15 Commits (da76a260fbaefdc388dec4376686ff04d7ad9f89)

Author	SHA1	Message	Date
nexxo	b85df4c141	Rebuild the status page as a status page ... Asked for after looking at how real ones are built. The shape they all share is a convention, and a convention is what lets somebody find the answer without being taught the page: banner, components each with ninety days of uptime, then the written record underneath. This page had only the banner — the version that is of no use the morning after, because "Alle Dienste in Betrieb" is true and says nothing to somebody who was locked out the evening before. Three things are new. The ninety-day bar. It cannot be reconstructed after the fact: the monitoring table holds the last verdict per instance, not a history. So a sampler (clupilot:sample-status, every five minutes beside the monitoring sync) writes counts into one row per component per day, and the page divides them. A day with no row is drawn as a gap and says "nicht aufgezeichnet" — never green. Degraded samples count as reachable in the percentage but still colour the day: folding them into downtime reports a slow morning as an outage, ignoring them loses the only trace of it. The incident record. An operator reports a disruption in the console, posts updates as it develops, and the entry that says "behoben" is the same action that closes it — two separate steps is how a page ends up with a resolved note under an incident that still reports as ongoing. There is deliberately no way to edit an update: it is a statement made at a time, corrections are a further entry. An open incident may make a component look worse than the probes found it, never better. Scheduled maintenance, from the windows the console already keeps rather than a second list somebody has to remember to fill in. The measurement moved out of the controller into ServiceHealth, shared with the sampler, so the banner and the bars cannot disagree about what "healthy" means. The page now uses the shared design system and the site's header and footer. Its self-contained stylesheet was there to survive a broken asset build; it does not survive one — if the stylesheet cannot be served the application serving this page is already failing, and mid-deployment every route answers with the maintenance page. What the exemption bought was a third design nobody maintained. Found while building: durationMinutes had its operands the wrong way round, and diffInMinutes is signed, so the public page printed "Dauer -86 Minuten". Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 12:45:18 +02:00
nexxo	86bf4f26e0	List issued invoices in the console, with no way to change one ... Read-only by design, and the absence is the feature: an issued invoice is corrected by cancelling it and issuing another, which is the only lawful way to correct one. There is no edit button here whose absence needs explaining, and a test asserts there is none. The PDF is a plain route rather than a Livewire action. A download is a download, and routing one through a component round-trip only adds a way for it to fail. Two findings on the way, and both were mine. The year filter used YEAR() in raw SQL, which is MySQL's. SQLite has no such function, so the page worked against the real database and threw against the test one — a query that only runs on one engine makes the test database a different product from the one being shipped. The years are derived in PHP now. And a test put a User on the operator guard, where EnsureAdmin calls isActive() on it and a 403 becomes a 500. Not a code defect: actingAs() calls Auth::shouldUse(), so a second actingAs() in the same test with no guard named lands on whichever guard the FIRST one named. That trap is written up in CLAUDE.md, I quoted it earlier today, and I walked into it anyway. The tests are split now and both name their guard. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:21:15 +02:00
nexxo	3fadaa14b0	Merge credentials and infrastructure into one Integrations page ... Zugangsdaten and Infrastruktur split the same subject by storage mechanism — SecretVault vs App\Support\Settings — instead of by what each field configures, which is not a distinction an operator setting up Stripe or DNS should have to know or care about. One page now, grouped by integration: Zahlungen (Stripe), DNS (Hetzner), Monitoring, VPN/WireGuard, SSH-Identität. A secret and a plain setting sit side by side within a section; the difference stays visible — a vault entry is write-only and shows only an outline, a setting shows its value in full — as a property of the field, not a reason for a separate page. Both storage mechanisms are unchanged underneath: this is a presentation change, not a data migration. The vault keeps its own gate (secrets.manage + a recently confirmed password); plain settings keep theirs (hosts.manage alone). Reachable with either capability, since the two are no longer two pages a role happens to see one, both, or neither of — every section and every save action still checks its own capability server-side. admin.secrets and admin.infrastructure redirect here permanently rather than 404ing a bookmark. The nav entry that replaces both is visible to either capability — Navigation's capability field now accepts an array meaning "any of these", not only a single ability. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:49:39 +02:00
nexxo	e6d2e6dc33	Give the console a Finance tab: company details, VAT rate, invoice series ... Its own tab rather than a section of Settings, as asked. What is set here appears on a legal document, and burying it beside the site-visibility switch invites somebody to change one in passing. Everything the printed invoice needs — registered name, address, Firmenbuch number and court, VAT ID, bank details, payment terms, logo — with the logo replaceable, because a company changes its mark. None of it reaches an invoice that already exists: the values are copied into each document when its number is assigned, so a corrected address is correct from the next one onwards and cannot rewrite an old one. The console refuses to consider itself ready while a name, an address or a VAT number is missing, and says which. An invoice without them is not a valid invoice in Austria, and issuing one is worse than refusing to. The series editor carries the same shape as EditDatacenter and for the same reason. The prefix is free while the series is empty and frozen once a document carries it: changing RE to AR renames nothing and leaves a series whose past says RE and whose future says AR, with no record they belong together. The counter may be raised — an operator migrating from another system needs exactly that — but never lowered, because a lower number is one already printed on a document somebody holds. Both rules are recomputed from the database on save rather than read back from the properties the browser returns. CompanyProfile drops keys that are not part of the profile. It is fed from a form, and a forged key must not be able to write an arbitrary setting into the same table the site-visibility switch lives in. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:18:43 +02:00
nexxo	864126ec7f	Add the SSH identity to the vault, and give deployment config a console page ... The SSH private key CluPilot deploys to every host is now stored through SecretVault (ssh.private_key), preferred over CLUPILOT_SSH_PRIVATE_KEY(_PATH) at all three real consumers — SshTraefikWriter and HostStep::keyLogin. kuma.password/kuma.totp stay in .env: they authenticate a separate Python container at boot, and nothing in this app reads them, so the vault would have nothing to wire them to. A new /admin/infrastructure page, backed by App\Support\ProvisioningSettings, makes the non-secret deployment settings that used to force a shell — DNS zone, WireGuard hub endpoint and public key, Traefik's dynamic-config path, the SSH public key, and the monitoring bridge URL — visible and editable from the console, each wired to every real consumer. WG subnet/hub IP and Kuma's own connection details stay in .env: the compose file and a separate container read those before this application ever does.	2026-07-29 00:52:44 +02:00
nexxo	07634c8a1d	Answer a check at once, start an update at once, and count down to neither ... Checking for updates was a request written into the same mailbox as a real update, collected by the same agent on the same systemd timer — so asking what was new was answered on the next tick, and the console, having nothing else to show, counted down to it. An operator who asked a question was told an update would start in 3:44. A systemd path unit now wakes the agent the moment the request file is written, for a check and for a run alike. PathChanged, not PathExists: PathExists re-arms as soon as the service goes inactive, so a request the agent could not consume — it holds a lock for the length of an update — would restart it in a tight loop. The timer stays as the fallback, and a drop-in disables systemd's start rate limit, because two triggers on one oneshot service can otherwise wedge the unit and leave neither of them able to run. The countdown is gone from both the settings card and the maintenance overlay. It could not be made honest: its target was recomputed on every poll, and where the interval the agent reports is shorter than the timer actually installed on that host it had already gone by, so the fallback moved it forward again each time. It ran backwards four seconds and snapped back to a full minute, forever — reported exactly that way. A queued run says it is starting; a queued check says nothing beyond its badge, because a check starts nothing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 22:25:07 +02:00
nexxo	f05547921d	Separate checking for updates from applying them, and show live progress	2026-07-28 20:23:06 +02:00
nexxo	c2681f2801	Show a full-screen overlay on every console page while an update runs ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 18:50:45 +02:00
nexxo	27292237c3	Move operator two-factor enrolment off admin.settings onto its own page ... RequireOperatorTwoFactor exempted the whole of admin.settings while compulsory two-factor was on, on the theory that it was "the page where two-factor is set up". That component also carries staff management, site visibility, network restrictions, account changes, and the two-factor policy switch itself, so an unenrolled operator got unrestricted access to all of that, not just enrolment. Enrolment (secret, QR, confirm, recovery codes, regenerate, disable) moves to its own route and component, admin.two-factor-setup / Admin\TwoFactorSetup, reachable by every operator regardless of capability. That is now the only page the middleware exempts besides logout, and its redirect points there instead. admin.settings goes back behind the policy like every other console page; only the policy switch itself stays there, since only someone who already satisfies it should be the one changing it.	2026-07-28 15:11:20 +02:00
nexxo	2b2bb439a5	Stop the console logout from destroying a shared portal session ... Where the console and the portal share a host (shared/fallback mode — this VM's own mode), both guards keep their login key in the SAME session. session()->invalidate() is flush() + migrate(true) — it discards every attribute in the session, not only the operator's, so signing out of the console silently signed a customer out of the portal too if the same browser carried both. Replaced with session()->regenerate(): a new session id, so there is no fixation risk, while attributes belonging to any other guard survive untouched.	2026-07-28 13:58:42 +02:00
nexxo	3f318c3f6a	Give the console a front door of its own	2026-07-28 11:45:22 +02:00
nexxo	4211f3dfab	Give the mailboxes a page, and the support sender its own capability	2026-07-28 01:57:11 +02:00
nexxo	9b8d5dfd1e	Editing in modals, an update button that is not gated on a stale reading, and a support page that is real ... Three things reported together. ── Editing belongs in a modal (R20) The seats table grew its input fields into the row. It worked and it looked broken: the row grew, the columns beside it jumped, and a table half in edit mode reads as a rendering fault rather than as a form. The project already had the answer — EditDatacenter, whose own header comment says it avoids exactly that row-height jump — and the seats table simply did not use it. EditSeat is now a ModalComponent. A modal is reachable WITHOUT the page's route middleware, so it resolves the customer itself and re-reads the record rather than trusting a hydrated property: a forged addressEditable would otherwise open the address of an accepted seat, and the address is the person — editing it hands one employee's access to another with nobody told. Only an invitation still in flight can have its address corrected, which is the case that actually comes up. The actions column is now always drawn. It used to disappear when the only seat was the owner, on the reasoning that there was nothing to act on. But every seat can be renamed, and a column that vanishes does not read as "not applicable here" — it reads as "this product cannot do that", which is how it was reported, three times. The owner's row says "Geschützt" rather than leaving an empty cell. Also caught here: the edit fields carried class-wide #[Validate] attributes, so an empty edit form made the INVITE button fail on a field the invite form does not have. Rules for an action belong to the action. ── The update button "I cannot run an update, it says everything is current." `behind` is a READING taken by the agent every five minutes, not the state of the world — push a commit and the console insists it is up to date and refuses to act. The agent does its own fetch before deciding, so asking against a stale reading costs one fetch and finds nothing; being locked out costs the deployment. The button is now offered whenever an agent is alive and no run is in flight, labelled for what it does rather than for what the last reading said. ── The update never announced that it had finished Because the thing being watched restarts the thing doing the watching. Mid-run every wire:poll request fails, and what answers afterwards is a new build being questioned by the old page's JavaScript — so the card sat on "läuft" until somebody reloaded by hand. A small Alpine watcher now asks a plain JSON endpoint (no Livewire, no component state, no assets), treats a failed request as the restart rather than as a fault worth giving up over, and reloads once the build it is looking at is no longer the build it started with. ── Support The page was a decorated placeholder: a button that raised a toast saying the form was "only hinted at in the prototype", three invented ticket titles living in the translation file, and no way to see what became of anything. It looked thin because nothing on it was real. It now leads with the customer's own requests — what somebody arriving here wants to know is what they asked and whether anyone answered — with contact details moved to the side where they belong. The form attaches the plan, the instance and who is asking automatically: making a customer describe their own server back to the people who built it is the part of support people hate. FAQ answers end where the thing can actually be done, and "is it me or is it you" is answered by a link to the status page. 637 tests. R20 recorded in CLAUDE.md and enforced by EditInModalTest: no page view may grow an input field inside a <td>. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 17:55:49 +02:00
Claude	a58faf3f85	Manage the Stripe key from the console, behind a password and a test ... Changing a key meant a shell, a file edit and a cache rebuild — and the person who owns the Stripe account is not necessarily the person who owns the server. Two gates, not one. The capability decides who may open the page; every operator has console.view, and that must not mean "can read the payment key". The password decides whether this SESSION may see or change anything, because the realistic threat is not a stranger but an unlocked machine, and a session is exactly what that hands over. Both are re-checked server-side on every action — a Livewire action is reachable by anyone who can post to /livewire/update. The value is stored encrypted under a key of its own, SECRETS_KEY, and the vault refuses to work without it rather than falling back to APP_KEY: rotating APP_KEY is ordinary maintenance and would otherwise destroy every stored credential, discovered when Stripe stops answering. It is read where it is used, not overlaid onto config at boot — an overlay adds a query to every request including the public site, and leaves queue workers holding whatever was true when they started. It is never shown again, only outlined, and never enters a Livewire property that would carry it to the browser and back in the snapshot. A registry, not an env editor: a form that can set any environment variable is a privilege-escalation primitive, and one bad value bricks the installation with no way back through that same form. The test button is the part that matters. It reports which Stripe account the key belongs to, whether it is LIVE or test — the most expensive mistake here is pasting one where the other belongs, and both look identical in a form — and which webhook endpoints exist with the events each subscribes to. A key can be perfectly valid while the endpoint listens for the wrong five events, and nothing fails until a payment goes unrecorded. The webhook signing secret deliberately stays in .env. It is read on every incoming payment event; in the database, a database problem becomes silently failing signature checks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 09:01:16 +02:00
Claude	de6821b53e	Move the console off /admin, give the status page its own address, and measure monitoring ... Three things the owner asked for, and one the review found underneath them. The console leaves /admin. It has its own route file now, registered before routes/web.php because once it has a hostname to itself it sits at the ROOT of that host — where `/` and `/settings` also exist for the portal, and the first matching route wins. Where it mounts is one decision in one place: `/` on the console hostname where it has one to itself, `/admin` on any host otherwise. Names stay admin.* in both modes, so nothing that builds a URL has to know. Exclusivity is its own switch, not a consequence of having a hostname. The first attempt made "this host is the console" follow from ADMIN_HOSTS, and a development machine lists its own IP there so the console works without DNS — which took the public site and the portal off that machine entirely. The switch also registers the console on every listed hostname, canonical last, so the alternates that exist as recovery paths keep working. The status page moves out of /legal, where it sat beside the imprint and the terms. Nothing about the current health of the platform is a legal document. It is a real page now: portal, instances, provisioning and backups, each derived from records, aggregate only, and a component with no signal reports "unknown" rather than "operational". That last rule is what exposed the real bug. monitoring_targets.status was written once — 'up', at provisioning — and nothing ever updated it. Both the console's notices and the new public page read it, so an outage would have been published as healthy indefinitely. There is a sync job now, on a five-minute schedule, and a checked_at column so a verdict can go stale instead of standing forever. The monitoring contract had to grow a third state for that to be honest. isHealthy() answers true when no monitoring is configured and false when the monitor is unreachable; recording that boolean would have published either a fleet-wide all-clear nobody measured or a fleet-wide outage that was really one broken monitor. health() returns null for both, the recorder leaves the old verdict to go stale, and isHealthy() keeps its forgiving semantics for the one caller that wants them — the provisioning acceptance check, which must not fail a delivery because monitoring is not set up. Backups are counted from the instances that need protecting rather than from the backup rows that exist, so an instance with no schedule at all cannot be missing from the arithmetic that declares the estate protected. Also: the update panel polls itself, offers the button only when there is something to install, and opens the log while a run is in progress. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 06:05:40 +02:00