25 Commits (v1.3.2)

Author	SHA1	Message	Date
nexxo	15b536f393	Mint the archive collection key from the console instead of by hand ... Setting a NAS up to collect the invoice archive meant three machines and a dozen commands: generate a keypair there, carry the public half to the server, write it into authorized_keys with a restriction, install rsync, and get every path right on the first try. Every one of those steps was a place to be told "permission denied" with no clue which of the three was wrong. It was, and several times over. One button now. The panel asks, the host does it — because the host is where all of it lives: the home directory, ssh-keygen, rrsync, and the archive itself. The panel is www-data in a container and owns none of that, so it uses the mailbox it already uses for updates. The private half is shown exactly once, alongside the finished rsync command, and is never written to the database: it exists to be copied into a NAS, and storing it "for convenience" would put a working credential in every backup of that database. rrsync does the restricting, not a pinned rsync option string. That string differs between rsync versions and fails silently — a refusal with no reason given, which is the shape of the afternoon this replaces. If rrsync is missing the agent refuses rather than issuing an unrestricted key while the panel says it is restricted. rsync now comes with install-agent.sh, which already runs as root once per machine. It has to be on the HOST: a NAS connects by ssh and sshd starts `rsync --server` here, so without it the pull fails with "command not found" from a NAS whose own setup is perfectly correct. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 10:08:32 +02:00
nexxo	132be7fdd5	Leave the archive readable by whoever collects from it ... Reported as "the folder arrives empty". It was not empty. The folder was 0700 and owned by the account that wrote it, so the account that COLLECTS — an rsync over ssh, a backup agent, anything that is not the writer — could not enter it, and an unreadable directory looks exactly like an empty one. The invoice had been sitting in it the whole time. The cause is that the default follows the process umask, so under a restrictive one 0755 quietly becomes 0700. The permissions are declared on the disk now rather than left to inherit, and a test writes under umask 0077 and asserts the mode — the ordinary umask hides this completely, which is why it was found on a server and not here. Two mistakes of mine on the way to it, both worth recording. I read the folder as the wrong user, got no entries back, and concluded the file had been deleted — it was a permission failure reading as an unprivileged account, not a missing file. And the first fix was a chmod on a variable that does not exist in that method, silenced by an @ so it failed without a word. Flysystem takes its permissions from configuration; a chmod afterwards was the wrong layer even before it was the wrong variable. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 03:48:03 +02:00
nexxo	d8ff717cb5	Let a destination say how it is laid out and how long anything stays ... Two destinations doing two jobs. A handover directory a NAS collects from wants a folder per day and wants emptying — thirty days is enough to notice a NAS that stopped collecting, and keeping more only hides it. An archive on the NAS itself wants a folder per year and wants nothing deleted, ever. So both are per destination rather than global. Deleting is safe here in a way it usually is not, and that is worth saying plainly: the invoice is a frozen document in the database and its PDF is rendered from that on demand. Nothing is moved anywhere — it is copied, and anything removed from a directory can be produced again and re-exported. The directory is a handover point, not the record. keep_days is null by default and stays null unless somebody sets it: a retention rule nobody asked for is a deletion nobody expected. The prune only touches folders whose NAME is one of the two shapes this application writes, and leaves everything else alone — a prune that deletes what it does not recognise is how an archive loses something nobody was watching. It also skips a destination whose path is missing rather than acting on whatever is underneath an absent mountpoint. The shape is matched with a pattern before parsing rather than by handing nonsense to Carbon: under strict mode createFromFormat throws instead of returning false, so one folder somebody made by hand would have ended the whole prune instead of being skipped. The test with a foreign folder in it found that. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 03:08:27 +02:00
nexxo	f0ec2fe03f	Keep the SFTP credential on the row it belongs to, encrypted ... The first version put it in the credential vault. The vault refuses it, and correctly: it keeps a registry of fixed, documented credentials so the Secrets page can describe each one, and a per-destination password is not that. Forcing a dynamic key into that registry would have made the registry meaningless. Encrypted onto the row with the same cipher instead — the same key, so it is no more readable in a database dump than anything the vault holds, and it lives with the record it describes. A rotated SECRETS_KEY now says so by name rather than surfacing as an authentication failure against a host that is perfectly fine. Also answers the question that prompted this: the host, port and user fields are there, and appear once SFTP is chosen. A mounted directory has no host on purpose — the mount is made on the server with mount(8), and the application only names the directory it writes into. A test asserts both halves, because "the fields are there, you just cannot see them yet" is not something anybody should have to take on trust. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:46:06 +02:00
nexxo	b3081a544b	Let the export have as many destinations as somebody wants ... One path and one exported_at could not say "on the office NAS, not yet on the off-site box" — which is the only interesting question once there is more than one destination, and the reason for a second is precisely that any single one can fail. A row per destination now, and a row per (invoice, destination) pair. Two kinds, and the difference is where the protocol lives. 'local' is a directory this machine can already write to: a NAS mounted over NFS 4.1, a bind mount, a disk. The application knows nothing about the protocol, the target changes without code changing with it, and the whole thing stays testable against a temporary directory. 'sftp' is for something reachable with credentials — a Hetzner Storage Box being the obvious one — and the password goes into the secret vault with only its key on the row, because a credential in a settings table is a credential in every database dump. An empty password field on an existing target means unchanged, not cleared: the field cannot show what is stored, so blank-means-delete would wipe it on every unrelated edit. One job per pair rather than one per invoice. A job writing to both would retry the one that worked every time the other did not, and report one outcome for two different things. The ordering fix the tests found: Laravel's local adapter creates its root when it is CONSTRUCTED, so the "never create the root" guard was checking a directory the disk had just made for it. It runs before the disk is built now. That guard is the difference between an archive and a hole in the ground — mkdir on an absent mountpoint succeeds, writes onto the container's own disk and reports success, and an archive that silently is not the archive is worse than none. The single path from the previous commit is migrated into a destination called "Archiv" rather than dropped. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:43:15 +02:00
nexxo	ab4b0311d4	Copy every invoice to the archive when it is issued, and notice when that fails ... The application knows nothing about NFS and should not. It writes to a directory; whether that is a local disk, a bind mount or a NAS over NFS 4.1 belongs to the mount. No protocol library, the target changes without code changing with it, and the whole thing is testable against a temp directory. The finding that shaped it: mkdir -p on a path whose mount is NOT there succeeds. It creates the empty directory beneath the mountpoint, writes the invoice onto the container's own disk and reports success — so an unmounted NAS would quietly collect invoices locally while every check said it worked. An archive that silently is not the archive is worse than none. The root is therefore never created, only used: a missing root means a missing mount, and that is a failure. Only the year subdirectory is created, inside a root already proven to exist. Written to a .part and renamed. A rename within one filesystem is atomic, so whatever watches that folder never sees a truncated PDF and takes it for a finished invoice. The size is read back afterwards rather than the write being trusted: over a network mount a short write can report success, and an archive of truncated files looks exactly like one that worked. Queued, not done during the request. A network mount can block for its whole timeout, and an invoice must not fail to be issued because a NAS is rebooting. Dispatched after the commit, or a worker could look for an invoice that has not landed yet. And copy-on-issue is not enough on its own: an invoice issued while the office connection was down never arrives, the queue eventually gives up, and nobody opens an archive to check whether last Tuesday is in it. An hourly sweep re-queues whatever is still missing, the failure is recorded on the invoice rather than only in a log, and the Finance page says how many are outstanding. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:32:08 +02:00
nexxo	86bf4f26e0	List issued invoices in the console, with no way to change one ... Read-only by design, and the absence is the feature: an issued invoice is corrected by cancelling it and issuing another, which is the only lawful way to correct one. There is no edit button here whose absence needs explaining, and a test asserts there is none. The PDF is a plain route rather than a Livewire action. A download is a download, and routing one through a component round-trip only adds a way for it to fail. Two findings on the way, and both were mine. The year filter used YEAR() in raw SQL, which is MySQL's. SQLite has no such function, so the page worked against the real database and threw against the test one — a query that only runs on one engine makes the test database a different product from the one being shipped. The years are derived in PHP now. And a test put a User on the operator guard, where EnsureAdmin calls isActive() on it and a 403 becomes a 500. Not a code defect: actingAs() calls Auth::shouldUse(), so a second actingAs() in the same test with no guard named lands on whichever guard the FIRST one named. That trap is written up in CLAUDE.md, I quoted it earlier today, and I walked into it anyway. The tests are split now and both name their guard. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:21:15 +02:00
nexxo	92bcdcd186	Send the invoice with the invoice attached ... The PDF is rendered when the mail goes out rather than fetched from anywhere, because nothing stores it — and rendering from the frozen snapshot means the attachment is the document as issued no matter when the queue gets to it or how often it retries. fromData rather than fromPath: there is no path. Three attempts at testing it, and the first two were wrong in ways worth recording. Attachment::$data does not exist — the closure lives in a protected $resolver, and reaching for it was me testing the framework's internals rather than my own code. And a byte comparison of the PDF cannot work at all: TCPDF embeds a creation time and a document id, so two renders of one invoice differ. Split into the two things that can actually go wrong. The mail carries an attachment with the right filename and type — that is metadata, and it is asserted as metadata. And the renderer produces a real PDF rather than an empty one, asserted where the renderer is, because an attachment closure that returns nothing still makes a perfectly valid mail with a nought-byte file on it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:13:41 +02:00
nexxo	cd54212b34	Issue an invoice from what somebody bought, and freeze it there ... One invoice per purchase rather than per order: a customer who buys a plan and two add-ons in one go has bought once, and three invoices for one purchase is three times the paperwork for the same money. Each order becomes a line, which is also how the add-ons get listed individually. Everything the document says is copied into the snapshot at the moment the number is assigned — issuer, recipient, lines, rate, the reason for the rate. A test changes the company name and the customer name afterwards and asserts the invoice still says what it said. That is the whole reason no PDF is stored. The number and the invoice commit in one transaction. A number taken and then lost to a failure is a gap in a series that must not have one, and the refusal test asserts that a rejected invoice leaves the counter where it was. It refuses outright until the company details are complete. An invoice without a registered name, an address or a VAT number is not a valid invoice here, and issuing one consumes a number that can never be handed out again. VAT comes from TaxTreatment, which already existed and already handles a verified EU VAT ID correctly — including the reverse-charge note, without which a zero-rated invoice says nothing about why no VAT was charged. The billing address is carried as the lines it was written as. It is one free-text field today, and guessing which line is the postcode would put it where the street belongs, on a document nobody can correct afterwards. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:09:05 +02:00
nexxo	3fb7e5f08c	Decide the VAT rate in one place, before the two disagree ... The Finance tab wrote a rate into settings while TaxTreatment kept reading one from config — two sources for one number, added by me two commits ago. It had not bitten yet only because both happened to say 20. TaxTreatment now takes the domestic rate from CompanyProfile, which falls back to the .env-derived config until an operator saves one. Same shape as ProvisioningSettings, which already solves this for the deployment values, and the same reason: an operator can change a settings page and cannot change a config value, so a page that appears to set the rate and does not is worse than no page at all. Reverse charge and the seller country stay where they are. That logic already existed, already handles a verified EU VAT ID correctly, and nothing here needed to know about it — which is exactly why it should not have been duplicated. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:03:29 +02:00
nexxo	4646880b90	Print every line at full price and take the discount off once, in euros ... Second correction to the same block, and this one came from the right place: a line reading 202,50 beside "Rabatt 10 %" does not say whether the discount is in that number or still to come. It was unreadable, and unreadable on the one figure a customer checks. Lines are at full price now. Discounts are still entered per line — that is where they belong and where somebody decides them — but they are summed and shown once, in euros, under a subtotal that the "Gesamt netto" column adds up to. Subtotal, one subtraction, VAT, total: a sum anybody can follow without being told which figures are already adjusted. The gross line-total column is gone and a gross UNIT price takes its place. Full-price gross totals would sum to 315,60 against a total of 288,60 — the same contradiction in a different column. Nobody adds up unit prices, and a consumer reading this wants to know what one of the things costs. lineTotal() and adjustmentLabel() went with it. Nothing calls them any more, and a helper kept for a layout that no longer exists is the next person's wrong turn. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:59:56 +02:00
nexxo	d21e4f0eb2	Put a discount on the line it belongs to, so the columns add up ... With one discount applied under the table, the gross column summed to 315,60 against a total of 284,04. Nothing was miscalculated — the discount simply came after — but a reader who adds up a column found a document that does not agree with itself, and no way to tell which figure was the real one. On an invoice that is not a presentation detail. A discount or surcharge now sits on its line, percentage or fixed amount, and is inside that line's total. The label under the line is built from the same value that did the arithmetic, so the words cannot end up describing a different number than the one printed beside them. The invoice-wide adjustment stays in the arithmetic for anything that genuinely applies to the whole document, but nothing uses it by default. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:52:16 +02:00
nexxo	c1896e70fc	Render an invoice, with the arithmetic held to integer cents ... TCPDF 6, deliberately, after installing 7 and finding out what it is. Version 7 is not a newer TCPDF; it is a compatibility shim over tc-lib-pdf whose own mapping table lists 115 of 293 methods as stubs, and whose font package ships no font files at all — the first render died on a missing helvetica.json. The 6.x line carries a hundred and sixty-five fonts, a working writeHTML and real header and footer hooks, and is what everybody means by TCPDF. The body is a Blade template handed to writeHTML rather than a hundred Cell() calls with millimetre coordinates, because this table has to be adjusted the first time somebody sees it on paper, and nobody adjusts the second kind. InvoiceMath is integer cents end to end, and rounds once. A percentage applied line by line and rounded each time drifts from the same percentage applied to the sum — three lines at 3,33 € less 10 % is 99 cents that way and 100 cents the honest way, and the customer's calculator is what finds it. Gross is always derived from net and never the reverse: taking VAT back out of a gross figure returns a different number often enough to matter. A discount and a surcharge are one operation with opposite signs, so nothing has to remember which of two flags means which. Quantities are thousandths, because hours, gigabytes and part-months are all real, and are printed with the trailing zeroes stripped — "12,000 Std." reads as a defect. Every line shows quantity, unit price net, total net AND total gross: this goes to businesses and to consumers, and each reads a different column first. Verifying it took two goes and both failures were mine. `strings` over a PDF set in a Unicode font finds nothing, because the text is stored as subset glyph ids — the check has to render in a core font to be a check at all. And two of the strings I then declared missing were simply expectations I had got wrong. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:41:46 +02:00
nexxo	e6d2e6dc33	Give the console a Finance tab: company details, VAT rate, invoice series ... Its own tab rather than a section of Settings, as asked. What is set here appears on a legal document, and burying it beside the site-visibility switch invites somebody to change one in passing. Everything the printed invoice needs — registered name, address, Firmenbuch number and court, VAT ID, bank details, payment terms, logo — with the logo replaceable, because a company changes its mark. None of it reaches an invoice that already exists: the values are copied into each document when its number is assigned, so a corrected address is correct from the next one onwards and cannot rewrite an old one. The console refuses to consider itself ready while a name, an address or a VAT number is missing, and says which. An invoice without them is not a valid invoice in Austria, and issuing one is worse than refusing to. The series editor carries the same shape as EditDatacenter and for the same reason. The prefix is free while the series is empty and frozen once a document carries it: changing RE to AR renames nothing and leaves a series whose past says RE and whose future says AR, with no record they belong together. The counter may be raised — an operator migrating from another system needs exactly that — but never lowered, because a lower number is one already printed on a document somebody holds. Both rules are recomputed from the database on save rather than read back from the properties the browser returns. CompanyProfile drops keys that are not part of the profile. It is fed from a form, and a forged key must not be able to write an arbitrary setting into the same table the site-visibility switch lives in. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:18:43 +02:00
nexxo	735daf46a4	Lay the foundation for self-issued invoices: series, numbers, frozen documents ... An invoice is a tax document, so two things drive the shape of this. It is frozen at issue. Everything the finished document says — issuer address, VAT number, bank details, customer address, every line, the rate, the totals — is copied into the invoice row when the number is assigned. The PDF is rendered from that and never stored, which is what was asked for; rendering it from today's settings instead would have been simpler and wrong, because an address changed in 2028 would rewrite an invoice from 2026. The width of this table IS the feature. Numbers are gapless and ascending, which is a legal requirement rather than a preference, and that is why none of it is derived from the invoices table. "Highest number plus one" hands the same number to two sales that land together and hands a used number back out after a row is removed — a number already printed on a document somebody holds. The counter is a column, read and advanced under a row lock inside the caller's transaction, and taking one outside a transaction throws rather than quietly working. Four Rechnungskreise seeded — Rechnung, Gutschrift, Storno, Anzahlung — each with its own prefix and its own counter, because a credit note is not an invoice with a minus sign in front of it. Seeded rather than left to the operator: an installation with no series cannot issue anything, and discovering that at the first sale is the worst possible moment. TCPDF added, for the renderer that comes next. There is deliberately no test for the outside-a-transaction guard, and a note where it would have been: RefreshDatabase opens a transaction around every test, so the guard cannot fire and a green test for it would be green for a reason that has nothing to do with the guard. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 00:57:06 +02:00
nexxo	8c3a79e258	fix(billing): hold only what cannot be matched, and let migrations roll back ... Two findings from reviewing all five phases together rather than one at a time. The webhook held every event a handler answered `null` to — but `null` also means "already recorded" and "deliberately skipped", which is every checkout's own invoice and every redelivered renewal. Their contract is right there, so `replayHeldFor()` could never come back for them, and ordinary Stripe traffic silted up the holding area until the weekly prune. It now holds only what it genuinely cannot match — and if the contract appeared in the meantime, applies the event instead of dropping it: the creation race is narrow, but losing a cancellation to it would leave us serving someone who had left. Also fixes a rollback that predates this work and blocks `migrate:fresh` on MariaDB entirely: dropping the unique index on customers.user_id fails while the foreign key added one migration earlier still depends on it. Verified by building all 33 migrations from nothing on MariaDB, rolling every one of them back, and building them again. 458 tests green. Codex clean on the full branch diff. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-26 13:57:11 +02:00
nexxo	0560ae743d	feat(billing): Stripe owns the billing cycle, we own capability ... A Product per plan family and a Price per priced row of a published version, plus the four subscribed webhook events that were arriving and being ignored. `stripe:sync-catalogue` mirrors the catalogue. Idempotent twice over: a stored id is skipped, and each call carries an idempotency key derived from our own row, so a crash between Stripe creating a Price and us recording its id gives back the same object rather than a second one. That matters more here than usual — a Stripe Price cannot be edited or deleted, so a duplicate is permanent. Drafts are not synced at all: a version that has promised nothing has no business in a price list. --dry-run shows what would be created. The webhook now handles invoice.paid, invoice.payment_failed, customer.subscription.updated and customer.subscription.deleted. It never re-derives an amount: the invoice is the authority for what was charged, and recomputing it from our catalogue would produce a second, disagreeing answer. A failed payment is recorded and nothing else — Stripe runs the dunning schedule, and cutting a customer off on the first failure would punish an expired card as though it were a refusal to pay. Only a cycle renewal moves the term on. Stripe also sends paid invoices for prorations and manual charges, and the checkout's own invoice — which is already in the register as the purchase, and would otherwise double every customer's first payment. Stripe does not guarantee delivery order, which is the source of most of the care here: - state changes are judged and written in one transaction with the row held, so two deliveries cannot both pass a check made on a stale copy; - an older event never overwrites a newer one, with a rank breaking ties between events sharing a second — their timestamps have one-second resolution, and a failed attempt and its successful retry routinely do; - a term is never shortened, and an ended contract is never revived; - an event for a contract that does not exist yet is HELD and replayed the moment it appears, rather than acknowledged and forgotten. A cancellation dropped that way would leave us serving someone who had already left. Held rows that never match are pruned after a week. Register entries are keyed by what they are about — the invoice, the attempt, the subscription — with a unique index doing the work, because a check two concurrent deliveries can both pass is not idempotency. PlanChange is now documented as the preview shown before someone confirms, not the invoice: Stripe's proration accounts for tax, existing credit and the exact second the change lands, and ours cannot. Not run against the live account — `stripe:sync-catalogue` creates objects that cannot be deleted, so that is the owner's call. The dry run lists 12. 457 tests green. Codex review clean after seven rounds. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-26 13:36:28 +02:00
nexxo	7582df3de6	feat(billing): a proof register, and modules frozen at their booked price ... Two things the contract could not answer on its own: what happened, and what the customer's whole bill is. `subscription_records` is append-only, one row per commercial event. Flat columns for everything searched or relied on as evidence — event, customer, subscription, plan family and version, term, net/tax/gross, currency, tax rate, reverse charge, Stripe ids — PLUS a versioned JSON copy of the whole snapshot. Not JSON alone: you cannot query it, and "the amount is in there somewhere" is poor evidence. Copied, not joined, so a row still answers after the customer, the plan or the version have gone. The flat columns describe the TRANSACTION. Gross is what was actually taken; net and tax are that gross split by the rate that applied on the day. A discount lowers the taxable amount rather than creating negative VAT, and a free checkout is recorded as free instead of as paid in full. What was agreed sits beside it in the snapshot, so a charge that differs from the catalogue is preserved as a question rather than reconciled away. The register refuses to be rewritten, in bulk as well as one row at a time — model events do not fire for `query()->update()`, which is exactly the shape a careless data fix takes. `subscription_addons` carries the owner's rule: a customer's total is their subscription plus their modules, and all of it is frozen at what was agreed. Price protection covering only the plan would let a module quietly double for someone who booked it two years ago. A module they have NOT booked is a sale still to be made, at today's price — so the catalogue is consulted only for what is not in this table. Several bookings of one module are summed rather than reduced to one arbitrary row, or the page and the bill would disagree. Concurrency: one order books one module, enforced by a unique index rather than a lookup two retries can both pass; cancellation is an atomic claim; and each booking commits with its own register entry, so a failure cannot leave a sale without evidence and a retry that finds the booking cannot skip the event. Verified in the browser: with the module raised from 29,00 € to 59,00 € in the catalogue, the customer who booked it still sees 29,00 € and a total of 208,00 €, while a new customer is quoted 59,00 €. 436 tests green. Codex review clean after seven rounds. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-26 13:07:34 +02:00
nexxo	f6ddf45dc0	feat(admin): a console for creating, pricing and scheduling plans ... The owner can now do from the console what only a config edit could do before: create a plan line, draft a version, price it, publish it into a window, and pull a plan out of the shop. Two pages and one modal, because the catalogue has exactly two levels. The plan list is a name, a rank and a kill switch. Everything that can be got wrong — capabilities, prices, windows — lives on the versions, where the page is built around the one rule that matters: a draft is freely editable, a published version is not touchable at all. So drafting and publishing are separate acts, and publishing says plainly that it is final. The console refuses everything the catalogue refuses, on the form rather than as a stack trace: an overlapping window, a window that ends before it starts, a version with no price for a term we sell on, and — new here — a version with no VM template, which would be bought and then fail provisioning every time. Numbers are bounded on both sides, because a mistyped price otherwise overflows the column and answers with a 500 instead of saying which field was wrong. Performance class and features are picked from the keys we have labels for; free text would be frozen at publication and shown to customers as a raw translation key forever. Concurrency, since two admins share one catalogue: draft numbers are allocated under a lock on the family, publication is an atomic conditional claim, and discarding a draft is one statement conditional on it still being a draft — otherwise a draft published in the meantime could be deleted out from under the customers now contracted to it. `plans.manage` (Owner and Admin) guards the pages themselves, not only the buttons, and the modal authorises itself — prices, drafts and unreleased plans are not something to leave readable to anyone who types the URL. Also fixes the shared checkbox, which ticked in the browser's own blue on every page that used one: a native checkbox ignores text colour and needs accent-color. Verified in the browser: withdrawing a plan in the console removes it from the customer's billing page immediately, and restoring it brings it back. The public landing page carries no catalogue-driven plan list, so there is nothing there to hide. 421 tests green. Codex review clean after six rounds. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-26 12:41:51 +02:00
nexxo	6387c747d0	feat(billing): the plan catalogue becomes three tables, and config stops selling ... Plans lived in config/provisioning.php, where the owner cannot reach them and where a plan has no history. They now live in plan_families / plan_versions / plan_prices — a name that never moves, what the plan WAS at a point in time, and a price per version and term with its own Stripe Price id. - Availability is computed on every read (available_from <= now < until, half-open, UTC) plus a per-family sales kill switch. Nothing schedules a plan into or out of sale: a job that fails to run is a plan that silently misbehaves. - Overlaps crash rather than resolve. currentVersion() uses sole(), and scheduling takes a lock on the family and rejects an overlapping window — two versions on sale at once would decide a customer's price by row order. - A version is frozen from publication, not from first sale, and so is its price: a checkout is not instant, and an amount edited between the session opening and the webhook landing would contract someone at a price they were never quoted. Repricing publishes a new version, as Stripe requires anyway. - Neither a published version, its price, nor a family with customers can be deleted, and a family key cannot be renamed. All of those would null the provenance off existing contracts. - Subscriptions and orders record plan_version_id. A historical reference resolved by plan NAME hands back today's terms, which is the split-brain one level up. A checkout that carried its version is honoured even after the window closes — they paid for what they were shown. Switched atomically and failing closed: config('provisioning.plans') and plan_features are gone, and nothing falls back to them. A fallback would resurrect a plan the owner had just switched off. The seed lives in the migration, and PlanCatalogueTest pins what the config catalogue sold as the shadow comparison. `php artisan plans:check` reports overlaps, gaps and missing prices before a customer finds them. Contract-backed displays, which were reading the live catalogue: seat limits, the cloud card, the plan card, and admin MRR — the last three now divide a yearly contract down via Subscription::monthlyPriceCents(), since all three label the figure per month. Two recovery gaps closed along the way: the order now commits before the contract is opened (so a contract failure can never erase the record of a payment), a Stripe retry repairs a missing contract and restarts a run stranded with no_subscription, and TickProvisioning sweeps runs left pending by a crash rather than only running/waiting ones. 402 tests green. Codex review clean after thirteen rounds. Verified in the browser: portal, billing and console render unchanged off the new catalogue. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-26 12:05:56 +02:00
nexxo	6119044669	fix(billing): no plan changes after cancellation, no unknown terms ... A cancelled subscription still reported an upgrade as allowed and priced it, so a caller trusting that would have provisioned and billed a customer who had already left. And any term string other than the two we support was silently priced monthly while keeping the unknown value — a subscription whose price and billing period disagree. Both are refused now. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 09:57:53 +02:00
nexxo	35324b986a	fix(billing): no free upgrade in the last hours of a term ... Flooring the remaining time made an upgrade with under a day left cost nothing, and an upgrade requested after the period had ended cost nothing while being applied immediately — the bigger plan for free. Remaining time now rounds up while any service is left, and an expired period defers the change to the next term instead of pricing it at zero. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 09:55:53 +02:00
nexxo	52b1acbb80	fix(billing): a scheduled downgrade must be applicable, and never cost money ... Once the term is over, the downgrade has to be allowed — otherwise the job that is supposed to carry it out never can, and the change waits forever for a date that has already passed. And a grandfathered plan can be cheaper than the smaller plan costs today, which made the goodwill credit negative: an invoice for the privilege of downgrading. Clamped to zero. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 09:54:16 +02:00
nexxo	460fac01b1	fix(billing): upgrade or downgrade is decided by rank, not by price ... With grandfathered prices the comparison inverts: a business plan bought when it cost less than today's team plan would have treated a move to team as an upgrade — charged immediately, while the customer loses resources. The plan's rank is frozen with the rest of the snapshot and decides the direction; prices only decide the amount. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 09:52:28 +02:00
nexxo	ac250071cb	feat(billing): immutable subscription snapshots and pro-rata plan changes ... The plan catalogue describes what we sell today; a customer who signed up last year bought last year's terms. Every commercially relevant condition — price, quotas, seats, the hardware behind the plan — is now frozen onto a subscription at signup, and the model refuses to let any of it be rewritten afterwards. A price rise applies to new subscriptions and cannot reach back into an existing contract. PlanChange holds the two rules, computed against the frozen price rather than today's catalogue: - Upgrading is immediate and pro rata: the new plan for the days left in the paid term, minus what the old plan was worth over those same days. On the last day of a month that is one day's difference, not a month's. - Downgrading waits for the end of the term. A yearly customer bought a year and can move down when it is up; a month is a month. A mid-term downgrade is a goodwill decision, not a self-service button, and its credit covers only the unused part of the difference. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 09:49:48 +02:00