The failure may be a lost response to a request that did create the record.
Advancing straight away stored no id, so PurgeHost could never remove it and the
host's management address stayed published. The upsert is idempotent, so a retry
recovers the id; only after the attempts run out does the onboarding continue
without a name.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two legacy codes can normalise to the same label (eu_west and eu-west), and
separate counters then handed both of them eu-west-01 — a unique-constraint
failure inside the reservation, which blocks onboarding rather than being a DNS
problem the step can shrug off. Lock, counter and the in-use check all key off
the label now.
(The helper was also called label(), which HostStep already declares as the
step's display name — renamed.)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
alpha_dash accepted eu_west, -edge and edge-, none of which are valid DNS
labels — every host in such a datacenter would have failed registration and,
because DNS is non-fatal, silently ended up without a name. The console now
requires a proper label, and the step normalises anything created before that
rule so existing rows still get a usable name.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Codex was right that my never-reuse claim did not hold:
- The lock was released with only a candidate in hand, so two concurrent
onboardings in one datacenter could pick the same name and overwrite each
other's record. The name is now persisted on the host while still locked.
- The number was derived from the hosts that happen to exist, so removing the
highest one handed that number straight back out — a cached name would then
resolve to a different machine. The counter is stored per datacenter, floored
by what is actually in use so a wiped settings store cannot reissue live names.
- PurgeHost deleted the row that carried the record id, leaving the machine's
management address published with nothing left to clean it up.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
fsn-01.node.clupilot.com, numbered per datacenter and never reused — removing a
host must not renumber its neighbours onto its name, so the number is stored
rather than derived.
The record points at the host's WireGuard address, not its public IP: the name
exists so an operator can reach a host by name over the VPN, and publishing a
Proxmox host's public address would hand every scanner a target, which is the
one thing this network design avoids.
DNS is convenience, not a prerequisite: a failure logs an event and lets the
onboarding finish rather than stranding a host that is otherwise ready.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureWireguard and RemoveWireguardPeer mutate the hub too, and were not
taking the lock, so a sync could still read the interface around them and
write stale state. Both now hold wireguard:hub, which is what makes the
read/mutation guarantee actually hold.
- The duplicate-key check ran before the allocation lock, so two concurrent
creations with the same key both passed it and the loser hit the unique index
as an unhandled 500. The check moved inside the lock, with the index kept as
a caught backstop for any writer that does not take it — reproduced in a test
by inserting a colliding row from within the allocation call.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- MONITORING_ATTEMPTS is capped by the run's max_attempts, so a large value can
no longer burn the retry budget and fail the very provisioning the degradation
exists to protect (covered by a new test at the budget boundary)
- /health is now dependency-free (200 in ~2ms with Kuma absent, verified: the
container healthcheck stays healthy); Kuma state is exclusively in /ready
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- attempt is 0-based, so compare one-based: ATTEMPTS=2 really means two tries
- bridge accepts add_monitor returning {monitorID}|{id}|int (v1.2.1 returns a
dict — re-verified: first create on a fresh Kuma is HTTP 200 with the id)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Kuma has no write REST API (monitor CRUD is Socket.IO only), so docker/kuma-bridge
translates the exact generic REST contract HttpMonitoringClient already speaks —
no PHP client change needed. Opt-in compose profile 'monitoring'.
Verified end-to-end against a real Uptime Kuma 1.x:
create -> id, create again -> same id (idempotent), list, status, delete
and PHP MonitoringClient -> bridge -> Kuma round-trip.
The e2e run caught a real bug: add_monitor takes 'maxretries', not 'retries'.
Monitoring is now observability, not a delivery gate:
- RegisterMonitoring retries MONITORING_ATTEMPTS times on an outage, then
continues degraded with a visible 'info' event
- RunAcceptanceChecks no longer fails when monitoring isn't green (a fresh Kuma
monitor legitimately reports 'pending' — confirmed in the e2e run); it records
the gap instead. MONITORING_REQUIRED=true restores strict gating.
- docs/monitoring-uptime-kuma.md documents setup, failure behaviour, alternatives
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clone recovery: once the lock clears but the task ref is lost, destroy the
possibly-incomplete VM and re-clone instead of advancing onto it.
- applyFirewall clears existing rules before adding, so retries don't accumulate
duplicate Proxmox firewall entries.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Nextcloud: parse occ status JSON (installed + not in maintenance).
- Admin: query occ user:info for the account.
- Monitoring: MonitoringClient::isHealthy checks the provider, not the local row.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TraefikWriter now targets the host that serves the traffic (DNS points at it):
SshTraefikWriter SSHes in and writes the file-provider YAML there. Interface
takes the traffic host + guest backend.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CompleteProvisioning scrubs admin_password whenever credentials_sent exists,
so a crash between recording and scrubbing can't leave the password in context.
- HttpMonitoringClient looks up an existing monitor by URL before creating one,
so a retry after a crashed POST doesn't create a duplicate external monitor.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clone recovery polls until the VM lock clears instead of advancing onto a
possibly-incomplete clone.
- RegisterBackup/RegisterMonitoring create the local row BEFORE the run-resource
breadcrumb, so a crash between them can't leave the row permanently missing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureCloudInit sets cores/memory from the plan (not the template default).
- RegisterBackup uses a deterministic Proxmox job id (ignore-exists) + firstOrCreate.
- RegisterMonitoring is idempotent by URL + firstOrCreate — no duplicate schedules
or monitors after a crash/retry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- applyFirewall sets policy_in=DROP so only 80/443 are exposed.
- Capacity/placement account for disk_gb (the real VM allocation), not the
smaller Nextcloud user quota — no systematic overcommit.
- CloudReady sent synchronously again; the step retries on mail failure with the
password preserved (no lost credential in a failed queue job).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CloudReady receives the ENCRYPTED password (decrypts only when rendering), so
the queued payload never holds plaintext.
- RegisterBackup uses a valid Proxmox calendar expression (02:00).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CreateCustomerAdmin puts OC_PASS on the docker invocation (survives the &&).
- RegisterBackup creates a real vzdump job via ProxmoxClient::createBackupJob.
- RegisterMonitoring registers via a new MonitoringClient service (interface +
fake + http). Both persist the external id [E] before the breadcrumb, so
acceptance reflects a real registration, not a fabricated row.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clone: recover via vmExists() when the task ref was lost, instead of
re-cloning the reserved vmid (which Proxmox rejects).
- Deploy: persist the DB password ENCRYPTED before compose up and reuse it on
retry, so a crash can't regenerate a mismatching credential.
- Complete: gate credential delivery on a credentials_sent breadcrumb so a
retry after a crash doesn't re-send the email.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Failed run releases the instance (status=failed) so its quota stops counting
against host capacity.
- CompleteProvisioning activates instance+order only AFTER onboarding tasks +
credential delivery succeed.
- ConfigureNetwork polls until the guest has an address (no wrong Traefik route).
- customers.email unique + race-safe customer resolution in the intake action.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
RunRunner::onPoll no longer resets started_at, so a poll step's own deadline
(WaitForGuestAgent 270s, ConfigureDnsAndTls cert 840s) actually fires instead
of resetting every poll. maxDuration raised above each own-deadline so the
step's fail wins over the generic timeout. Shared core fix (A + B).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Require a real customer email (no unknown@ fallback merging customers).
- Stripe signature: enforce 5-min replay tolerance + accept any rotating v1.
- DeployApplicationStack no longer persists the DB password in the run context.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Stripe webhook fails closed when the signing secret is missing (outside local/testing).
- ReserveResources places + creates the instance under a per-datacenter lock so
concurrent orders can't overcommit a host.
- CloneVirtualMachine reserves the vmid + breadcrumb BEFORE cloning, so a crash
can't mint a new vmid and orphan the first clone.
- CreateCustomerAdmin checks user existence and resets the password instead of
re-running user:add on retry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Stripe: only checkout.session.completed with payment_status=paid (dedupes the
paired payment_intent event and blocks unpaid async sessions).
- Capture the guest IP (ConfigureNetwork) and point Traefik at the VM, not the
Proxmox host, so ACME/HTTP-01 can reach Nextcloud.
- Resize the disk to an absolute target (not '+…') so a retry can't double it.
(Codex #4 timeout was a false positive — started_at resets per step.)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Keeps the wg_peer resource gated on a verified handshake (idempotency) while
ensuring PurgeHost can always remove the hub peer, even on terminal failure.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureWireguard checks setup command results and only records the wg_peer
resource after the handshake verifies, so a transient setup failure re-runs
the full setup instead of getting stuck on the idempotent path.
- Host removal now deactivates immediately and queues PurgeHost, which deletes
runs under the runner lock (waiting out a long step) — no 15s LockTimeout error.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Removing a host now removes its WireGuard hub peer so a freed wg_ip can't
route to the removed server via a stale peer.
- RebootIntoPveKernel clears reboot_issued/deadline when it times out, so the
manual retry action actually re-issues a reboot instead of failing instantly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
hub_ip is now defined in config (default: subnet .1), so a custom
CLUPILOT_WG_SUBNET no longer pings the wrong handshake target.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- RunRunner returns early for a waiting run whose next_attempt_at is in the
future, so stale/duplicate jobs can't bypass backoff.
- RegisterCapacity takes the largest VM-capable datastore instead of summing
overlapping pools (local + local-lvm), preventing placement overcommit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- StepResult::poll — polling steps (reboot) wait without consuming the retry
budget; the step owns its deadline. Reboot maxDuration > deadline.
- Failed runs move a Host subject to 'error' via ProvisioningSubject hook
(no host stuck 'onboarding').
- ConfigureWireguard allocates + reserves the wg_ip under a global lock;
unique index on hosts.wg_ip as a backstop against duplicate addresses.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CreateAutomationToken now bootstraps the pveum role/user/token over the
authenticated SSH session (a fresh host has no API token yet); ProxmoxClient
is read-only in A.
- ConfigureWireguard re-verifies the handshake on the idempotent replay path,
never advancing over a dead tunnel.
- PhpseclibRemoteShell treats a missing SSH exit status as failure (255).
- connectWithKey verifies the pinned host key fingerprint on later logins.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
nexxo