12 Kerne und 63 GB sind die Ausstattung des Blechs und ändern sich nie — sie standen aber im selben Kartenraster wie "Zustand" und "Speicher", die beide leben. Wer die Seite öffnete, um zu sehen, wie es dem Host geht, las dort eine Zahl, die das nie sagen konnte. An ihrer Stelle steht jetzt die Last: CPU und RAM als Stundenkurve, beide in Prozent auf EINER Achse, dazu die aktuellen Werte als beschriftete Zahlen. Die Geschichte kommt aus Proxmox' eigener Aufzeichnung (/nodes/{node}/rrddata), nicht aus einem eigenen Sampler. Ein Sampler hieße neue Tabelle, minütlicher Job, Aufräum-Job und ~1440 Zeilen je Host und Tag — um weniger genau nachzubauen, was ohnehin auf der Platte liegt. Die RRD ist ab der ersten Sekunde gefüllt, auch für die Stunde vor dem ersten Hinsehen, und kann nicht von dem abweichen, was Proxmox' eigene Oberfläche zeigt. Eine Lücke bleibt eine Lücke: ein Punkt ohne Messwert wird null, nie 0, und spanGaps steht auf false. Dieselbe Regel wie in instance_metrics. Antwortet der Host gar nicht, sagt die Tafel das in einem Satz, statt eine ruhige Stunde zu zeichnen — auf dem Testhost live bestätigt. Der Fehler, den das ans Licht gebracht hat ------------------------------------------ x-ui.chart steht überall unter wire:ignore, sonst zerstört Livewire das Canvas. Ein Poll erreicht den Chart also nie. Dafür bekam das Bauteil ein optionales update-on: es hört auf ein Fenster-Ereignis und tauscht die Daten IM bestehenden Chart.js-Objekt. Das lief nicht. Die Zahlen neben der Kurve wanderten, die Kurve nicht, und chart.update() starb still im Legenden-Plugin: TypeError: Cannot set properties of undefined (setting 'fullSize') Grund: die Chart.js-Instanz lag als Eigenschaft im Alpine-Objekt und wurde damit reaktiv umhüllt. Chart.js' Plugin-Innenleben überlebt das Proxy nicht. Gemessen statt geschlossen: dieselbe Instanz wirft über das Proxy und läuft über Alpine.raw(). Sie liegt jetzt in der Closure. Aufgefallen ist es nie, weil bis zum ersten Live-Chart kein einziger Chart in diesem Repo je update() gerufen hat — konstruieren und Erstzeichnen gehen durch die Hülle noch. tests/Feature/ChartLiveUpdateTest.php hält die Regel fest, damit der nächste Live-Chart nicht denselben Nachmittag kostet. Der Rest -------- - Version lesbar: "Proxmox VE 9.2.6" statt pve-manager/9.2.6/7f8d…, mitten in der Bau-Kennung abgeschnitten. Die Kennung steht klein darunter. Eine unerwartete Form wird unverändert durchgereicht statt verschluckt. - Vier Kleinkarten (Mgmt-IP, Node, Version, Instanzen) sind eine Ausstattungs-Tafel geworden. Die Instanzen-Anzahl steht in der Überschrift der Liste, die sie ohnehin zeigt. - Der Übernahme-Fortschritt klappt zu, sobald sie durch ist. Fünfzehn abgehakte Schritte sind auf einem laufenden Host kein Dauerinhalt — aufklappbar über <details>, ohne JavaScript. - PlanVersion::requiredTemplateVmids() ersetzt die dritte Kopie derselben Fensterlogik. - BuildVmTemplate sagt nicht mehr "this takes 10–20 minutes". Das war eine Schätzung vor dem ersten Lauf; gemessen waren es unter zwei. Eine Konsole, die falsch vorhersagt, erzieht dazu, sie zu ignorieren. Geprüft: 2281 Tests grün, Pint sauber, Codex ohne Befund. Die Farbwahl gegen den Validator gerechnet (ΔE 28,3 protan / 39,2 normal; der Akzent liegt unter 3:1 gegen die Fläche, deshalb tragen beide Reihen sichtbare Beschriftung). Im Browser: null Konsolenfehler über einen vollen Poll-Zyklus, und die Kurve wandert auf dem echten Poll ohne Neuladen — mit eingespielten Messwerten belegt, weil die Testhosts in TEST-NET liegen und nie antworten. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-01 10:24:21 +02:00
nexxo	2f15d1e7a4	Release v1.3.84 — VPN-Zugänge nach Personen und Hosts getrennt ... Personen und Hosts standen gemischt untereinander, nach Verbindungszustand sortiert — ein Host-Zugang konnte also zwischen zwei Mitarbeitern stehen. Beide sind Peers im selben Netz und haben dieselben Messwerte, aber es sind zwei verschiedene Fragen: "wer von uns ist im Netz" und "welche Maschinen hängen dran". Wer die eine stellt, liest die Antworten der anderen als Rauschen. Jetzt zwei Gruppen mit Überschrift und Anzahl. Eine Gruppe ohne Einträge wird gar nicht erst gezeichnet — auf einer frischen Installation stünde sonst "Hosts" über einer Lücke, bevor je einer angelegt wurde. Getrennt wird nach der geladenen host-Beziehung, nicht nach `kind`: die Plakette in der Zeile fragt dasselbe, und wer einen "Host-Zugang" liest, soll ihn auch unter den Hosts finden. Ein adoptierter Peer (kind=system) mit host_id gehört zu den Hosts, obwohl seine Art etwas anderes sagt. Die Zeile selbst ist nach resources/views/components/admin/vpn-peer-row.blade.php gewandert. Sie zweimal hinzuschreiben hätte geheissen, sie ab dem nächsten Knopf an zwei Stellen zu pflegen — und die zweite fällt erst auf, wenn jemand einen Host-Zugang sucht und ihn anders aussehen sieht als seinen eigenen. Die Plakette bleibt trotz der Überschrift daneben: eine Zeile wandert beim Suchen aus ihrer Überschrift heraus, und dann steht sie ohne sie da. Codex: keine Befunde. 2237 Tests grün. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-01 02:34:15 +02:00
nexxo	ac81bc5b98	Release v1.3.82 — Übernahme-Befehlszeile neu ausstellen ... Die Zeile gab es genau einmal: auf der Seite direkt nach dem Anlegen. Wer sie dort nicht kopierte — oder wem sie wegbrach, wie beim WireGuard-Fehler bis 1.3.80 — hatte danach einen Host in der Liste, für den es keinen Weg zu einer Befehlszeile mehr gab. Ein zweites Anlegen scheitert an der eindeutigen IP, also blieb nur Entfernen und von vorn. HostTakeoverCommand behauptet in seinem Kopfkommentar, die Zeile werde "an zwei Stellen gezeigt (beim Anlegen und beim Neuausstellen eines Codes)". Das Zweite gab es nie — ein Kommentar, der eine Absicht beschreibt und wie eine Beschreibung des Gebauten klingt. Neu: ReissueTakeover als Modal auf der Host-Detailseite. Bestätigen zuerst (R23), denn ein bisher ausgegebener Code wird dabei wertlos; danach steht die ganze Zeile mit Kopieren-Knopf darin, nicht nur der Code. Codex, zwei Runden, beide Male dieselbe Sorte Fehler von mir — die Ansicht versteckt den Knopf, die Methode prüft nichts: - P1: `issue()` erzwingt jetzt selbst, welcher Zustand zulässig ist. Ein Modal, das offen blieb, während der Host aktiv wurde, rief die Methode trotzdem; eine Livewire-Methode ist ohnehin von aussen aufrufbar. - P2: `issue()` prüft die Tunnel-Einstellungen erneut. Sonst wird ein gültiger Code entwertet und dafür eine Zeile ausgegeben, der die WireGuard-Angaben fehlen — genau die kaputte Zeile, vor der die Warnung daneben steht. - P1 der zweiten Runde: `disabled` gehörte nicht in die Liste der zulässigen Zustände. Es sieht aus wie "noch nicht fertig" und ist das Gegenteil — toggleMaintenance() schaltet einen LAUFENDEN Host so still. Der Knopf hätte eine Produktionsmaschine zur Neuinstallation angeboten. Die Bedingung steht deshalb einmal am Bauteil (ReissueTakeover::eligible) und wird von Ansicht und Methode gefragt: zwei Fassungen liefen auseinander, sobald jemand eine ändert. 2231 Tests grün. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-01 01:00:53 +02:00
nexxo	4f037c8264	Mahnwesen: Einstellungen und die zwei Eingriffe von Hand	2026-07-31 22:43:52 +02:00
nexxo	fb1ef3fc63	Rollen: aufklappbare Karten, gruppierte Rechte, Knopf im Raster	2026-07-31 22:39:46 +02:00
nexxo	29c2718235	R20: Begruendung im Modal, und der Waechter sieht jetzt auch Listenzeilen	2026-07-31 22:09:05 +02:00
nexxo	7f7b654fcb	Zahlungsprobleme: geplatzte Kaeufe aufzeichnen, beide Arten an einer Stelle	2026-07-31 21:58:52 +02:00
nexxo	93e848d3f9	Rollen und Rechte in der Konsole zuweisbar	2026-07-31 21:46:22 +02:00
nexxo	6a6a672c11	Pruefergebnis als Modal statt am Seitenende	2026-07-31 21:36:43 +02:00
nexxo	f91726d078	Testergebnis erscheint am Feld statt am Seitenende; DNS-Token bekommt einen Testknopf	2026-07-31 21:26:14 +02:00
nexxo	b8a774b604	Portal: Karte tauschen, offene Rechnungen begleichen, Hinweis bei Faelligkeit	2026-07-31 21:12:31 +02:00
nexxo	0944de7cfa	Passwortrichtlinie einstellbar, doppelte Anmelde-Mail behoben	2026-07-31 20:53:19 +02:00
nexxo	200df30b9d	Hetzner-Cloud-DNS, Bereitschaftsseite aus sich heraus behebbar ... Die alte Hetzner-DNS-API ist abgeschaltet (301 auf die Weboberflaeche). Jede Bereitstellung starb in ConfigureDnsAndTls, nachdem der Kunde bezahlt hatte. HttpHetznerDnsClient und DnsTokenCheck sprechen jetzt die Cloud-API: Bearer statt Auth-API-Token, RRSets ueber {name}/{typ} statt Record-IDs, der Zonen-Lookup entfaellt. Gegen das Live-Konto gemessen, nicht geraten. Drei Fallen, die am Konto gemessen wurden: TXT-Werte muessen in Anfuehrungszeichen (sonst 422, was als read_only gemeldet worden waere), ein Name mit Zonensuffix wird STILL angenommen (201), und der Fake gab andere IDs aus als der echte Client -- zwoelf Tests waren gruen ueber einem Abbau, der im Betrieb geworfen haette. Bereitschaftspunkte, die nur eine Shell beheben konnte, sind jetzt bedienbar: SSH-Schluesselpaar erzeugen (Ed25519 ueber phpseclib, privater Teil direkt in den Tresor), Stripe-Katalog abgleichen (Warteschlange, Trockenlauf, Ausgabe wortgleich), Mailzustellung als Schalter statt MAIL_MAILER, Neustart der Arbeiterprozesse. Stripe hat jetzt alle drei Werte in der Konsole: Secret Key, Signatur-Secret (Tresor, je Modus getrennt) und Publishable Key (Klartext). Codex-Review (R15), zwei P1 behoben: der Signaturschluessel faellt nicht mehr vom Live- in den Testplatz, und eine Record-ID aus der alten API macht einen Host nicht mehr unloeschbar -- was adressierbar ist, wandelt eine Migration um, der Rest wird beim Loeschen laut uebergangen statt geworfen. 2109 Tests gruen. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-31 19:50:01 +02:00
nexxo	cfaea7dc82	Fill the hostname page from the installation, not from a blank form ... The page was empty, and that was a design fault rather than a missing button. I built a register that starts blank — while the installation already serves half a dozen names whose certificates were exactly what the operator wanted to see. An overview you have to populate first does not answer "what do I have". So the names are derived now, from the same configuration routes/web.php builds its domain bindings from: SITE_HOSTS, APP_HOST, FILES_HOST, ADMIN_HOSTS. If a name is in the environment, the application answers on it, and then it belongs in this list without anybody typing it a second time. Opening the page syncs them; the list is never empty again. Syncing and measuring are deliberately separate. The sync costs nothing and runs on page load. The measurement goes out over the network and runs on the button or on a schedule — doing it on page load would mean waiting through half a dozen TLS handshakes, and one of them is always the name that currently does not resolve. Which is the other half of what was missing: there was no overview because nothing measured unless somebody pressed a button. A daily run at 04:17 fills it, because the question that matters is not "is it valid right now" but "is renewal running" — a certificate expiring in forty days is fine, the same one at twenty means something has been broken for a week. Only a measurement taken while nobody is looking can tell those apart. The page now opens with four counts — total, valid, expiring soon, without a certificate — and says when it last measured. A name that comes from the environment is marked as such and cannot be removed here: it would come back at the next sync, and a button that does nothing is worse than no button, because it gets believed once. 2040 tests pass, assets build. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-31 00:53:12 +02:00
nexxo	006ce3568b	Manage hostnames and watch their certificates from the console ... files.clupilot.com is why this exists. DNS pointed at the right machine, the env var was set, the release was deployed — and there was still no certificate, because /etc/caddy/Caddyfile is maintained by hand and nobody thought of it as a second, separate step. Nothing in the console would have said so. Three settings looked correct and the address did not answer. So the page holds two things side by side. The WISH — which names should be served — and the REALITY: whether the name has a certificate and for how much longer. The second is measured by opening a TLS connection and reading the expiry, not by reading configuration, because the configuration is exactly what looked right while the address was dead. verify_peer stays on: a certificate that fails validation is not a certificate for this question, and a display that called it valid would be the fake R19 records. Applying goes through the existing agent, not a new channel. The console writes a request, the path unit wakes the agent within a second, and the agent calls one fixed command line of the root-owned helper. What that helper is allowed to do is the careful part. It fetches the list ITSELF rather than being handed one, and the list is HOSTNAMES, never Caddy blocks — `php artisan clupilot:proxy-hosts` prints `<name> <purpose>` and nothing else. Each name is matched against a strict pattern before it is used, and the template around it lives in the helper, which the service account cannot touch. install-agent.sh already states the principle for the sudoers grant: a grant is only worth anything if the holder cannot change what it grants. A service account that could write proxy configuration would have everything the proxy can do — redirects anywhere, files from any directory. Purpose is a column rather than a habit. A console name gets the network lock, a public one does not, and a console name published without it looks exactly like a working page. Removing takes the name out of the list and NOT out of the running proxy. Two decisions in one click, and the second one takes a site off the air. There is deliberately no "renew" button. Caddy renews on its own at two thirds of the lifetime; what an operator actually needs is a second attempt after an issuance has failed, and that is a reload — which is what Apply does. Thirty days is treated as a problem rather than a warning: at ninety days' lifetime, a renewal should long since have run, so anything under it is not a tight certificate but a renewal that is not happening. The ACME contact falls back to the owner's address, because a contact nobody reads is the step before expired customer certificates. CONTRACT and HOST_STEP_NEEDS both move to 2, which is what tells a server carrying the older helper to run the installer again — caught by the guard test that compares the two halves. 2035 tests pass, assets build. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 22:55:55 +02:00
nexxo	2194ab8079	Put the instructions where somebody reads them before they start ... The previous commit shipped the guide AFTER the host was created. Its first two steps happen at the provider — order the machine, boot the rescue system — and whoever reads them there has the one-time code already in the clipboard with its 24-hour window running. The instructions were correct and in the wrong place, which is its own kind of wrong. Six steps now, not three, and the two provider ones are named rather than assumed. They are marked "first" so the list does not read as something you can start at the top of and work down: step 2 is half an hour of waiting, and doing it inside a running code is exactly the mistake the page should prevent. All six are visible the whole time, including the done ones and the ones still to come. A guide that shows only the current step cannot answer "how much is left", which is the question somebody has while a server they are paying for sits in a rescue system. It is on the hosts list too, collapsed. Somebody standing there may not have ordered the machine yet — and that is step 1. Requiring them to click "add host" to find out what the procedure is puts the answer behind the action it describes. One component, two places, so the archive address in the instructions is the same string the command line will carry. Two copies of that would drift, and the difference would surface on a server that has already been paid for. The step-4 command box moved into the guide rather than sitting beside it, so after creating a host the whole procedure stays on screen. Somebody stuck at step 5 should not be looking at a page that has become a single box. 1991 tests pass. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 20:51:47 +02:00
nexxo	903ebdd2b2	Give the operator one line to copy and three steps around it ... The console could describe a takeover it had no way to start. This is the vertical slice that closes that: a one-time code, the archive the rescue system fetches, and the page that says what to do with both. The command carries EVERYTHING the script needs before the tunnel exists, because there is nothing to fetch — that is the whole point of spec §5. Which means CluPilot generates the WireGuard keypair and admits the peer at the hub before the machine has ever booted, and hands the private half over in the line. It is worthless within minutes: task 9 of the script replaces it with one generated on the machine. Shown exactly once. The database holds only the code's hash and never the private key, so leaving the page does not bring it back — it mints a new code, which invalidates the old one. That is deliberate: a glance at somebody's screen should be worth nothing an hour later. Which is also why save() no longer redirects. Sending the operator to the host detail page sends them away from the only value they need, and an existing test asserted that redirect — it now asserts the opposite, with the reason written next to it. SHA-256 rather than bcrypt for the code, and the reason is not speed. Both endpoints have to FIND the host by the code; with bcrypt that means trying every row. The code is 32 characters of CSPRNG output, so it has the entropy that stretching exists to manufacture. resolve() and claim() are separate because progress reports arrive BEFORE registration. If reporting consumed the code, a host could never register after its first message. The archive URL is always the public hostname. The console runs under admin.…, but this line executes on a machine that must not reach the admin area — it is locked down for exactly that reason — so route() from the console would emit a hostname that 404s on a server only reachable through the provider's console. The page warns about missing tunnel settings BEFORE the host is created, not after. An empty hub key produces a line that looks clean, copies fine, runs, and ends in a tunnel that never handshakes — discovered on the machine, after somebody has already paid for it. The three steps lead with the rescue system, because that is the one nobody knows by heart, and it says enabling is not the same as booting into it — the script refuses a running production machine, which is what a half-done switch looks like from the inside. 1986 tests pass. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 20:40:19 +02:00
nexxo	880b5f1998	Merge main into the operating-mode branch ... Three real conflicts, and one file that did not conflict and mattered more. Overview::notices(): both sides added notices. Kept all of them, and pointed main's mail check at MailboxTransport::NON_DELIVERING — its own comment already named the constant while the code carried a copy of the list. billing.blade.php: main wrapped the page in a contract branch. The "payment is not set up" error moved OUTSIDE it, because the customer most likely to meet that message is the one buying for the first time, who has no contract yet and would never have seen it from inside the @else. ConsoleReportsRealDataTest: kept both sides rather than choosing. The renamed test and its docblock explain why admin.systems_ok can no longer be asserted on a bare install; main's mail pin still keeps "clean" clean in the mail dimension. Picking one would have quietly weakened the other's claim. HostStepsTest: git combined main's config()->set('provisioning.dns.zone', 'clupilot.com') with this branch's assertion on clupilot.cloud, and produced a test that contradicted itself with no marker. Main's approach is the better one — it pins the zone in the test and asserts the SHAPE of the name rather than this box's domain — so its assertion stands. HttpStripeClient merged silently and correctly: secret() still throws, isConfigured() still reads the vault directly. Had it taken main's filled($this->secret()), six callers that ask in order NOT to get an exception would have become exception throwers, and the suite would have stayed green. CheckoutWithoutStripeKeyTest is the lock that would have caught it. StripeIdempotencyKeyTest (new on main) leaned on the environment fallback for stripe.secret. That entry is strict now — no fallback in either direction, so the .env cannot be a back door for a live key in test mode. It stores a real vault row instead. 1966 tests pass. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 17:53:20 +02:00
nexxo	52aacddc56	Store the agreement where the web process can actually read it ... Every link on the agreement page answered 404 — the download visibly, the two inline ones just as dead — and nothing anywhere said why. The files were there, whole and correct. An artisan run inside a container is root; PHP-FPM is www-data. Laravel's local disk creates a PRIVATE directory, which is 0700, so `dpa/` came out as root-only. The web process could not enter it, `Storage::exists()` answered false, and the routes did exactly what they were told: abort 404. No exception, no log line, a page full of links to nothing. Both writers — the command and the console's upload form — now store with "public" visibility, which is the file MODE and nothing to do with the web: 0755/0644 instead of 0700/0600. The disk's root is outside the document root either way, and the two routes still check who is asking. The command also warns if a file it just wrote is not readable, because the alternative is finding out from a customer. The download itself now looks like one: the `download` attribute on both anchors, and in the console a bordered control rather than a third link in a row of two. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 17:19:39 +02:00
nexxo	955f1b874f	Deliver the processing agreement, and hold the proof it was accepted ... Art. 28(3) GDPR wants a contract wherever personal data is processed on somebody else's behalf, which is the whole of what this product does. "In writing" there includes electronic form (Art. 28(9)), so a document the customer can read plus a recorded acceptance is enough — no signature on paper. The website already promises "AV-Vertrag inklusive", which means it has to be obtainable without asking us for it. It was not obtainable at all. **The text is never this application's.** An operator uploads the document their lawyer wrote, names the version, and publishes it; the measures ride along as a second file, because they are an annex to the agreement and "which measures applied when this customer accepted" has to have one answer. Inventing the text here would have been worse than having none. **Uploading and publishing are two acts.** Acceptance is per version, so publishing leaves every customer who accepted the previous one outstanding again — correct, and far too expensive to trigger by dropping a file on a form. It goes through a confirmation modal that says exactly that (R23). **The customer's side** is a card in the contract tab: read the agreement, read the measures, one press to conclude it. What that press records is what makes it evidence rather than a flag — the version, the moment, the address it came from, and the login that pressed. Pressing twice is one agreement (unique index, not a check somebody can forget), and a superseded acceptance is kept rather than overwritten: it was true when it was made, and the history is the point. Nothing renders until a version is in force. A card offering an agreement that does not exist is worse than the silence. The files live on the private disk and are served through routes that check who is asking — an agreement is not a public asset, and a guessable URL to one would be a list of who our customers are. The customer route takes no version parameter: which document applies is ours to say. `dpa.manage` is its own capability on the OPERATOR guard. Whoever keeps the platform running does not thereby decide what every customer is asked to agree to — and a capability written under `web` since the 2026-07-29 move lands in a guard nothing authenticates against, which is how this one first shipped answering 403 to a role that visibly had it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 16:56:57 +02:00
nexxo	1056dddc62	Take the address by field, fix the customer type, ask why they leave ... **The billing address was one textarea**, so what landed in it was whatever somebody typed: a postcode on the street line, a city with no postcode, no country at all. It is four fields now — street, postcode, town, country — in the customer's settings and in the console's customer editor, which had its own free-text copy of the same field and would have had an operator's correction silently reverted the next time the customer saved. `customers.billing_address` is neither dropped nor parsed: guessing which line of an existing block is the street would put a postcode where a street belongs on a document nobody can correct afterwards. It becomes the COMPOSED form, rewritten from the fields on every save, so IssueInvoice and everything else that reads it keep working, and a record nobody has re-saved keeps the block it always had. **The customer type is fixed once it is on record.** It decides the fourteen-day right of withdrawal, and a business able to set itself to "Privatperson" on this page is a business able to withdraw from a contract it may not withdraw from. Registration asks the question; this page reports the answer, and saveProfile refuses to answer it a second time — in the component, not by hiding a radio, because a form that hides a control has never stopped anybody who can post to /livewire/update. A record created before the question existed may still be given one, once. The panel is a fact rather than a form now, which is also what was odd about it, and the sentence about who has the right of withdrawal is gone. **Cancelling asks why.** A reason from a fixed list, required, with a note beside it that "Sonstiges" cannot go without — the one fact worth having about a departure, asked at the only moment the customer is looking at the question. It lands on the contract (`cancel_reason`, `cancel_reason_note`). And where the fourteen days are still running, the dialogue offers the WITHDRAWAL as a way out of itself rather than as one more reason inside it: withdrawing ends the service the same day and sends the whole amount back, cancelling keeps the term that was paid for, and somebody entitled to the first should not lose it by taking the second unasked. A business is never offered it — WithdrawalRight answers that, not the template. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 16:41:32 +02:00
nexxo	49d528dbea	Fix round: point at the real tab, hide the button nobody can press, prove the quiet page load ... Fixes four Important findings from the review of Task 12. Corrected nine check `tab` values at the source (BillingChecks was already correct; OnboardingChecks/ProvisioningChecks/DeliveryChecks all carried the pre-redesign 'integrations' value, which is not a member of Integrations::TABS): four onboarding checks now point at 'platform' or 'env' depending on where their field actually is, five provisioning/delivery checks point at 'services'. checkUrl()'s match-block resolver — praised as correct for the six checks that point at a genuinely different admin page — is unchanged; its `default` arm is now a pure safety net, not a route any check actually relies on. Wrapped the "Prüfen" button in @can('secrets.manage'): mount() admits hosts.manage OR secrets.manage, but runCheck() requires secrets.manage alone, so an Admin-role operator could see a button that 403s on press. Fixed a docblock on HEARTBEAT_KEYS that asserted a staleness threshold was kept in sync with OperationChecks::STALE_AFTER_MINUTES — that constant is a key/settings-name map with no threshold of its own, and no such synchronisation exists. Three new tests, each confirmed red against a deliberately reintroduced version of the bug it covers before being confirmed green: every check's tab value against where its field actually lives, the run-check button hidden from an operator who cannot press it, and Http::assertNothingSent() after a plain page load. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 16:26:10 +02:00
nexxo	1d4e98eb06	Rebuild the customer's settings page as four tabs ... It was one column 768 pixels wide inside a 1240-pixel shell — a third of the window empty beside it — holding everything a customer might ever change: the company address, their password, two-factor, the devices they are signed in on, the branding of their cloud, the contract, and the button that closes the account. Two thousand pixels of scroll, and the way to a particular thing was knowing how far down it lived. Four tabs, by what somebody came to do: their details, security, the appearance of their cloud, the contract. The same tab bar the console uses, so one vocabulary holds on both sides of the login, and the choice lives in the query string — `#[Url(history: true)]`, no `except`, so the parameter is there from the first render and a link to this page can name the part it means. An unknown tab out of the address falls back to the first rather than rendering a settings page with no section on it. The width is used now. Inside a tab the short cards sit side by side instead of each taking a full row to hold three lines: the customer type beside the company form (it is one question, and beside the VAT field it was mistaken for it), the password beside two-factor, the logo beside the colours, the contract beside the closing of the account. Also: the subtitle listed the old sections by name. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 16:25:10 +02:00
nexxo	ff92466b47	Give the order a checkout page, and stop hiding what a year costs ... **There was no checkout page.** The package list posted straight to Stripe, so the last thing a customer saw in this product's design was a grid of cards and the next was somebody else's form asking for a card number. What they were buying, what it costs in total, what happens afterwards and what they were agreeing to were never stated in one place. App\Livewire\Checkout is that place: the package and its figures on the left, a sticky summary on the right — net, the saving where there is one, the setup fee, the tax, what is due today, and what will be charged after it. Every figure comes from the catalogue, TaxTreatment and SetupFee, the same three the checkout itself reads; nothing is recomputed, because a summary that works out its own total is a second answer waiting to disagree with the one Stripe is handed. **The terms acceptance moved to where the money is spent.** It sat at the top of the package list as a condition of LOOKING at prices, with every button dead beneath it. It is a condition of buying, so it is now at the foot of the summary, directly above the button — after the total, which is the order those three things are read in. The package list has no form on it at all now; its buttons are links. **The page used the left half of a 1240px shell.** A 68-character title, a switch under it and an 80-character footnote, beside a grid that used the whole width. Now: a header band with the name left and the term switch right, where a control belongs, and a closing band of three columns instead of a paragraph trailing off. **The yearly view showed the monthly equivalent as its headline**, so on a package with no free months the big figure did not move at all when the switch was thrown — the page looked like it had ignored the click. The headline is the price of the term in the unit it is charged in; what a year works out to per month is said underneath. Same on the public sheet. **The switch was unreadable.** `text-on-ink` is not in this palette — the ink pairing is bg-ink/text-bg, as x-ui.button has always had it — so the label kept its inherited grey on a near-black pill. And its shell was rounded-lg with rounded-md options inside: two radius scales, one of them Tailwind's untokenised 6px. One scale now, nested. **The mails drew an empty orange tile.** The mark's ascent lives in an SVG the site loads and a mail cannot — Gmail strips inline SVG, Outlook renders with Word, and this layout carries no image by design. The shape is drawn with a character every mail font has, white on the accent tile, with the whole wordmark beside it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 16:00:08 +02:00
nexxo	e83b17ec37	Put every missing field on one page before a customer pays ... Admin\Readiness renders App\Support\Readiness::byGroup() end to end: state, label, breaks sentence and a fix link for every check, a button on the four that have to ask a real service (DnsTokenCheck, WireguardEndpointCheck, VmTemplateCheck, StripeCheck) and only ever run on demand, and one headline line — ready for the operator's current mode, or how many blocking items are still open. Wired into the nav and into Overview's own notice list beside the same gate as Admin\Integrations, since both halves it configures come back together on this page. Fixed two check keys the guard test caught for real: onboarding.ssh_key and delivery.inbound_password did not textually contain the vault key they check (ssh.private_key, inbound_mail.password), which is exactly the kind of silent gap this whole task exists to catch. Renamed to onboarding.ssh_private_key and delivery.inbound_mail_password, with the two existing test files that referenced the old keys updated to match. Also fixed the guard test's own assertion: Pest's toContain() is variadic, so a second string argument is a second required substring, not a failure message (the same trap tests/Feature/ModalHeightTest.php already documents about itself) — it failed on every entry, including ones already covered. Replaced with str_contains()+toBeTrue(), which keeps the check and the message both. Two pre-existing Overview tests assumed a bare install has nothing to report; it now correctly always starts with a readiness gap, so both were narrowed to what they actually test — no invented data, no invented incident. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 15:59:34 +02:00
nexxo	b32c6fc33f	Sell the year as well as the month, and say what it saves ... Both prices have existed since the catalogue did — one `plan_prices` row per term, each with its own Stripe Price, and the checkout has taken a `term` all along. Nothing ever sent one. The shop showed the monthly figure, the order page posted no term, and the yearly Price sat there being paid for by nobody. **The console asks for free months, not a second price.** It used to take the yearly TOTAL as its own free-form figure, so nothing in the system knew WHY 588 belonged to a package costing 49 a month — and no page could say "zwei Monate gratis" without a person working it out again and writing it somewhere it would then drift. Now: the monthly price and how many of the twelve months are free. The total is derived from the two (PlanVersions::yearlyCents), previewed live on the form, and written to the catalogue from the same arithmetic. `free_months` sits on the VERSION, beside the capabilities publication freezes, because that is what it is — part of the terms a customer bought. The migration reads it back out of the prices that already exist rather than defaulting to nought: an installation selling twelve-for-ten must not lose that on a deploy. Only an exact division counts; a hand-negotiated yearly figure keeps its amount and simply goes unexplained. **The customer chooses.** A switch on the order page and on the public sheet, both figures rendered and one shown, so switching costs no request. The headline stays "per month" in either term — a yearly total as one big number reads as five times dearer at a glance — with the amount actually taken, the net figure, the months free and what twelve monthly payments would have cost underneath. The form posts the term the customer was looking at, and the checkout picks that term's Stripe Price. The billing card now says which term is running. It states a monthly figure whatever the term, so a yearly customer was reading a number that never appears on a statement. Also: **a Blade comment must never spell a directive.** Blade compiles what is inside `{{-- --}}` too — the comment is stripped from the output, but its directives are compiled on the way there. A comment explaining why the parenthesised php directive had been avoided produced exactly the open PHP tag it warned about, and the rest of the file was swallowed as PHP source: no exception, no warning, the page one block short. That is how the term switch vanished after being written. BladeCommentsTest scans for the forms that open a tag. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 15:44:35 +02:00
nexxo	fed4acf31c	Accept terms instead of a start date, and fix the sender no server accepts ... **The test mail was rejected: "553 5.7.1 Sender address rejected: not owned by user no-reply@…".** Every purpose mailbox here has its own SMTP account, and a mail server lets an account send only from the address it owns. Mail::to() hands back a pending mail bound to the DEFAULT mailer and sendNow() then ignores the mailer the mailable asked for, so a mail addressed support@ went out over the no-reply@ login. It sends through the mailable's own mailer now, and the cloud-ready preview — the one mailable with no mailbox at all — takes the provisioning mailbox like the real notification does. Writing the test for that found the same bug in production code: **InvoiceMail and OrderConfirmationMail set their From to billing@ and never named a mailer**, so both went out over mail.default's no-reply@ login. On this installation no customer had ever received an invoice mail or an order confirmation; they rendered perfectly, queued without complaint and were refused at the door. MailSenderOwnershipTest now scans for the mismatch: a mail that takes a mailbox From must use that mailbox's mailer. **The box on the order page accepts the terms now**, not an immediate start. It used to carry the whole FAGG §16 sentence, which read like a choice between "now" and "in fourteen days" — and there is no second option. The terms are what regulate the sale, so they had to exist: resources/views/legal/terms.blade.php replaces the placeholder with fourteen sections written from what this software actually does — the delivery, the capacity queue, the full refund on withdrawal, the cancellation at period end, the deletion deadlines. The company data comes from CompanyProfile, so the page and the invoices cannot drift. No availability figure and no liability cap has been invented. No order goes through without it: the button is unusable until the box is ticked and says why, and CheckoutController still refuses server-side — the browser half refuses nothing. The request field is `terms_accepted`; the Stripe metadata key stays `immediate_start`, because a session opened before a deploy is paid after it and the webhook would find nothing under a new name. **"Wird der Account nach fünf Tagen gelöscht?"** Only an unconfirmed one. That was the whole of what we said, so the answer looked like yes. The second rule now exists and is stated: PruneDormantAccounts removes a confirmed account after a year when it never had a package — no customer record at all, which is where every order, contract and seven-year invoice hangs. A fortnight's notice goes out first, once, and `dormant_warned_at` is what permits the deletion: an account whose warning never went out is never removed. Signing in resets the clock, measured off the device rows because users has no last_login_at. Both deadlines are said in the portal settings, on the verification page, and in the terms — each reading the number off the command that enforces it. Also: the wordmark scan matched any element whose text merely BEGINS with the company name, which a paragraph of terms does. It looks for the lockup form now (no whitespace after the tag), which is what it was always about. The seven checkout tests in the parallel session's files were posting the old field name and now post the new one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 15:22:35 +02:00
nexxo	96f171b3b3	Put the switch where it governs, and say when it is thrown ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 15:09:38 +02:00
nexxo	c354ad1463	Make mails readable on a phone, and let an operator look at one ... Three things the owner reported, and one sentence that promised something this product does not do. **The mails had a fixed width.** components/mail/layout.blade.php set width="600" and width:600px, so every phone showed a 600px canvas in a 390px window and one had to scroll sideways to read a sentence. Now the table is width="100%" with max-width:600px — fluid, with 600 as a ceiling rather than a floor. A mail cannot fix this with a media query (Outlook renders with Word and drops <style> blocks), which is why the whole file is inline attributes and why the shrinking has to be built in. Side padding went 40px -> 24px in the layout and in all nine mail views: 40 each side leaves 278px of a 390px screen to read in. **There was no way to look at a mail.** An invoice mail needs an invoice, a maintenance announcement needs a window, and "register an account to see whether the confirmation reads well" is not a workflow — which is how the fixed width survived for months. App\Services\Mail\MailPreviews builds all nine from sample data, every record with make() and never create(), so a preview leaves no invoice, order or window behind and draws no number from a series. Two ways to see one: in a tab as the document itself, or sent to the signed-in operator's own address. There is no recipient field — that would be a form for mailing strangers. sendNow(), not send(): every mailable here implements ShouldQueue, and send() defers to the queue for those, which would have put a failure in a worker's log while the button reported success to somebody waiting for the mail. The test caught that. **The booking page had no shell.** Order declared layouts.portal — the bare shell the sign-in pages use, no navigation and no padding — so the page sat flush against the top and bottom of the window with no way back to anything. layouts.portal-app, like every other portal page. **The consent box said something untrue.** Its refusal read "otherwise we can only build your cloud once the withdrawal period has ended", which describes a path that does not exist: nothing here delivers fourteen days later, and an unticked box simply means no order. Said plainly now, and said on the page before somebody runs into the refusal. Also: GrantedPlanPortalTest asserted assertDontSee('179'), which matches any id containing those digits — and ids climb through a suite run because a rolled-back transaction does not reset an auto-increment counter. It passed alone and failed in company. Asserts on '179,00' now, which is what a leaked price would actually look like. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 14:50:37 +02:00
nexxo	3e7026407b	Stop inventing a package, and rebuild the booking page ... Two pages said opposite things about one account, straight after registering: the dashboard said "noch keine Instanz", and Paket & Addons said "AKTUELLES PAKET Start — Status Aktiv". The dashboard was right. The package page fell back to `$instance?->plan ?? 'start'` and rendered that fallback as a contract the customer had entered into, complete with a status of Aktiv, on the one page somebody opens to find out what they pay. The contract is resolved from the CUSTOMER now, not from the instance — a paid order parked for want of a machine has a subscription and no instance yet, and asking the instance would tell somebody who has paid that they have no package. An instance counts as well, whatever its subscription row says. With neither, the page says so and points at the booking page: an "Upgrade" from nothing is a purchase, and that has its own page. The cart stays outside that gate. A customer can have something in it before they have any contract at all, and hiding it there would hide the thing they came to pay for — which is what my first version did, and seven existing tests said so. And the booking page. Five cards in a four-column grid left the fifth alone on its own row, reading as a mistake; the consent box sat at the BOTTOM with every buy button disabled until it was ticked, so the page arrived looking broken before anybody had done anything wrong; and the price ran across the card in one block with nothing to compare. Now the consent comes first, because it is the condition for everything under it, and it colours itself green once given. Three columns, so five plans read as 3 + 2. Each card is the same four rows in the same order — price, delivery, what you get, the button — so the eye can run across a row and compare like with like. The button stays ENABLED with the reason it will not go through said under it: a disabled control explains nothing, and the server is the gate either way. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 14:29:22 +02:00
nexxo	2321854967	Discard an unconfirmed registration, and sweep the abandoned ones ... "Abmelden und neu registrieren" was advice that could not work. Signing out frees nothing: the address is still held by the unique index, so registering again with the address somebody meant fails — and every abandoned attempt stayed in `users` for ever. Reported exactly that way, and it was right. The button discards the account instead. Only an UNCONFIRMED one, and only one with nothing behind it: the webhook creates a customer's login from a paid checkout, so a user can sit on this page unconfirmed while already having a contract, and deleting that is data loss dressed up as a convenience. It refuses and says where to go. A confirmed account is closed, not discarded — that is ConfirmCloseAccount, with an invoice history behind it. R23: confirmed in a modal. The modal mutates nothing; it dispatches the event the page listens for, so the checks stay in the one place they already are rather than being duplicated where they could drift. And nothing has to be discarded by hand. clupilot:prune-unverified removes registrations nobody confirmed after five days — long enough for somebody who signed up on a Friday and found the mail in a spam folder on Monday, short enough that a typo does not hold the correct address for a month. It skips a confirmed account whatever its age, and any account with a customer record behind it, matched on user_id AND on the address, because either link means somebody is a customer. Every removal is logged with the address: a line that disappears is what somebody asks about later, and a count answers nothing. The deadline is said on the page as well as in the mail. Somebody who never received the mail is looking at the page, and the deadline is the reason they do not have to do anything about an attempt they abandon. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 14:08:02 +02:00
nexxo	f49f1dca09	Say when no mail is being delivered at all ... "Ich versuche mich zu registrieren, erhalte aber keine Verify-Mail, auch nicht beim erneuten Senden." Traced rather than guessed, and the evidence is in storage/logs: the address appears three times, so the mails were built and handed to a transport that writes them to a file. MAIL_MAILER=log. MailboxTransport::resolution() short-circuits on it — NON_DELIVERING is ['log', 'array', null] — so every purpose mailer becomes the log transport however well the five mailboxes are configured, which is correct for a development machine and exactly what was happening here. The reason it deserves a notice is that the failure is silent in every direction an operator would look. Mail::queue() succeeds. No job fails. The queue empties. And the console's own mailbox test reports SUCCESS, because MailboxTester builds its own transport on purpose — a check that honoured MAIL_MAILER=log would report success while writing to a file. So every instrument on the page said fine. Now the front page says it, linked to the mail page, and the mail page says it above the mailboxes it makes decorative. All three swallowing values are named, not only 'log': array and an unset default do the same thing, and a notice that only knew about one would be silent in the two cases nobody thinks to check. Two existing tests asserted that a clean installation raises no notice, and went red — correctly, because phpunit.xml forces MAIL_MAILER=array so a suite cannot send mail. They pin a delivering mailer now: the warning is about the environment, those tests are about the estate. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 13:55:55 +02:00
nexxo	70fa136e22	Say on the front page that the site is switched off ... "Ich komme auf dem lokalen Dev-Server nicht auf www.dev." Diagnosed rather than guessed: Laravel answers 200 on that host, and the request never reaches it — site.public is false, so PublicSiteGate returns the placeholder with a 503 to every visitor who is not on the management VPN and not signed in as an operator. Which is precisely what a broken deployment looks like from outside, and the only place that said so was the switch itself, on another page. So the console says it now, on the page an operator opens when something looks wrong, and the notice links to the switch. The second half of the same report — being sent to app.… — is the missing SITE_HOST. Without it the marketing site is registered without a hostname: it answers on the PORTAL's host as well, and every route() it generates points at APP_URL, so a link on the site lands on the portal's domain. Also said, also with the host named. Only where the installation is host-separated at all, though. A fresh checkout binds nothing to a hostname by design — RestrictAdminHost: "upgrading must not lock anyone out of a system that was working" — and a warning there is furniture. My first version fired on every clean installation and two existing tests said so immediately; they were right. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 13:36:42 +02:00
nexxo	a84251260c	Read the mailbox password where it actually is, and let the console test it ... The inbox kept saying no mailbox was set up while the password sat right there on the settings page. isConfigured() read config('services.inbound_mail.password'), which is only ever the .env value: this project deliberately does not overlay stored secrets onto config at boot — SecretVault's own docblock says so, and HttpMonitoringClient reads its token at the point of use for exactly that reason. My docblock even asserted the opposite mechanism, which I never verified. It reads the vault now, and falls back to .env because SecretVault::get() already does. And a way to find out. "Verbindung prüfen" saves the form first — testing what is on screen while the server still holds the previous values would report on a mailbox nobody configured — then performs the same four verbs the real fetch performs: LOGIN, SELECT, SEARCH UNSEEN. A check that proves something easier than the actual job is worse than none. What it reports back is one of five fixed words, never the server's own prose: an IMAP error carries the command it failed on, and for LOGIN that command contains the password. Each word maps to a sentence an operator can act on — address and port, mailbox and password, the folder. The line saying when the mailbox was last reached is on both pages, and it is written by the SCHEDULED run as well as by the button. Otherwise "last checked" would mean "last time somebody pressed a button", which is the less interesting of the two: a mailbox that stopped answering at three in the morning is the one worth seeing, and nobody presses a button at three in the morning. It is also shown when the answer is "never" — an empty inbox and a mailbox that stopped answering look identical, and this line is the whole difference. A fetch against a mailbox that just refused the login now takes nothing in and records the refusal, rather than reporting "nothing new" — which was true and useless. Also: HostStepsTest asserted the literal clupilot.com for a host name. That was true until CLUPILOT_DNS_ZONE was set to clupilot.cloud on this installation, and then a correct configuration failed a test. The zone is pinned in the test now; what it is about is the shape of the name and which address it carries. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 13:12:29 +02:00
nexxo	32a8bd9a88	Refuse the sale instead of reaching Stripe without a key ... Task 5: Billing::purchase() now checks SecretVault for a stripe.secret before touching anything else — no customer, no plan lookup, no Order row — and the customer reads a plain sentence instead of a 500 page. HttpStripeClient's own secret() throws the same StripeNotConfigured exception rather than sending a request with an empty bearer token and letting Stripe's 401 stand in for the real cause. isConfigured() was fixed alongside it: it used to call secret() too, which would have turned every "is Stripe set up?" check (the checkout controller, the catalogue sync commands) into an uncaught exception the moment a key went missing — the opposite of what this task is for. It now reads the vault directly. The new guard is unconditional, including for the cart-only purchase types (storage, addon, plan changes) that never call Stripe themselves — a cart order nobody can ever pay for is pointless to create. That broke every existing Billing/Cart/Downgrade test that calls purchase() without a stored key; each affected fixture now deposits one via the new withStripeSecret() Pest helper. A few of those tests (CustomDomainAccessTest, DowngradeTest) were passing already but for the wrong reason — the new guard, not the check they were named for — since both only assert an order was NOT created; they get the same fixture fix so they still prove what they claim. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 11:58:01 +02:00
nexxo	9da1358802	Stop charging VAT to the customers who owe us none ... A verified EU business outside Austria gets reverse charge — rate 0, no VAT line, the note on the invoice — and was still charged 214,80 € for a 179,00 € package, because one Stripe Price carried the domestic gross for everybody. There is no VAT line on their document to reclaim, so it was a flat 20 % surcharge on exactly the customers who read their invoices, and the document then stated the whole 214,80 € as net at 0 %, so they self-accounted their own VAT on a base a fifth too large. A Stripe Price can ask who is buying after all: there are two per sellable thing now, the domestic gross and the bare net, both live on one Product, and the checkout picks by TaxTreatment. The rule is Austria B2B 20 %, other EU B2B without VAT — a domestic business still pays the gross, reclaims it as input tax, and the price on the website is still the price charged for them. - stripe:sync-catalogue mints and archives both halves of every pair, per plan and per module; `reverse_charge` on stripe_plan_prices/stripe_addon_prices says which is which, and joining it on subscriptions.stripe_price_id says which one a running contract is billed on. A rate change moves the gross Price and leaves the net one alone, because the net owes nothing to the rate. - A status that changes after the sale converges: a verification (or a lapse) makes stripe:reprice-subscriptions move the contract onto the other Price with PRORATE_NONE, because the term is already paid for. The module items follow the same way. - Downstream follows: the invoice total equals what was taken, the proof register expects the figure this customer is actually charged (so a correct reverse-charge sale is no longer flagged as a mismatch, and an overcharged one is), the setup fee obeys the same rule, and the booking page quotes what it will charge. - StripeClient gained activatePrice(). Archived Prices were brought back in our own table and left inactive at Stripe, so a rate that moved and moved back pointed the catalogue at a Price no checkout could be opened for. An unverified number is still charged the gross — an unchecked string must never be a discount — and where the net Price is missing the checkout refuses rather than reaching for the domestic one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 02:15:41 +02:00
nexxo	889b401faf	Fix nine defects in the provisioning pipelines ... The capacity park could not survive its own first poll. ReserveResources polls every 120 s and declared a maxDuration of 60, and RunRunner measures a step's budget from a started_at it deliberately does not reset on a poll — so every re-entry was ruled timed out before the body ran, a timeout consumes an attempt, and five of them failed a paid order in about six minutes. The fourteen-day promise, the console's capacity queue and the "go and buy a server" workflow were unreachable code. maxDuration is now the whole park plus one poll interval, and a test drives a park through the runner rather than calling execute() directly, which is why this was invisible. Every guest occ call ran as root. `docker compose exec` defaults to root and the Nextcloud image's console.php exits 1 unless the caller owns config/config.php, so all five call sites were failing on every instance. There is now one builder, App\Support\NextcloudOcc, and a test refuses a second: nothing in app/ may spell the invocation out by hand. deploy/ update.sh had learned this for our own container and nobody carried it across. RunAcceptanceChecks was terminal on the first no. certReachable() answers false for a connect timeout as readily as for a missing certificate, so one bad second ended a finished, certified Nextcloud as a failed order with the instance released. The probes retry now and the run still fails for good with the probe's own reason once the budget is spent; the two facts a retry cannot change stay terminal. The in-flight guard asked whether anything was running, not whether it would do the work. App\Provisioning\WorkInFlight asks the second question, reading the step lists the runner executes: a domain proven during a restart is routed, and a storage pack booked during an address run is delivered instead of charged monthly and forgotten. The address pipeline ran its steps in the wrong order for the direction it exists for. Nextcloud before the router in `address` and `plan-change`, as in `customer`, because a run that got the certificate and then failed left the customer's own domain serving an untrusted-domain error under a valid certificate while the portal called it live. Safe in both directions; the reasoning is written above the pipeline. A stale guest_ip could never be corrected. ConfigureDnsAndTls compared the hostnames but never the backend, and nothing re-read the address after the build. It now records and compares `routed_backend`, and ConfigureNetwork joins the `restart` pipeline — a cold boot is what moves a DHCP lease — and asks for the address to be re-applied when the guest has actually moved. Also: HetznerDnsClient::upsertRecord read only the first page of a zone that pages at 100, so past a hundred records it created a second A record for the same name and the cloud was up about half the time; the console's retry left a live customer's order in `provisioning` for ever for any maintenance pipeline; and a revived run's first pass burned an attempt on a timeout that had already happened, because the clause written for it used `??=`. Seven test sites wrote config('provisioning.plans.*'), a key that has not existed since the catalogue moved into the database. Every write was a no-op, so each test proved something other than its name: the missing template, the two snapshot regressions and the grandfathered-price scenario are now actually constructed, ValidateOrder's reasons are asserted rather than only its type, and the end-to-end run checks that the quota step delivered something. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 01:34:55 +02:00
nexxo	8ca0d4d257	Say the same thing to the customer, the register and the bank ... Five places where the product told somebody a figure that nothing behind it produced. **The invoice page showed five invoices nobody was ever issued.** A mock that outlived its purpose: CP-2026-0003 to CP-2026-0007, a prefix belonging to no configured series, all "paid", a spend curve from 179 to 198 € and a next charge of 198 € on 01.08.2026 — behind ['auth','verified','customer.active'], so every signed-in customer saw it. Their real invoices existed in `invoices`, were rendered as PDFs and mailed to them, and appeared nowhere in the portal at all. The page now lists their own documents, newest first, with the numbers, dates and totals off the frozen snapshot, a Storno marked as one, and a download. The PDF route resolves the document against the signed-in customer in the query — a URL anybody can type is not made private by not printing it. No next charge and no chart: nothing here computes what Stripe will take next cycle, and a figure nobody has worked out is worse than a blank space. **The setup fee was quoted everywhere and charged nowhere.** On the price sheet, on the booking page, set by the operator in the console — and CompanyProfile::setupFeeCents() had no reader outside the two sentences that quoted it. It is charged now, as a second non-recurring line on the same checkout session, which Stripe puts on the initial invoice only. `orders.setup_fee_cents` records how much of the charge it was, so the whole total still goes back on a withdrawal while the register holds the PACKAGE's charge against the contract price and the invoice prints the fee as a line of its own. The booking page was also quoting the fee NET under the same sentence the website quotes GROSS — 99,00 against 118,80 — and now quotes what will be taken. **An upgrade click cancelled a booked downgrade and delivered nothing.** Nothing in this application marks a cart order paid, so the customer traded a downgrade they had genuinely booked for a cart line that would never be fulfilled. The booking now stands until the upgrade actually lands on the contract, where ApplyPlanChange clears it. The fulfilment seam is reachable for every type that can be paid — a module and a storage pack book through BookAddon, which was the missing path from a paid order to a SubscriptionAddon and left AddonPrices, SyncStripeAddonItems and clupilot:end-cancelled-addons with no caller behind a payment. A paid traffic pack logs an error rather than pretending: the metered allowance is a standing count of packs while a top-up is sold for one month, and which of the two is meant is not a guess to make here. That no path to `paid` exists yet is now stated in both places rather than in one. **The proof register called correct charges wrong.** expected_gross_cents used the CUSTOMER's rate, which is zero under reverse charge, against the domestic gross Stripe actually took — so matches_catalogue was false for every EU business sale charged exactly the advertised amount, and for every renewal on a contract with a module, which was held against `price_cents` alone. It compares against TaxTreatment::chargedCents() and against the whole term now. Where no money moved, charged and the flag are null instead of the expected figure agreeing with itself, and a plan change records the terms with the pro-rata figures in the snapshot rather than money that arrives again on Stripe's proration invoice. **The seller's own VAT id was on the invoice, unlabelled**, between the register number and the court. Labelled — and the footer's composition moved out of the TCPDF method, because inside one the only way to read what it says is to render a PDF and un-subset its fonts. One test enshrined a figure the code does not produce: a reverse-charge purchase recorded with no charged amount, asserting 17900/0/17900, where OpenSubscription always passes the charged figure and a real one records 21480/0/21480. Another asserted that an upgrade click cancels a booked downgrade. Full suite: 1676 passed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 01:30:24 +02:00
nexxo	8440266ed3	Stop charging for a service that has ended ... Nothing in this application could cancel a Stripe subscription — there was no such method on the client at all. So a customer who cancelled and a consumer who withdrew both stayed subscribed, the card went on being charged every month, and every one of those payments arrived as invoice.paid, drew a real number out of the gapless Austrian series and mailed the PDF, for a machine that had been switched off. Indefinitely. StripeClient::cancelSubscription() closes the first half, with the timing passed explicitly at the call site — CANCEL_AT_PERIOD_END for a cancellation, because the customer keeps the term they paid for, and CANCEL_IMMEDIATELY for a withdrawal, because that unwinds the contract and the whole amount has just gone back. The immediate form states prorate and invoice_now as false rather than inheriting them: a credit note of Stripe's beside our own Storno would be the same money twice. The second half is ApplyStripeBillingEvent::owesADocument(). Refusing every invoice on a cancelled contract would lose the legitimate final one — the cycle for a term the customer really did use, unpaid, dunned for three weeks and settled after the contract ended. So the question is not when the payment landed but what it is for: an invoice whose billed period STARTED before the contract ended is documented, one whose period begins at or after that moment is not. Neither is a contract marked cancelled with no date, nor an invoice with no period, because a number handed out in error can never be withdrawn while a missing document can still be issued. The register entry is written either way — the money moved, and that is where an operator finds what has to go back. A cancellation also took its date from the order date plus MONTHS, whatever the term said, so a yearly customer who cancelled in March lost the nine months they had already paid for. It reads current_period_end now, which Stripe keeps current for both terms; the month-walk survives only for a machine with no contract behind it, where nothing records a term at all. Stripe is asked first and our rows are written only if it agreed: a cancellation we could not make effective is the defect above wearing a "gekündigt" label on the settings page, and a cancellation has no deadline, so being asked to try again costs nobody anything. A withdrawal cancelled the OPENING invoice only, found by invoices.order_id — which a renewal and a module document leave null on purpose. A storage pack booked on day three and withdrawn from on day ten was therefore neither cancelled nor refunded. Every charge inside the window is covered now, one Storno per document and one refund per payment, each against the payment that actually took it: a single refund of the total against the opening PaymentIntent is what Stripe would have refused for exceeding it, and one idempotency key for the whole withdrawal would have had Stripe replay the first refund's answer for the second. StartCustomerProvisioning::resume() opened a missing contract and returned, and the only production call to IssueInvoice::forOrders() is after the order commits — so a worker killed in between cost that customer their invoice for good, silently, with nothing anywhere sweeping for it. resume() finishes that work too, guarded by the invoice already filed against the order and by invoices.sent_at, so however often Stripe redelivers it comes out as one invoice, one number, one mail. The order confirmation stays on the first pass alone: it has nothing to stamp. subscriptions.cancel_requested_at is new because the billing half of the application had no way to tell a cancelled contract from an untouched one. Deliberately not a status: until the term runs out this is a paying customer, which is the distinction EndInstanceService is built around, and `cancelled_at` beside it still means the day it genuinely ended. clupilot:verify-vat-ids is scheduled monthly on the first, and its docblock no longer points at a note in routes/console.php that never existed. Reverse charge rested on a one-off VIES answer, a withdrawn registration keeps earning rate 0 for ever, and the unpaid VAT on those invoices is the seller's — so the cadence is the width of that window, and the first of the month is the rhythm the return is filed on. Two tests that proved nothing are now about behaviour. SettingsTest asserted service_ends_at was not null, a column the code had just written and which the broken monthly arithmetic satisfied exactly as well as the right answer; it states the yearly date, the contract's own record and the order to Stripe. EndInstanceServiceTest travelled to whatever value the implementation had computed, so it recomputed the code instead of checking it, and never looked at billing at all; the boundary is a literal date now and the money stopping is asserted beside the address coming down. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-30 00:52:19 +02:00
nexxo	518bc9aa41	Put the open tab in the address bar, including the first one ... Reported as "die Tabs fehlen in der Query beim Kunden". The binding was there and identical to the settings page — checked in the rendered snapshot, which is where Livewire's JS reads it from — but `except` hid the parameter while the DEFAULT tab was open. So arriving on a customer showed no ?tab= at all, and a link to the page could not say which tab it meant unless the tab happened not to be the first one. From the address bar that is indistinguishable from the feature not existing. No `except` now, on all three tabbed pages: the parameter is there from the first render. And `history: true`, so each tab is a step the back button can take rather than a silent replaceState — which also makes the change unmistakable while clicking. Asserted against the rendered page rather than the component, because the parameter is written client-side from the `url` memo in the snapshot: the memo IS the behaviour, and asserting the property would have passed throughout the bug. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 23:46:13 +02:00
nexxo	f00cbf18d3	Let an operator correct a customer's details ... The console could show them and not touch them, so a moved office or a new contact person meant impersonating the customer or editing the database by hand. Both are worse than a form. R20: a modal, opened from the Stammdaten tab, authorising again and reading the record itself rather than trusting anything the browser hydrated. Most of the work is in what saving must NOT quietly do. The customer type is never reset to "nobody asked". The field opens on "leave unchanged" precisely so that saving an address correction cannot undo it — that answer decides whether a withdrawal right exists, and losing it silently would be the expensive kind of quiet. A changed VAT number is unverified from the moment it is stored — the verification is bound to the value, so that happens by itself — but `vat_id_verified_value` is left alone: it is the record of what WAS checked, and clearing it would destroy the evidence rather than the claim. The address is also the sign-in address and the key inbound mail is matched by, so changing it moves the linked portal login in the same transaction and puts it back to unverified, which is what Laravel's own profile update does for the same reason: nobody has shown they can read the new address. No mail is sent from here — the portal asks for the confirmation at the next sign-in, and a mail an operator did not knowingly send is a surprise. Three addresses are refused: one belonging to an operator (R21 — no index spans the two tables, so it is checked), one belonging to another customer, and one belonging to somebody else's user row, which can outlive or predate a matching customer. Not offered here, each for its own reason: `status`, because suspending has consequences for access and a lifecycle switch hidden among address fields is one somebody flips by accident; `stripe_customer_id`, because a wrong one does not move a contract, it points our records at somebody else's payments; the brand fields, because the customer sets those for themselves and an operator overwriting a logo is not a correction. There is a test that fails if any of them appears — with the comments stripped first, since the class documents at length why they are absent and that documentation is not the offence. This repository has fallen into that trap three times. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 23:18:46 +02:00
nexxo	57c6912987	Say that a click landed, and make moving one actually move it ... "Man klickt und sieht nicht was passiert." Every action in this console is a round trip, and a round trip with no sign of itself reads as a click that missed — so the answer is in three places, from the general to the specific. A thin bar at the top of the window for any Livewire request, in app.js. Delayed by 140 ms, because a request that answers faster than that is perceived as immediate and a bar flashing on every keystroke of a .live field is worse than none. It creeps to 70 % and only completes on the answer: a bar that reaches the end while the answer is still on its way is a lie about the thing it exists to report. Released on failure as well — the request somebody must not be left waiting on is precisely the one that went wrong — and on wire:navigate, which is not a request hook at all and would otherwise leave the bar behind on a page that is gone. Per button: a pressed state on the way down, disabled while its own request is out, scoped with wire:target to that button's own call so a row does not grey itself out because a neighbour is moving. The edit button carries its own spinner, because opening the modal is a request made by the MODAL component — wire:loading on this page never sees it. It clears when the package announces the modal is up, and on a six second timer as well, so a request that never answers cannot leave a row spinning for ever. And the reordering was not only slow to look at, it was wrong. It added or subtracted a fixed amount: with the seeded values ten apart that usually landed right, and sometimes landed on a value another template already had — or on the floor along with three others. Equal sort values fall back to the name, so a click could reorder something else, or nothing, which is indistinguishable from a click that never registered. It swaps with the neighbour now: exactly one place, or nothing at the ends, both of which are what an operator expects to see. Where two shared a value the swap leaves them distinct, or the next click would do nothing again. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 23:06:30 +02:00
nexxo	2277dfe4cb	Ask the EU register whether a VAT number is real ... vat_id_verified_at was declared on the customer and read by TaxTreatment, and set by no code anywhere. hasVerifiedVatId() therefore never returned true, so reverse charge could not trigger for anybody - and every EU business customer was invoiced Austrian VAT they cannot reclaim in their own country, which is not a pass-through for them but a real cost until the invoice is corrected. The check has THREE outcomes, and the third is why VatIdCheck exists. VIES is a gateway onto twenty-seven national registers and any of them is regularly down. Reading "I could not ask" as "not registered" would clear a verification that has stood for months, move that customer onto the domestic rate, and change what their next invoice says - because a register was asleep. Reading it as "registered" would put reverse charge on an unchecked number, which is our liability. So on UNAVAILABLE nothing at all is written. Asked at the moment the number is entered, because that is when somebody is looking at the field and can fix a typo. The save has already happened by then and the check cannot undo it: a register that is down must not cost a customer their address change. Shape and membership are refused before a request is spent, and the fake refuses on the same rule as the real verifier. A fake that answers where VIES would never have been asked is not a simplification but a different product, and free text normalises into a well-formed number more easily than it looks - "not a number" becomes NOTANUMBER, which the shape rule alone reads as a Norwegian one. clupilot:verify-vat-ids re-asks about the numbers reverse charge rests on, since a registration can be withdrawn. Deliberately not scheduled: it queries a public service with a concurrency limit on behalf of somebody else's tax position, and the cadence is the owner's to set. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 22:42:29 +02:00
nexxo	f02e86769b	Charge the price the website shows, and hand a withdrawal back in full ... Stripe was charging the catalogue's NET figure while the document added the domestic rate on top: a customer quoted 214,80 paid 179,00 and was then invoiced for VAT nobody had collected. Under para 11(12) UStG that VAT is owed to the tax office whether or not it ever arrived, so every document issued created a liability against revenue that did not contain it. The Stripe Price now carries the GROSS figure. price_cents stays net - it is frozen onto every contract and PlanChange prorates against it, so redefining it would corrupt every pro-rata sum ever computed. Only the amount at the till moved, and it is formed by the one call TaxTreatment already answers for the price sheet and for the invoice, so displayed, charged and invoiced cannot drift apart. Stripe's automatic_tax is deliberately not used. TaxTreatment is the single tax authority here, and a second rate computed by Stripe would take 19 % from a German consumer while our document said 20 %. A Stripe Price cannot be edited, so a changed figure means a new Price and the old one archived - which stops it being SOLD and leaves every subscription already on it billing the old amount for ever. stripe:reprice-subscriptions is the second half, and a command of its own because it touches live money. A withdrawing consumer is refunded in full, as the owner decided. That is more generous than FAGG para 16 requires, and it makes the express-request consent the statute hinges on irrelevant - so the gate is gone rather than left looking load-bearing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 22:42:02 +02:00
nexxo	33566cd404	Show the customer, and write the answers once ... Two complaints, one cause: the customer page was a compose box with three lists under it. It showed nothing ABOUT the customer, and every answer was typed from scratch. The page is five tabs now. Stammdaten — contact, phone, since when, language, and the tax standing: consumer or business, with "nobody asked" saying so rather than passing for business, because that answer decides whether a withdrawal right exists at all. Paket — the contract's own FROZEN figures, the modules at the price they were booked at, and the machine: address, state, host, datacenter. Zahlungen — invoices with net, gross and their PDF, and the orders beside them, because an order is a purchase and an invoice is a document about one. Nachrichten — the portal requests in the customer's own words, the mail they sent, the mail we sent. Schreiben — last, because it is what you do after reading. The tab is in the query string, like Settings and Integrations: a reload, a bookmark and the back button all land where the operator was, and a link can point at the tab that matters. And templates, under Betrieb → E-Mail-Vorlagen. Most customer questions are the same five questions, and typing the answer again every time is how two customers get told two different things about one subject. A template is INSERTED into the compose field with the customer's own details filled in — never sent as it stands, because the last two sentences always belong to the person asking. What goes out is what the operator saw and edited. Three decisions worth naming. {{contact}} takes the contact person where one is on record and the company name otherwise, because "Guten Tag Beispiel GmbH" is the line that gives away a mail written by a database. {{amount}} is the gross figure — what the price sheet quoted them and what their bank statement says. And a typo comes out as {{kunde}}, standing there in the field where the operator sees it, rather than as an empty string that produces "Guten Tag ,". A placeholder with no value for this customer stays empty; nothing is invented. Placeholders are named in English because they are identifiers, not prose: a template has to survive somebody switching the console's language. The list the page documents is the renderer's own, so a token added in one place appears in the other without being written down twice. Blade's echo tag ends at the first }} it finds, which turned a literal placeholder in the documentation into compiled nonsense. Assembled in PHP now, and caught by the test that renders the page rather than by somebody opening it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 22:37:30 +02:00
nexxo	e376b571be	Read the support mailbox into the console ... No, not an API token: mailcow's API administers domains and mailboxes — it does not read mail. Reading a mailbox is IMAP whoever runs the server, so that is what this is. Host, user and folder are console settings; the password is a vault entry, like every other credential that opens something. IMAP by hand rather than a dependency. Four verbs are needed — LOGIN, SELECT, SEARCH UNSEEN, FETCH — and the parsing that follows is the real work either way. It is bounded by what the console shows: a sender, a subject, the words a person wrote, and the NAMES of anything attached. Real mail from real people arrives encoded, so it handles RFC 2047 subjects (every German subject with an umlaut in it), quoted-printable and base64 bodies, Windows charsets, and multipart — text wins over HTML, because a console is not a mail client and the words are in the text part. A message it cannot make sense of is skipped and logged, never guessed at: a garbled question in front of an operator is worse than one they go and read in the mailbox, where it still is. ATTACHMENTS ARE NOT STORED. Only their names and sizes, so an operator knows something was attached and can go and look if it matters. Keeping whatever a stranger chooses to send would make this application a malware store with a web interface in front of it. Whose a mail is, is decided by the sender's ADDRESS and by nothing else — not by a name in the subject, not by anything in the body. A mail is easy to write and this decision attaches a stranger's words to a real customer's file; there is a test that forges the name and the subject and still gets nothing. An address nobody recognises stays unassigned, shown FIRST and never hidden: that is a new enquiry, or a customer writing from their private account, and it is the mail that must not be missed. An operator can place it by hand from the same row. Nothing is deleted on the mail server, ever. Messages are flagged seen once the row is safely written — and only then, because flagging first and failing after would lose the message with no second copy anywhere. Filing one away is this console's own state; the mailbox is untouched. Two fixes on the way past: the customer page printed "customers.status.active" and "support.status.open" — a lang key with no file behind it renders as itself and Laravel says nothing — and the same page is now covered by a test proving each list is scoped to the customer in the URL, which was reported as "unterhalb steht immer das selbe". Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 21:41:29 +02:00
nexxo	6d7c2bdf35	Ask whether they are a consumer, and let one change their mind ... Three things the product owed its customers and did not have. **Who is on the other side.** There was no consumer/business flag anywhere, and `vat_id` was standing in for one — which it cannot: a business without a VAT number is an ordinary small business, and a consumer with one does not exist. It is asked at sign-up now, correctable in the portal, and NULL where nobody has been asked. Unknown is read as CONSUMER everywhere it decides a right, because that mistake costs us a refund while the other one takes a statutory right away from somebody who has it. Reverse charge asks the recorded type instead of the number: an explicit consumer is charged the domestic rate whatever `vat_id` says — previously they were not, and anyone could zero their own VAT by getting a number verified. An unrecorded type still falls back to the verified number, so no contract that is already running changes rate. **The fourteen-day right of withdrawal** (FAGG, §312g BGB), for consumers only, at every door: the window is stamped on the contract when it is concluded, the customer exercises it from the portal, an operator records one that arrived by telephone or post, and both go through one action that refuses a business customer on the server rather than by hiding a card. The money follows the paperwork rather than being computed beside it. The invoice is cancelled by a Storno with its own gapless number — nothing is ever edited or deleted — a new invoice states the pro-rata value of the service actually delivered (FAGG §16, by days over the term paid for), and the refund is exactly the difference between the two documents. Where the consumer never expressly asked for the service to begin at once, they owe nothing and the whole amount goes back. `StripeClient::refund()` is new, keyed so a retry cannot send the money twice. The service ends through EndInstanceService and the `cancellation_scheduled` machinery that was already there. **The cancel button for modules.** BookAddon::cancelAtPeriodEnd() had no caller in the interface at all, so a customer could book a recurring charge in two clicks and had no way to stop it. It is on the module card now, with the date it runs until and a way back while the cancellation is still pending — and putting a module back settles nothing, because the term it was cancelled for was paid for in advance. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 21:06:06 +02:00
nexxo	0e25fe88d4	Keep a register of what was sent, and answer the customer from here ... Three complaints, one shape: the console knew things and could not act on them, so the work happened somewhere else and left no trace. The header said "4 Hinweis(e)" and led nowhere. Whoever read it had to know that the list was a card further down the same page, and then go looking for the host or the failed run by hand. The count is a link now, every notice carries the page that shows the thing it is about, and the plural is a word rather than a bracket. Nothing recorded what this installation had sent. "Hat der Kunde die Zugangsdaten je bekommen, und wann?" was answered on the mail server — a different machine, a different program, and nothing an operator can put in front of somebody who says nothing ever arrived. Every mail now writes a row: when, to whom, which mailable, and the customer it belongs to. Written from MessageSent, so a row means the transport accepted it; that is the strongest thing an application can honestly claim, and a column called "delivered" would be pretending otherwise. Verification and reset mails are left out on purpose — they go to unconfirmed addresses and anybody who can type into a form can send them, so recording them would hand the register to whoever wants to fill it. And the customer list was the end of the road. There is a page behind it now: what they bought, what they asked in their own words, what we sent them, and a box to write the next message. It goes out from the support mailbox and is recorded on the way — with its body, because an operator typed it and "what exactly did I write to them in March" is a question the mail server's log cannot answer either. Answering a request from here closes it, which is the reason to answer from here at all: answering from a mail client leaves it open for ever, because nothing tells it otherwise. Found on the way, by a test that sent a real mail rather than asserting it was queued: resources/views/mail/reset-password.blade.php was missing its closing </x-mail.layout>. The component's contents were never terminated, the layout's own @if ran off the end of the file, and the mail raised a Blade syntax error instead of rendering. Password reset has therefore never delivered a link since it was built. Closed, plus a test that renders it and one that counts opening against closing tags across every mail view. Reading INCOMING mail in the console is not in this: it needs the mailbox polled over IMAP, which is a credential and a dependency. Requests filed through the portal appear here in full; a customer who writes by mail instead still has to be read in the mail client. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 21:02:36 +02:00