107 Commits (v1.3.13)

Author	SHA1	Message	Date
nexxo	6c92aa5dd7	Let an incident be deleted, and start measuring whether the hosts answer ... Three things, all from trying to actually use the incident page. ── Where the later entries go ─────────────────────────────────────────────── The form only ever creates the first one, and nothing said so — so it looked as though the stage had to be chosen up front and there was only a dropdown for the impact. The field now says what it becomes ("wird untersucht") and where the rest are added: on the incident itself, once it exists. ── Deleting ──────────────────────────────────────────────────────────────── Asked for in order to test the thing at all, and right. A whole incident can now be removed, with its entries, behind a confirmation in the product's own dialog (R23). Deliberately not the same as editing an entry, which there is still no way to do: an update is a statement made at a time, and rewriting one afterwards is what the record exists to prevent. Removing the whole incident is a different act — it is how a test entry, or one published against the wrong service, is taken back, and it leaves nothing half-standing behind. A test holds that distinction so the delete button does not quietly become an exception to it. ── The hosts, which nothing was watching ──────────────────────────────────── `hosts.last_seen_at` drove the health dot in the console and was written exactly once, at onboarding — RegisterCapacity stamped it and that was the only write in the codebase. So every host read "offline" thirty minutes after it was added, permanently, and the dot meant nothing. It is also why host reachability could not appear on the status page: it was never being measured. PingHosts asks every host's API the cheapest question it answers, once a minute, and stamps the timestamp on success. Failure writes nothing on purpose: absence IS the signal, and a second column counting failures would be a second version of the same fact. The status page has a fifth component for it. Counts only — never a host name, never an address; the page is world-readable and the estate is not public information. A host between five and thirty minutes silent reads as degraded, not as healthy: "stale" is one of three answers healthState() gives and it is not the good one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 15:16:48 +02:00
nexxo	0e3c50d9a1	Update on a schedule if the owner wants one, and say where incidents go ... ── Where the status page gets its data ────────────────────────────────────── Asked in as many words, and fairly: the page for maintaining incidents exists (console → Betrieb → Störungen) and nothing anywhere said so. The page now carries the answer at the top — what is written there appears publicly at once, the four components measure themselves, and there is a link straight to the live status page. ── Automatic updates, inside a window, switchable ─────────────────────────── Tick it and name the days and hours; leave it alone and nothing changes. The button stays either way: manual is always possible, at any hour. It leaves exactly the same request the button leaves — same file, same agent, same run. A second path into a deployment would be a second set of rules to keep in step with the first, and the automation must not be able to do what an operator is prevented from doing by hand: it checks the same three things the button is disabled by (agent alive, something released, nothing running). Nothing guards against having already updated by hand, and nothing needs to: an installation that is current has nothing available, so pressing the button at four leaves the five o'clock window with nothing to do. That was the owner's own question and it answers itself. Defaults are Tuesday to Thursday, 05:00–06:00. Not Monday — the week starts and every fault costs double. Not Friday — nobody wants to repair a deployment on a Friday afternoon. Not three in the morning: if it goes wrong, the person who has to fix it is asleep. A window whose end is before its start wraps past midnight, because 23:00 to 02:00 is a reasonable thing to ask for and reading it as an empty range would silently mean "never". Switched on with no weekday selected is refused rather than corrected — it is a configuration that reads as working and does nothing. The clock is the wall clock (R19): an operator who writes 05:00 means five in the morning where they live, and a window that drifts by an hour twice a year is a window nobody trusts. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 15:01:54 +02:00
nexxo	ea643b5e73	Prove a custom domain before serving it, and keep proving it ... Two things. ── The update screen, still opening twice ─────────────────────────────────── Reported again on 1.3.9, and the cause was not the one fixed in 1.3.8. The agent consumes the request file BEFORE it resolves the release — deliberately, because update.sh may kill the shell and a request left in place would loop — and writes `state: running` only once it has decided to go ahead. In between, the request is gone and the status does not say running yet, so the endpoint honestly answers "nothing is running". The watcher read that as "the run has finished" and reloaded the page: overlay on the click, gone a poll later, 503 after it. The overlay now closes only once the server has BOTH confirmed a run and then stopped reporting it. Before the confirmation, silence means the agent has not got there yet. Bounded at twenty polls so a request the agent refuses does not leave the console covered forever. ── Custom domains, proven and re-proven ───────────────────────────────────── `custom_domain` was a free-text field and everything downstream believed it: the proxy served it, the certificate was issued for it, Nextcloud trusted it. Anyone who pointed any hostname at the platform got somebody else's files under their own name. The proof is a TXT record at _clupilot-challenge.<domain> holding a token only this instance has. Nothing is served until it has been read. Every reader now goes through Instance::address(), which is the one place the decision is made — `custom_domain ?: subdomain` was the hole, written out four times. It is re-read every night at 03:40, because a token checked once can be taken straight back out and a domain that later lapses keeps resolving here. Three consecutive misses before a live domain is withdrawn: one failed lookup is a nameserver having a bad minute, and withdrawing takes a working Nextcloud off its own address. The domain and its token stay on the row so the customer can put the record back rather than start over. Changing the domain mints a NEW token. Reusing it would let somebody who once verified example.com claim any other domain later without touching its DNS — the old record is still sitting there and only the value is compared. The domain is changeable at any time, and removable. Fixing it once set was considered and rejected: adding or moving an address is a proxy entry, a certificate and one line in trusted_domains. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 14:47:51 +02:00
nexxo	17a6fabcc2	One wordmark, one typeface, and the address the server actually issues ... Reported as "logo and font are different everywhere" — maintenance page, customer panel, console, homepage. They were. Counting them up: the site header set the name in ink at -0.02em, the sidebar split it into "Clu" plus an orange "Pilot", the sign-in plate set it white at a third size, the customer two-factor page set it in MONO with no mark at all, the error pages and the placeholder each inlined their own — and the maintenance screen had no wordmark whatsoever. Nine surfaces, seven ideas of the brand. There is one now: resources/views/components/ui/brand.blade.php. Mark plus wordmark in one piece, in ink, with an optional muted "Cloud". No orange half — that made the accent a permanent fixture instead of something used sparingly. The four places that cannot use a Blade component (the two self-contained pages, the error layout, the mail layout) inline it and are held to the same shape by a test. The typeface. The console loads IBM Plex through Vite; the 503 page has no stylesheet at all, so the maintenance screen — the one page shown when somebody is already worried — was rendering in the system sans. It declares the fonts itself now. And the bold weight was missing from public/fonts entirely: the placeholder and the error pages both asked for ibm-plex-sans-latin-700-normal.woff2, which was not there. A @font-face pointing at nothing fails silently, which is why nobody noticed. The error pages carried the same two faults the placeholder shipped with: an empty gradient tile where the mark belongs, and `gap` on an inline-flex row spacing "Clu", "Pilot" and "Cloud" apart as three separate words. And the price sheet promised "Adresse auf clupilot.cloud" — a domain the company does not own — while provisioning was issuing addresses under whatever CLUPILOT_DNS_ZONE says. It is assembled from that setting now, the same reason the prices are read from the catalogue rather than typed into the page. welcome.blade.php removed: Laravel's leftover, reachable from no route. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 14:30:44 +02:00
nexxo	4ef5b9519c	Let the owner mark one plan as recommended, from the console ... Recommended lives on the plan family, not a version: it is a stance about the product line ("which plan we point a visitor towards"), not a capability that changes with a price, and freezing it per version would make the mark silently vanish every time a new version publishes. Setting a plan recommended clears whichever other plan carried the mark, inside one transaction locking the whole table — two operators recommending two different plans at once must not both win. The public price sheet already had the highlighted-card treatment for this (it was driven by a hardcoded "team" constant); it now reads the family instead.	2026-07-29 14:22:22 +02:00
nexxo	b843c10ec3	Give the update screen the product's colours, and only one window ... Two complaints, both correct, both mine. Dark blue. The panel carried a `prefers-color-scheme: dark` block — the only one in a product that has no dark mode. On a phone set to dark the update screen, and nothing else, turned dark blue. A dark mode for one page is not a dark mode; it is one page that does not match. It is gone. And even in daylight the panel was not this product's colours: it used Tailwind's slate ramp (#0f172a, #64748b, #e2e8f0), which is blue-tinted, against neutrals that are warm. Every value is now a copy of a token from portal-tokens.css, with the comment saying so, because this file cannot import them — it renders when the asset build may not exist. The small window then the big one. The settings card grew its own little "läuft gerade" block the instant a run started; up to three seconds later the full-page overlay covered it and said the same thing in a different size. The card no longer says it at all, and the overlay now opens on the button's own click — requestUpdate dispatches an event, but only once a run is actually pending, so a refused second press does not black out the console. Two more things found while looking: The panel had `min-height: 100%`, which resolves against the parent's height. On the 503 page the parent is <body>, whose height is auto — so it computed to zero, the panel was only as tall as its text, and the bottom two thirds of the screen stayed the browser's default white. Viewport units now, dvh so a phone's collapsing address bar leaves no strip either. And the mark was a plain orange tile again, the same empty-square that was just fixed on the placeholder. The real logo is inlined. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 14:11:01 +02:00
nexxo	b85df4c141	Rebuild the status page as a status page ... Asked for after looking at how real ones are built. The shape they all share is a convention, and a convention is what lets somebody find the answer without being taught the page: banner, components each with ninety days of uptime, then the written record underneath. This page had only the banner — the version that is of no use the morning after, because "Alle Dienste in Betrieb" is true and says nothing to somebody who was locked out the evening before. Three things are new. The ninety-day bar. It cannot be reconstructed after the fact: the monitoring table holds the last verdict per instance, not a history. So a sampler (clupilot:sample-status, every five minutes beside the monitoring sync) writes counts into one row per component per day, and the page divides them. A day with no row is drawn as a gap and says "nicht aufgezeichnet" — never green. Degraded samples count as reachable in the percentage but still colour the day: folding them into downtime reports a slow morning as an outage, ignoring them loses the only trace of it. The incident record. An operator reports a disruption in the console, posts updates as it develops, and the entry that says "behoben" is the same action that closes it — two separate steps is how a page ends up with a resolved note under an incident that still reports as ongoing. There is deliberately no way to edit an update: it is a statement made at a time, corrections are a further entry. An open incident may make a component look worse than the probes found it, never better. Scheduled maintenance, from the windows the console already keeps rather than a second list somebody has to remember to fill in. The measurement moved out of the controller into ServiceHealth, shared with the sampler, so the banner and the bars cannot disagree about what "healthy" means. The page now uses the shared design system and the site's header and footer. Its self-contained stylesheet was there to survive a broken asset build; it does not survive one — if the stylesheet cannot be served the application serving this page is already failing, and mid-deployment every route answers with the maintenance page. What the exemption bought was a third design nobody maintained. Found while building: durationMinutes had its operands the wrong way round, and diffInMinutes is signed, so the public page printed "Dauer -86 Minuten". Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 12:45:18 +02:00
nexxo	3b85e8f1d1	Grant a package or module from the customer's row in the console ... GrantPlan is a modal (R20), opened from a "Schenken" button on the customer's own row in Admin\Customers, gated by customers.grant_plan rather than merely hidden. It offers a whole package (plan, term, datacenter, an optional quota bonus baked into the frozen snapshot) or a module on an existing contract, either free or at a discount the operator sets against today's catalogue price. Existing grants show on the same modal — who gave what, when, and until when — with a warning once a dated grant is nearing its end; nothing lapses on its own, exactly as decided. The customers list also badges a granted plan in the Paket column.	2026-07-29 12:42:21 +02:00
nexxo	c71b2c362b	Skip the invoice for a full gift, keep it out of revenue, hide its price ... IssueInvoice now rejects free-grant orders before it will consume an invoice number for them — a full gift produces no invoice at all, while a discounted grant still charges something and is invoiced exactly like an ordinary sale. Keyed on the linked subscription/add-on's own provenance, not on the amount being zero, so a genuinely fully-discounted Stripe checkout is unaffected. Revenue excludes granted contracts from MRR/ARR/ARPU and the contracts count — a gift at 0 must not drag the average down — and shows their number as its own KPI instead of folding it in, since the owner measures himself on it. The portal (Cloud, Billing) shows a granted package or module without a price at all: not "free", not struck through, just the service, so a later conversion to paid does not read as a negotiation.	2026-07-29 12:41:32 +02:00
nexxo	15b536f393	Mint the archive collection key from the console instead of by hand ... Setting a NAS up to collect the invoice archive meant three machines and a dozen commands: generate a keypair there, carry the public half to the server, write it into authorized_keys with a restriction, install rsync, and get every path right on the first try. Every one of those steps was a place to be told "permission denied" with no clue which of the three was wrong. It was, and several times over. One button now. The panel asks, the host does it — because the host is where all of it lives: the home directory, ssh-keygen, rrsync, and the archive itself. The panel is www-data in a container and owns none of that, so it uses the mailbox it already uses for updates. The private half is shown exactly once, alongside the finished rsync command, and is never written to the database: it exists to be copied into a NAS, and storing it "for convenience" would put a working credential in every backup of that database. rrsync does the restricting, not a pinned rsync option string. That string differs between rsync versions and fails silently — a refusal with no reason given, which is the shape of the afternoon this replaces. If rrsync is missing the agent refuses rather than issuing an unrestricted key while the panel says it is restricted. rsync now comes with install-agent.sh, which already runs as root once per machine. It has to be on the HOST: a NAS connects by ssh and sshd starts `rsync --server` here, so without it the pull fails with "command not found" from a NAS whose own setup is perfectly correct. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 10:08:32 +02:00
nexxo	d8ff717cb5	Let a destination say how it is laid out and how long anything stays ... Two destinations doing two jobs. A handover directory a NAS collects from wants a folder per day and wants emptying — thirty days is enough to notice a NAS that stopped collecting, and keeping more only hides it. An archive on the NAS itself wants a folder per year and wants nothing deleted, ever. So both are per destination rather than global. Deleting is safe here in a way it usually is not, and that is worth saying plainly: the invoice is a frozen document in the database and its PDF is rendered from that on demand. Nothing is moved anywhere — it is copied, and anything removed from a directory can be produced again and re-exported. The directory is a handover point, not the record. keep_days is null by default and stays null unless somebody sets it: a retention rule nobody asked for is a deletion nobody expected. The prune only touches folders whose NAME is one of the two shapes this application writes, and leaves everything else alone — a prune that deletes what it does not recognise is how an archive loses something nobody was watching. It also skips a destination whose path is missing rather than acting on whatever is underneath an absent mountpoint. The shape is matched with a pattern before parsing rather than by handing nonsense to Carbon: under strict mode createFromFormat throws instead of returning false, so one folder somebody made by hand would have ended the whole prune instead of being skipped. The test with a foreign folder in it found that. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 03:08:27 +02:00
nexxo	0528b56a32	Name no vendor in the export settings ... A destination is a kind of connection, not a product. The wording said "Hetzner Storage Box" and the host field suggested one particular provider's hostname format, which reads as a requirement rather than an example — and the whole point of the directory kind is that whatever is behind it is nobody's business here. Both kinds stay. A directory is how an NFS 4.1 mount is used: the mount is made on the server, and the application writes into the path it produces. SFTP is for a destination that is not mounted. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:49:33 +02:00
nexxo	b3081a544b	Let the export have as many destinations as somebody wants ... One path and one exported_at could not say "on the office NAS, not yet on the off-site box" — which is the only interesting question once there is more than one destination, and the reason for a second is precisely that any single one can fail. A row per destination now, and a row per (invoice, destination) pair. Two kinds, and the difference is where the protocol lives. 'local' is a directory this machine can already write to: a NAS mounted over NFS 4.1, a bind mount, a disk. The application knows nothing about the protocol, the target changes without code changing with it, and the whole thing stays testable against a temporary directory. 'sftp' is for something reachable with credentials — a Hetzner Storage Box being the obvious one — and the password goes into the secret vault with only its key on the row, because a credential in a settings table is a credential in every database dump. An empty password field on an existing target means unchanged, not cleared: the field cannot show what is stored, so blank-means-delete would wipe it on every unrelated edit. One job per pair rather than one per invoice. A job writing to both would retry the one that worked every time the other did not, and report one outcome for two different things. The ordering fix the tests found: Laravel's local adapter creates its root when it is CONSTRUCTED, so the "never create the root" guard was checking a directory the disk had just made for it. It runs before the disk is built now. That guard is the difference between an archive and a hole in the ground — mkdir on an absent mountpoint succeeds, writes onto the container's own disk and reports success, and an archive that silently is not the archive is worse than none. The single path from the previous commit is migrated into a destination called "Archiv" rather than dropped. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:43:15 +02:00
nexxo	ab4b0311d4	Copy every invoice to the archive when it is issued, and notice when that fails ... The application knows nothing about NFS and should not. It writes to a directory; whether that is a local disk, a bind mount or a NAS over NFS 4.1 belongs to the mount. No protocol library, the target changes without code changing with it, and the whole thing is testable against a temp directory. The finding that shaped it: mkdir -p on a path whose mount is NOT there succeeds. It creates the empty directory beneath the mountpoint, writes the invoice onto the container's own disk and reports success — so an unmounted NAS would quietly collect invoices locally while every check said it worked. An archive that silently is not the archive is worse than none. The root is therefore never created, only used: a missing root means a missing mount, and that is a failure. Only the year subdirectory is created, inside a root already proven to exist. Written to a .part and renamed. A rename within one filesystem is atomic, so whatever watches that folder never sees a truncated PDF and takes it for a finished invoice. The size is read back afterwards rather than the write being trusted: over a network mount a short write can report success, and an archive of truncated files looks exactly like one that worked. Queued, not done during the request. A network mount can block for its whole timeout, and an invoice must not fail to be issued because a NAS is rebooting. Dispatched after the commit, or a worker could look for an invoice that has not landed yet. And copy-on-issue is not enough on its own: an invoice issued while the office connection was down never arrives, the queue eventually gives up, and nobody opens an archive to check whether last Tuesday is in it. An hourly sweep re-queues whatever is still missing, the failure is recorded on the invoice rather than only in a log, and the Finance page says how many are outstanding. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:32:08 +02:00
nexxo	33e5b15099	Restart the workers automatically after saving .env, instead of handing the operator back to the shell ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:26:34 +02:00
nexxo	86bf4f26e0	List issued invoices in the console, with no way to change one ... Read-only by design, and the absence is the feature: an issued invoice is corrected by cancelling it and issuing another, which is the only lawful way to correct one. There is no edit button here whose absence needs explaining, and a test asserts there is none. The PDF is a plain route rather than a Livewire action. A download is a download, and routing one through a component round-trip only adds a way for it to fail. Two findings on the way, and both were mine. The year filter used YEAR() in raw SQL, which is MySQL's. SQLite has no such function, so the page worked against the real database and threw against the test one — a query that only runs on one engine makes the test database a different product from the one being shipped. The years are derived in PHP now. And a test put a User on the operator guard, where EnsureAdmin calls isActive() on it and a 403 becomes a 500. Not a code defect: actingAs() calls Auth::shouldUse(), so a second actingAs() in the same test with no guard named lands on whichever guard the FIRST one named. That trap is written up in CLAUDE.md, I quoted it earlier today, and I walked into it anyway. The tests are split now and both name their guard. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:21:15 +02:00
nexxo	90131f088a	Add a raw .env editor to the Integrations page, with a net under it ... Everything the console has no field for is still real — MAIL_*, DB_*, APP_KEY, whichever key nobody has built a form for yet — and without a way to touch it from here, the operator needs a shell and the console page misses its own point. EnvFileEditor is the net, not just the warning: 1. Validates before writing. A line that is neither blank, nor a comment, nor KEY=value is rejected outright, and an empty file (syntactically "valid" by that rule, but not survivable) is refused too. write() never touches the file before checking the new content. 2. Backs up before every write that actually happens — a timestamped copy beside .env, before the new content lands. Never pruned automatically; the page says so, next to where it says where they land. 3. Names the keys a mistake here can lock an operator out with — APP_KEY, DB_*, REDIS_*, SESSION_* — rather than a blanket warning nobody reads. 4. Gated by secrets.manage and the same confirmed password the vault entries use — this is the one place on the page that can reach every credential the vault otherwise keeps write-only. 5. Says plainly what saving does not do: queue, queue-provisioning, scheduler and reverb only read .env at their own startup, and names the restart command plus config:clear. 6. Marks which .env keys SecretVault currently overrides, so editing a line that a stored vault value already shadows does not look broken. Two issues surfaced by Codex review and fixed before this commit: the raw file content stayed in the Livewire component snapshot after the password confirmation window expired on its own (not only on an explicit re-lock), and the first save on an installation with no .env yet failed trying to back up a file that was never there. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:51:27 +02:00
nexxo	3fadaa14b0	Merge credentials and infrastructure into one Integrations page ... Zugangsdaten and Infrastruktur split the same subject by storage mechanism — SecretVault vs App\Support\Settings — instead of by what each field configures, which is not a distinction an operator setting up Stripe or DNS should have to know or care about. One page now, grouped by integration: Zahlungen (Stripe), DNS (Hetzner), Monitoring, VPN/WireGuard, SSH-Identität. A secret and a plain setting sit side by side within a section; the difference stays visible — a vault entry is write-only and shows only an outline, a setting shows its value in full — as a property of the field, not a reason for a separate page. Both storage mechanisms are unchanged underneath: this is a presentation change, not a data migration. The vault keeps its own gate (secrets.manage + a recently confirmed password); plain settings keep theirs (hosts.manage alone). Reachable with either capability, since the two are no longer two pages a role happens to see one, both, or neither of — every section and every save action still checks its own capability server-side. admin.secrets and admin.infrastructure redirect here permanently rather than 404ing a bookmark. The nav entry that replaces both is visible to either capability — Navigation's capability field now accepts an array meaning "any of these", not only a single ability. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:49:39 +02:00
nexxo	77bd30ca56	Answer on every name for the website, and send them all to one ... SITE_HOST takes a comma-separated list now, the first name canonical. It serves the site; every other name in the list redirects there permanently, path and query intact. An apex domain and its www are two names for one thing, and answering on both without picking one splits search rankings and cookies between them. The redirect is a host-bound catch-all rather than middleware. Middleware that only some routes carry is the same half-measure this file already made once, and a catch-all registered without a host would swallow every path in the application — which is what the third test is there to stop. The test harness needed fixing too, and the fix is the finding. Router::dispatch on a standalone router does not rebind the container's request, so a route reading one — through the helper OR through an injected parameter, both of which resolve from the container — gets the test's request rather than the one being answered. The redirect silently lost its query string in the test while working in production. dispatchOn() binds it where the framework would. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:29:33 +02:00
nexxo	e6d2e6dc33	Give the console a Finance tab: company details, VAT rate, invoice series ... Its own tab rather than a section of Settings, as asked. What is set here appears on a legal document, and burying it beside the site-visibility switch invites somebody to change one in passing. Everything the printed invoice needs — registered name, address, Firmenbuch number and court, VAT ID, bank details, payment terms, logo — with the logo replaceable, because a company changes its mark. None of it reaches an invoice that already exists: the values are copied into each document when its number is assigned, so a corrected address is correct from the next one onwards and cannot rewrite an old one. The console refuses to consider itself ready while a name, an address or a VAT number is missing, and says which. An invoice without them is not a valid invoice in Austria, and issuing one is worse than refusing to. The series editor carries the same shape as EditDatacenter and for the same reason. The prefix is free while the series is empty and frozen once a document carries it: changing RE to AR renames nothing and leaves a series whose past says RE and whose future says AR, with no record they belong together. The counter may be raised — an operator migrating from another system needs exactly that — but never lowered, because a lower number is one already printed on a document somebody holds. Both rules are recomputed from the database on save rather than read back from the properties the browser returns. CompanyProfile drops keys that are not part of the profile. It is fed from a form, and a forged key must not be able to write an arbitrary setting into the same table the site-visibility switch lives in. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:18:43 +02:00
nexxo	864126ec7f	Add the SSH identity to the vault, and give deployment config a console page ... The SSH private key CluPilot deploys to every host is now stored through SecretVault (ssh.private_key), preferred over CLUPILOT_SSH_PRIVATE_KEY(_PATH) at all three real consumers — SshTraefikWriter and HostStep::keyLogin. kuma.password/kuma.totp stay in .env: they authenticate a separate Python container at boot, and nothing in this app reads them, so the vault would have nothing to wire them to. A new /admin/infrastructure page, backed by App\Support\ProvisioningSettings, makes the non-secret deployment settings that used to force a shell — DNS zone, WireGuard hub endpoint and public key, Traefik's dynamic-config path, the SSH public key, and the monitoring bridge URL — visible and editable from the console, each wired to every real consumer. WG subnet/hub IP and Kuma's own connection details stay in .env: the compose file and a separate container read those before this application ever does.	2026-07-29 00:52:44 +02:00
nexxo	7a5a71dc89	Read VPN host state from the synced peer table, not a live hub call	2026-07-29 00:18:21 +02:00
nexxo	eb743d34ed	Show WireGuard tunnel state per host in the hosts list	2026-07-29 00:10:15 +02:00
nexxo	5b8c28595a	Require a confirmed address before an account can use anything ... Registration opened an account that could sign in immediately on an address nobody had proved was theirs — and anybody can type a stranger's into a registration form. Both halves were commented out: the Fortify feature and MustVerifyEmail on the model. `verified` sits on the whole portal group rather than on the pages that spend money. An unconfirmed address is not a billing problem to be caught at checkout; it is an account that may not belong to the person holding it, and the servers, the users and the backups behind it are worth as much to whoever typed the address as to whoever owns it. The mail is a Mailable in this product's design rather than Laravel's notification, which would arrive with the framework's logo, button and footer as the first thing anybody ever receives from CluPilot. It also has to leave through the SYSTEM mailbox like every other account mail, which the notification path does not do on its own. The link is signed and expires, and the address is part of what is signed — so a link issued to a mistyped address stops working the moment the address is corrected, rather than confirming an address nobody can read. Tests cover the tampered link, the expired one, the corrected address, and one account trying to confirm another. The waiting page is ours (Fortify has views off) and offers the only two things that move somebody forward: send it again, or sign out and register with the address they meant. The resend is throttled, because otherwise it is a button that makes the server send mail to an arbitrary address as fast as it can be clicked. Somebody already confirmed is redirected away from it — the `verified` middleware only guards the other direction. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 23:43:20 +02:00
nexxo	07141a96bf	Show where an account is signed in, and let it sign the other places out ... Completes the device work: the warning mail now has somewhere to send people. A warning whose only advice is "if this was not you, take action" names a problem and hands back nothing to do about it. Both sides get their own component rather than one shared with the guard passed in. Operators and customers are two guards and two tables (R21) — a component taking the guard as input is one forged property away from listing and ending the other side's sessions. Every query in SessionRegistry is scoped by guard as well as by id for the same reason, and three tests hold that line, because the unscoped version looks exactly like a working feature while doing it. TouchLoginSession keeps each row pointing at the session it describes. Both sign-in paths raise the Login event BEFORE session()->regenerate(), so the row is written against an id that is dead a moment later — and the once-a-minute throttle would have held the correction back for the first minute of every session, hiding the session its reader is sitting in. A changed id is therefore never throttled. A session counts as live only if the framework's row exists AND was touched within the session lifetime. The join alone is not enough: Laravel collects expired sessions by lottery, so on a quiet installation rows sit there for days and the list would offer somebody a laptop they shut last month. Ending the others goes through the product's own modal (R23) and leaves the asking session alone: signing somebody out of the page they are using to sign other people out is not what the button says. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 23:38:17 +02:00
nexxo	75b4a47768	Stop mailing the initial admin password, hold it in the panel until noted ... The password no longer travels through third-party mail servers or sits forever in an inbox: it moves onto the instance (encrypted, same as nc_admin_ref) and shows on the dashboard until the customer clicks "Notiert", which deletes it for good.	2026-07-28 23:19:20 +02:00
nexxo	21b7aaca42	Update only to a released version, never to whatever landed on main ... Asked for directly: a commit on main must change nothing on a server, and only a tag whose version is higher than the installed one may be installed. The agent asked two different questions before this. A pinned server compared tags; everything else counted commits on its branch — so a console following main offered an update for every push, verified or not, and "Jetzt aktualisieren" meant "take whatever is on the branch right now". Landing on main and being released are different events, and only the second is a decision somebody made. It is one question now, regardless of what the checkout is attached to: is there a tag whose version is higher than the deployed one? Compared with sort -V against the version in the deployment manifest — not the VERSION file, which an update moves before it migrates, so a run that failed in between would leave the checkout claiming a version it never finished installing. A run always targets that tag; the branch path is gone. A request that arrives with nothing to install is answered rather than obeyed, before anything announces a run. The console follows: the button is disabled with nothing released, says so in a line rather than leaving a grey button to be guessed at, names the version it would install rather than a count, and refuses the action server-side as well — a Livewire action is a public endpoint, and one place a rule may not live is only in the disabled attribute of a button. VERSION becomes 1.1.0, to be tagged as the first release this mechanism can see. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 22:32:44 +02:00
nexxo	184350494d	Let a half-finished two-factor enrolment be cancelled, and rework the setup page ... Found uncommitted in the working tree at the start of this session and carried in as its own commit so it can be reverted on its own. Not written here: a cancel action that clears an unconfirmed secret, the wording for every state of the page, and a rebuilt setup view. The suite is green with it in place, including the R18-R23 scan tests.	2026-07-28 22:25:27 +02:00
nexxo	d65ab71029	Let a datacenter code be corrected while nothing depends on it, and say which building ... The code was immutable, which made a typo permanent. It cannot be freely mutable either, and not only because hosts.datacenter references it: each host's DNS name was minted from it and registered at the provider, the machine's own hostname was set from it as it was built, the counter handing out those numbers is keyed by it, and every past order stores it as plain text with no foreign key to follow. Renaming a code with hosts in it is not a rename — it is a datacenter called hel full of machines called fsn-01. So it is editable exactly while nothing references it, which is the case that matters: a typo noticed shortly after creating one. Once a host or an order depends on it the field is disabled and says what is holding it, with the numbers. The lock is recomputed from the database on every save, never read back from the property the browser returns. Alongside it, an optional free-text field for the specific datacenter — fsn-dc-15. A provider runs several within one location, on separate power and separate uplinks, and two entries both reading "Falkenstein (fsn)" are not a choice anybody can make. Nothing keys off it; the code remains the identifier. Also renames the country loop variables in the edit modal. They were $code and $name — the component's own properties — and shadowed them for the rest of the file. Harmless while nothing below the loop read them, which stopped being true the moment the code became an editable field above it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 22:25:21 +02:00
nexxo	07634c8a1d	Answer a check at once, start an update at once, and count down to neither ... Checking for updates was a request written into the same mailbox as a real update, collected by the same agent on the same systemd timer — so asking what was new was answered on the next tick, and the console, having nothing else to show, counted down to it. An operator who asked a question was told an update would start in 3:44. A systemd path unit now wakes the agent the moment the request file is written, for a check and for a run alike. PathChanged, not PathExists: PathExists re-arms as soon as the service goes inactive, so a request the agent could not consume — it holds a lock for the length of an update — would restart it in a tight loop. The timer stays as the fallback, and a drop-in disables systemd's start rate limit, because two triggers on one oneshot service can otherwise wedge the unit and leave neither of them able to run. The countdown is gone from both the settings card and the maintenance overlay. It could not be made honest: its target was recomputed on every poll, and where the interval the agent reports is shorter than the timer actually installed on that host it had already gone by, so the fallback moved it forward again each time. It ran backwards four seconds and snapped back to a full minute, forever — reported exactly that way. A queued run says it is starting; a queued check says nothing beyond its badge, because a check starts nothing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 22:25:07 +02:00
nexxo	f05547921d	Separate checking for updates from applying them, and show live progress	2026-07-28 20:23:06 +02:00
nexxo	973fcb3f2d	Replace native confirm() dialogs with the app's own modal pattern	2026-07-28 19:34:27 +02:00
nexxo	c2681f2801	Show a full-screen overlay on every console page while an update runs ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 18:50:45 +02:00
nexxo	254674f456	Bound the mail test-send and real send to a timeout instead of hanging ... A blocked outbound port (587 filtered at a firewall, as on the live server) left both MailboxTester and MailboxTransport blocking until PHP's default_socket_timeout (60s) or the reverse proxy cut the request — a 504 with no error the operator ever saw. Mail::build() honours a 'timeout' config key by calling SocketStream::setTimeout() (confirmed by reading MailManager::configureSmtpTransport() and by an end-to-end run against a genuinely unroutable host), so MailboxTester now passes 'timeout' => 10 through it. MailboxTransport builds its EsmtpTransport directly rather than through Mail::build(), so it sets the same call on the transport's stream, at 30s — a queue worker can afford to wait longer than an operator watching a browser, and a timed-out send is retried rather than lost. The test button also now shows a visible "sending" state while the request is in flight, matching the wire:loading span pattern already used on admin/host-create's save button — previously only wire:loading.attr="disabled" fired, leaving a greyed-out button with no other sign anything was happening. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 16:36:14 +02:00
nexxo	27292237c3	Move operator two-factor enrolment off admin.settings onto its own page ... RequireOperatorTwoFactor exempted the whole of admin.settings while compulsory two-factor was on, on the theory that it was "the page where two-factor is set up". That component also carries staff management, site visibility, network restrictions, account changes, and the two-factor policy switch itself, so an unenrolled operator got unrestricted access to all of that, not just enrolment. Enrolment (secret, QR, confirm, recovery codes, regenerate, disable) moves to its own route and component, admin.two-factor-setup / Admin\TwoFactorSetup, reachable by every operator regardless of capability. That is now the only page the middleware exempts besides logout, and its redirect points there instead. admin.settings goes back behind the policy like every other console page; only the policy switch itself stays there, since only someone who already satisfies it should be the one changing it.	2026-07-28 15:11:20 +02:00
nexxo	913d19d39c	Give operators somewhere to actually set up two-factor ... console.require_2fa exempted admin.settings from the redirect it forces on an unconfirmed operator, but that page only ever configured the global policy — nobody could enrol behind it. A newly invited operator stayed permanently redirected to a page with no way to satisfy the requirement, the opposite of what the switch was for. Adds enable/confirm/regenerate/disable to Admin\Settings, reusing Fortify's own actions exactly as the portal's Settings already does — they only ever touch the model they're handed, no guard or auth() call inside them, so pointing ConfirmsPassword's guard at 'operator' is the only change needed. The new card is deliberately not gated behind the site.manage capability that hides the rest of this page's Owner-only sections: the compulsory switch applies to every operator, so enrolment has to be reachable by every operator too. Dropped the account card's stale hint pointing at a "separate security area" that never existed.	2026-07-28 14:21:02 +02:00
nexxo	e519653f66	Let the owner make two-factor compulsory, without locking themselves out	2026-07-28 12:08:08 +02:00
nexxo	3f318c3f6a	Give the console a front door of its own	2026-07-28 11:45:22 +02:00
nexxo	5d306fce31	Let a mailbox send without a password when it never needed one ... An SMTP relay with a host and a from address but no username or password - a trusted local or private-network relay - always used to be seeded as a placeholder, because the takeover required a username to treat an account as real, and Mailbox::isConfigured() always required a stored password. Laravel's own SMTP mailer has supported unauthenticated relays all along. Add mailboxes.authenticates (default true, so every existing row keeps its current behaviour) to tell "does not authenticate" apart from "authenticates, but nobody has typed the password yet" - the same empty password column used to mean both. The takeover migration now seeds the real account off the host/address alone and marks it authenticates=false only when neither a username nor a password resolved; isConfigured(), MailboxTransport and MailboxTester all read it before requiring or sending a password; the edit modal gets a checkbox for it with the password field's hint updated to match, in both languages.	2026-07-28 05:54:21 +02:00
nexxo	5de1f45703	Close two ways a mail.manage session could take over outgoing mail ... I3: nothing stopped an operator unchecking Aktiv on the mailbox that mail.purpose.system points at. MailboxResolver::active() filters an inactive mailbox at BOTH the direct lookup and the system fallback, so that one checkbox could take mail.purpose.system to null and every purpose without its own mapping down with it — the existing system_required guard on savePurposes() reads as if this were covered, but it only blocks the empty-mapping path, not this one. EditMailbox::save() now refuses active=false against the mailbox 'system' currently points at, the same way savePurposes() already refuses to leave 'system' empty. I4: Admin\Mail::saveServer() writes mail.host — the platform's outbound relay for every purpose mailbox at once — and CloudReady::toMail() puts a customer's Nextcloud admin password in cleartext in the message body. So a signed-in mail.manage session was already a credential-interception primitive, the same threat Admin\Secrets' second gate exists for. Both saveServer() and EditMailbox::save() (only when a new password is actually being typed) now also require passwordRecentlyConfirmed(), following the ConfirmsPassword pattern Secrets.php and Settings.php's two-factor actions already use — including their per-action UI shape (an inline confirm form scoped to the gated action), not a whole-page lock, so address, display name, username, no-reply, active and the purpose mapping stay reachable without confirming, per the brief's capability split. Both gated and ungated paths are covered by tests, and both guards were mutated away and confirmed to fail before being restored.	2026-07-28 03:50:19 +02:00
nexxo	befb67327f	Prove a mailbox works by actually sending from it	2026-07-28 02:56:47 +02:00
nexxo	4211f3dfab	Give the mailboxes a page, and the support sender its own capability	2026-07-28 01:57:11 +02:00
nexxo	9b8d5dfd1e	Editing in modals, an update button that is not gated on a stale reading, and a support page that is real ... Three things reported together. ── Editing belongs in a modal (R20) The seats table grew its input fields into the row. It worked and it looked broken: the row grew, the columns beside it jumped, and a table half in edit mode reads as a rendering fault rather than as a form. The project already had the answer — EditDatacenter, whose own header comment says it avoids exactly that row-height jump — and the seats table simply did not use it. EditSeat is now a ModalComponent. A modal is reachable WITHOUT the page's route middleware, so it resolves the customer itself and re-reads the record rather than trusting a hydrated property: a forged addressEditable would otherwise open the address of an accepted seat, and the address is the person — editing it hands one employee's access to another with nobody told. Only an invitation still in flight can have its address corrected, which is the case that actually comes up. The actions column is now always drawn. It used to disappear when the only seat was the owner, on the reasoning that there was nothing to act on. But every seat can be renamed, and a column that vanishes does not read as "not applicable here" — it reads as "this product cannot do that", which is how it was reported, three times. The owner's row says "Geschützt" rather than leaving an empty cell. Also caught here: the edit fields carried class-wide #[Validate] attributes, so an empty edit form made the INVITE button fail on a field the invite form does not have. Rules for an action belong to the action. ── The update button "I cannot run an update, it says everything is current." `behind` is a READING taken by the agent every five minutes, not the state of the world — push a commit and the console insists it is up to date and refuses to act. The agent does its own fetch before deciding, so asking against a stale reading costs one fetch and finds nothing; being locked out costs the deployment. The button is now offered whenever an agent is alive and no run is in flight, labelled for what it does rather than for what the last reading said. ── The update never announced that it had finished Because the thing being watched restarts the thing doing the watching. Mid-run every wire:poll request fails, and what answers afterwards is a new build being questioned by the old page's JavaScript — so the card sat on "läuft" until somebody reloaded by hand. A small Alpine watcher now asks a plain JSON endpoint (no Livewire, no component state, no assets), treats a failed request as the restart rather than as a fault worth giving up over, and reloads once the build it is looking at is no longer the build it started with. ── Support The page was a decorated placeholder: a button that raised a toast saying the form was "only hinted at in the prototype", three invented ticket titles living in the translation file, and no way to see what became of anything. It looked thin because nothing on it was real. It now leads with the customer's own requests — what somebody arriving here wants to know is what they asked and whether anyone answered — with contact details moved to the side where they belong. The form attaches the plan, the instance and who is asking automatically: making a customer describe their own server back to the people who built it is the part of support people hate. FAQ answers end where the thing can actually be done, and "is it me or is it you" is answered by a link to the status page. 637 tests. R20 recorded in CLAUDE.md and enforced by EditInModalTest: no page view may grow an input field inside a <td>. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 17:55:49 +02:00
nexxo	bd779f00e5	Show times on the operator's clock, keep storing them in UTC ... The console announced an update for "spätestens um 15:21" while the clock on the wall said 17:21. Not a formatting slip in one string: fourteen views and four components printed database values straight out, so every absolute time in the product was two hours out all summer and one hour out all winter. Two of those views looked as though they had handled it. They called ->timezone(config('app.timezone')) which reads like "convert to local time" and, app.timezone being the STORAGE zone that must stay UTC, converts to UTC — a no-op wearing the costume of a fix, which is worse than no call at all because it stops the next person looking. That exact string is now banned by test. Worse than the labels were two FORMS. Maintenance windows and plan versions filled their datetime-local fields from UTC and parsed what came back as UTC. A datetime-local field carries no offset — it is the digits a person reads off their own clock — so an operator typing 21:00 scheduled a window for 23:00 their time, and nothing anywhere said so. App\Support\LocalTime now holds toField() and fromField() side by side, because getting one end right is not half a fix, it is a fresh bug. The mechanism is one Carbon macro, ->local(). It copies before converting: Illuminate\Support\Carbon is mutable, so without that, rendering a timestamp would rewrite the model attribute as a side effect and anything comparing or saving it afterwards would be an hour or two out. Both Carbon classes get the same body — Carbon keeps macros in one global table, so the second registration replaces the first for every Carbon class, and two different bodies meant the immutable version, safe for itself, silently became the mutable one's implementation too. My own test caught that. The existing tests had not caught any of this because they built their expected values with the same wrong call the views used — a test that recomputes the implementation asserts nothing. They now assert the wall clock, and the queued update additionally asserts that the UTC time is NOT shown. Recorded as R19 in CLAUDE.md and enforced by tests/Feature/DisplayTimezoneTest: no Blade or Livewire component may format an absolute time without ->local(), the UTC no-op is banned, storage stays UTC, both sides of the DST boundary are checked, ->local() must not mutate, and a form field must round-trip to the same instant. APP_DISPLAY_TIMEZONE, default Europe/Vienna. 615 tests. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 17:32:21 +02:00
nexxo	435a202fdd	Match the panel to the approved template, measured rather than assumed ... The panel had been built by reading the template and believing the result. Every round of review found the same class of defect, so this round the template was rendered in a browser and measured with getComputedStyle, and the implementation measured the same way — two number columns instead of an opinion. That immediately settled a disagreement: a review of the template's SOURCE said the metric grid used a 20px gap. Rendered, it is 14px. The measurement wins. Brought to the template's figures: label 11.5px (it was 11px in three separate places, which is how it drifted — it is now one .lbl rule), value tracking -0.02em, unit weight 450, metric row 6px above and 14px between, page head centred with a 14px gap, grid gap 14px, columns switching at 1101/561px and the h1 at 901px to match the template's own breakpoints, ring 62px, bar 5px. The shared button now takes its height from min-height (40px) rather than vertical padding, at 14px/600 with 0 18px padding and a 10px radius — a button keeps its height whatever sits inside it, icon, spinner or bare text. Also here, from the same round of review: - The chart's blue border was Tailwind's own `ring` utility colliding with a component class of the same name. Renamed to `.metric-ring`. This was dismissed once as a screenshot artefact; it was real. - Page titles lost the `sm:text-3xl` (40px) an earlier bulk edit had appended to 23 of them. The template's h1 is 30px. - The users table has its actions back — edit, suspend, lock and delete — for every seat that is not the owner, with the owner refused in the action itself and not merely hidden in the markup. DemoCustomerSeeder writes one complete customer as real rows: instance, subscription, six seats across four roles, a backup, current-period traffic and thirty days of samples with a deliberate wobble and one day at 286/288 checks. Nothing in the panel is drawn from a fixture any more, so anything missing shows up as missing. Removing the demo is one deletion. Verified: 607 tests, and a Codex comparison of the two measurement sets — "a person would call them the same design", the only difference a 1px gap. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 17:08:05 +02:00
nexxo	85fcc154b8	Measure availability, and let a customer move down again ... Availability is now counted from our own monitoring answers. Uptime Kuma knows the figure, but the REST bridge in front of it only answers "healthy, yes or no", and waiting for the bridge to grow an endpoint would have left the panel without the number indefinitely. The sync already asks on a schedule; counting the answers gives a percentage that is ours and explainable. An unanswered check is not a failed one — the counter only moves when a real answer arrived, so our monitoring going down does not become the customer's outage on the one figure they are asked to trust. An instance nobody has ever checked shows no availability rather than 100 %. The downgrade path existed nowhere. Going down is not the mirror of going up: it can ask an instance to hold more than the target plan allows. Smaller plans are now listed even when they cannot be taken, with the obstacle in the customer's own numbers — "you have 31 users, this package allows 10" — because a greyed-out button that does not name what is in the way is the thing people ring about. Storage is checked against the last real reading rather than the contractual allowance, or anyone who once bought a large plan could never leave it. The limit is re-checked in the action: a rule enforced only in markup is not enforced. And the smaller corrections from this round: - The cloud tab carried a hardcoded "B" as the instance's initial, and the PHP and MariaDB versions, which tell a tenant nothing they can act on. - "EU — Serverstandort im Angebot festgehalten" under a label already reading "Serverstandort" was two sentences saying nothing. It is the country. - Support promised a reply "binnen 4 Std." with nothing behind it. What is true everywhere else is an answer on the same working day. - The actions column appeared even when no row in the table had an action. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:41:15 +02:00
nexxo	ee5e92c0ed	Measure what the template draws ... The panel could not show the storage ring or the transfer trend because nothing measured them. instance_traffic keeps one row per billing period — right for an allowance, useless as a series — and storage consumption was never sampled at all, so the card could only ever state what was sold rather than what is used. instance_metrics holds one row per instance per day, written by the traffic collector on the visit it already makes. A second scheduler entry against the same Proxmox API would have doubled the load and the failure modes for no gain. Disk usage comes from `df` inside the guest rather than from Proxmox's own disk figure, which reports the allocated image: that would show every customer a full 500 GB from their first day. The rule the whole thing is built on: a reading that could not be taken is not a reading of zero. The disk columns are nullable and left untouched when the guest agent does not answer, so yesterday's figure stands instead of the ring dropping to empty — which would tell a customer their data had vanished. Missing days stay missing in the series rather than being filled with zeroes, which would draw an outage that never happened. Both are covered by tests. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:29:28 +02:00
nexxo	c2a56382e1	Build the dashboard cards to the template, and name what has no source ... Card by card against the approved template: label with a chevron, the figure and its unit on one line, a line of context underneath, a bar across the foot. The order matches too — storage, seats, transfer, then the fourth slot. Three of the template's four visuals have no data behind them, and the code now says so where someone will read it rather than leaving the next person to wonder why the charts are missing: - Storage consumption is never sampled. The card states the contractually agreed allowance instead of drawing a ring at an invented level. - instance_traffic keeps one row per period, not a daily series, so there is nothing to draw a sparkline from. The share of the allowance is real, so that card carries a bar. - monitoring_targets records a state and a check time but no uptime figure, so there is no availability percentage to show. That slot carries the last backup — the thing this product is about and can actually prove. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:21:27 +02:00
nexxo	676c38643c	Follow the approved template, and stop showing invented records ... The dashboard was built to my own idea of the layout rather than to the template that was signed off: a coloured pill where the template has a stamped mono line, bare figures where it has a label with a chevron, a unit on its own line instead of beside the number, and no ring at all. There is no point agreeing a design and then building something adjacent to it. The metric card is now a component that draws the template's form, and the pages use it. Two more places were still showing data that does not exist: - Support listed three tickets to every customer, complete with reference numbers and dates. There is no ticket model; it was fixture text. A request list also belongs in the console, where an operator can see who filed what. Removed until there is something real behind it. - The datacentre name reached the customer through the cloud tab's copy as well. Customer surfaces name the jurisdiction; the building is operator information. And the actions column rendered an empty cell for the owner, who can be neither re-invited nor revoked. An empty cell reads as a missing feature; it now says so with a dash and a title. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:17:06 +02:00
nexxo	21d8dc310a	One definition of the navigation, and the country instead of the building ... The breadcrumb said Übersicht on every page. The sidebar and the breadcrumb each built their own copy of the structure, so the layout had no way to know which entry was current and fell back to the first one. Navigation::portal() and ::console() are now the single definition, and currentLabel() matches on the route name — which matters for the console, whose PATH changes between host-bound and fallback mode while its route names do not. The datacentre name is out of everything a customer sees, for the third time and now at the source rather than in a template. Falkenstein is how an operator places an instance; a customer's processing record names the jurisdiction, and putting the building in customer copy means editing that copy every time the estate grows. Also swept the views onto the new scale: --text-faint is 2.8:1 and a decoration token, but it was carrying table headers, hints and timestamps — text people have to read. All of it moved to --muted, which is 5.0:1 and passes AA. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:09:39 +02:00