151 Commits (v1.3.21)

Author	SHA1	Message	Date
nexxo	34874adec3	Apply a bought plan change instead of only pricing it ... PlanChange could say what a move would cost and whether it was allowed, and that was all it could do. Billing::purchase() wrote an upgrade order and nothing ever consumed it: same snapshot, same machine, same quota. A customer could pay for a bigger package and receive nothing. ApplyPlanChange is now the single place a change lands — it moves the contract onto the target's current version, writes one register row, settles the custom domain, and starts a run that resizes the machine. Applying the same order twice is a no-op, enforced by a unique event key rather than by a check two callers could both pass. Two things a plan change must not do, and now does not. A disk is never shrunk — Proxmox cannot, so the QUOTA shrinks instead, which is what was sold anyway. And a live machine is never rebooted as a side effect: cores and RAM are written, and where they need a restart the instance says so where an operator and the customer can both see it. The storage allowance also joins the build pipeline. ApplyStorageQuota was written for plan changes and ran only there, so a brand-new customer still got no quota at all — quota_gb reached the instance row and stopped, and every package delivered the whole disk. The test guarding that pipeline only counted its steps, which is how a list missing the one step that makes a package's storage real stayed green for its whole life. It now names the step. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 17:18:55 +02:00
nexxo	d5b2612e24	Always name the host we are being served from, and stop promising a duration ... ── Why the domain list looked wrong ───────────────────────────────────────── Reported three times, and it was not only the setting. The list came from `admin_access.site_hosts` and the instance zone — and where SITE_HOST is not configured, site_hosts is EMPTY. So an installation reached by a name nobody wrote into the config listed ONLY the instance zone, and described it as the customers' domain: the page a visitor opened to check our addresses omitted the address they had just typed, and named the wrong thing as ours. The host serving the request is now always in the list. It is the one address that is true by construction and needs no configuration to be right. (The zone itself is still one setting, and it is now clupilot.cloud on this machine. On another installation it is Konsole → Integrationen → DNS-Zone.) ── The clock ──────────────────────────────────────────────────────────────── "Eine Zeit angeben geht nicht — wenn es fertig ist, ist es fertig." Correct, and it was claimed three times over: an eyebrow saying "In 20 Minuten betriebsbereit", a provisioning log with minute marks down the side, and a closing line repeating it. A run waits on a hypervisor, on a certificate authority and on DNS propagating. A customer who once waits forty minutes has been told something untrue by their supplier, and the page cannot take it back. What replaces it is what actually IS promised and kept: the order of the steps, ticked off, numbered 1/5 to 5/5 — and then the sentence that answers the real question behind "how long", which is not a number but "do I have to sit here": you get an email with the address and the credentials when it is ready. The same claim is gone from the hero meta ("< 20 Min." → "automatisch"), from the figure line ("20 Minuten bis zum Betrieb" → "0 Termine bis zum Start") and from the FAQ, which now says outright that we do not name a duration and why. Kept deliberately: the 45-minute training session and the three-to-seven working days for setup. Those are appointments we schedule and commitments we control, not predictions about a machine. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 17:10:06 +02:00
nexxo	3a4324fb6f	Give people a way back in, and put the URL in English ... ── The hole ──────────────────────────────────────────────────────────────── There was no password reset. Fortify's feature was commented out, so there was no link on the sign-in form, no page and no route — a customer who forgot their password was locked out of their own cloud until somebody opened a shell. On a product whose selling point is that you can ring somebody, that is a support call a week and an embarrassing one. Two pages of ours under Fortify's route names (R1/R2), because with views off Fortify registers only the POST endpoints. The mail is a Mailable in this product's design rather than the framework's MailMessage: somebody who has just been locked out is exactly the person a phishing mail is aimed at, and a message that looks nothing like the rest of our post is one they cannot check — ours carries the footer that names our domains. Three decisions worth stating, each with a test: The answer is identical whether the address is known or not. "No account with that address" turns the form into a way of finding out who is a customer. The reset kills every other session. Whoever knew the old password may still be signed in somewhere, and a reset that leaves them there has fixed nothing. It does NOT sign the visitor in. The link arrived by email, and a mailbox somebody else can read would otherwise be a session somebody else gets. ── /sicherheit → /security ───────────────────────────────────────────────── R13: paths are English. Mine was not. The old path stays as a permanent redirect because it has already gone out in mail footers. ── One wordmark ──────────────────────────────────────────────────────────── "Sometimes it says Cloud and sometimes it does not" — correct. It was on the footer, the placeholder and the maintenance screen, and absent from the header, the sidebar and the sign-in plate. The product is called CluPilot Cloud; that is the name on the invoices and in every mail, so it is now the name everywhere. The console sidebar takes the small size so the lockup, the ADMIN badge and the close button still share one line (R18). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 16:50:29 +02:00
nexxo	712803edd6	Serve the custom domain, not just announce it ... A verified custom domain was reported as the customer's address by Instance::address(), by the portal and by the credentials mail while nothing on the platform routed it: the Traefik router's rule was hard-coded to {subdomain}.{zone}. The address a customer was handed answered nothing, and a withdrawn domain stayed in Nextcloud's trusted_domains forever, because the only thing that ever wrote either was the initial provisioning run. - TraefikWriter::write() takes a LIST of hostnames under one stable router name — the platform address always, the verified domain as well when there is one. One file per instance, so a withdrawal is a rewrite rather than a second thing somebody has to remember. - ConfigureDnsAndTls records the custom domain's certificate instead of waiting on it: it depends on an A record in the customer's own zone, which may never appear, and must never fail a run. The platform address keeps its 840s deadline. instances.domain_cert_ok tells "proven" apart from "answering", and the portal now says which. - ConfigureNextcloud deletes trusted_domains 2 when there is no verified domain, so a withdrawn one stops being trusted. - New `address` pipeline (those two steps) plus ReapplyInstanceAddress, which starts one against the order and refuses to start a second while any run is in flight. The route is rewritten when the hostname list differs from what the router carries — not on route_written, which would short-circuit exactly the case a re-apply exists for. - Triggered where the address changes: verification flipping either way in clupilot:verify-domains, the customer's own domain page, and CustomDomainAccess::deactivate() on a package downgrade. - A maintenance run no longer condemns its subject: an address run that failed used to mark the order failed and release the live instance with it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 16:44:52 +02:00
nexxo	085b110e7f	Link the phishing page from the section people look in ... Reported: "I cannot find that under Sicherheit on the website." Fair — the page was linked from the site footer, from every mail footer and from under the sign-in form, and none of those is where somebody goes when the thought "is this really them?" occurs. They go to the section called Sicherheit. It is now the last thing in that section, as its own card: what the page is for, in one line, and where it leads. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 16:30:29 +02:00
nexxo	6ef9b510ce	Merge branch 'feat/plan-reopen' ... # Conflicts: # app/Http/Controllers/LandingController.php	2026-07-29 16:20:07 +02:00
nexxo	f8874f32ea	Put customer instances on their own domain, and say which domains are ours ... ── The zone ──────────────────────────────────────────────────────────────── A fresh install now addresses customer instances under clupilot.cloud rather than clupilot.com. Not branding: a Nextcloud is third-party software that strangers sign in to, and on the same registrable domain as the portal it shares cookie scope, document.domain and CAA with it. The same reason googleusercontent.com and vercel.app exist. Existing installations keep whatever the console says — the zone has been a setting all along. `clupilot:check-zone <zone>` reports what a change would touch before anything is touched: the DNS records, the monitoring targets, the certificates and Nextcloud's trusted_domains all carry the old name and the setting reaches none of them. With no instances in service it says so and stops. Changing it later is a migration with an outage, and the command says that too. ── Which addresses are ours ──────────────────────────────────────────────── A new public page at /sicherheit: the domains that belong to us, the rule for reading an address bar, what we never do, and — the part that matters — what to do if you have already typed your password into a copy of our sign-in form. Change it, end every other session, change it wherever else you use it, tell us. In that order. Reachable without an account, deliberately: somebody who has just given their password away is signed in nowhere, and the page they need cannot be behind the thing they lost. Linked from the three places a person is when the question comes up: every mail footer (the mail is the vector), the sign-in form (this is the page a phishing kit copies, so the real one says which host you are on), and the site footer. The domain list is DERIVED from configuration and keyed by what each domain is for. A list typed into a page would eventually tell a customer that a phishing domain is one of ours, or that one of ours is not — the same two-sources-of-truth failure that had the price sheet promising an address on a domain the company does not own. The operator console is deliberately absent from it: naming it on a public page tells an attacker where to aim. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 16:03:13 +02:00
nexxo	b3651a14be	Decide who may have their own domain, and decide it in one place ... The domain page shipped with no access control at all: the `custom_domain` plan feature was checked nowhere in the codebase, and every customer on every package could point a domain at their instance. This is the owner's rule, built as one authority that everything else asks. Start impossible — not bookable, not upgradable, not offered Team optional, via the `custom_domain` module Business included, because the plan version carries the feature Enterprise included, likewise App\Services\Billing\CustomDomainAccess answers all of it: may this contract use one, may it book the module, why not in words a customer can be shown, what a downgrade would do to a domain they have, and — after a change lands — making the state match. Read against the FROZEN plan version, never today's catalogue, so a feature added to a package later cannot reach into a contract signed before it. Which packages cannot have one at all is an explicit list in config/provisioning.php, beside the module's price. The catalogue cannot answer it: plan versions model what a package HAS, and nothing models what a package may BUY. Both available proxies are dishonest — "the lowest tier on sale" hands the right to a grandfathered Start customer the day the owner stops selling Start or adds something cheaper below it, and reading it off `branding` would sell a domain to anyone allowed to upload a logo. The config comment says so. Enforced where it can be enforced today: - BookAddon refuses the module, with the sentence the customer is shown. GrantAddon now writes its synthetic order inside the transaction, so a refusal cannot leave a paid order for a module nobody got. - The portal drops the card where it cannot be booked and shows it as included where the package carries it — no price, no button. - Billing::purchase() re-checks, because a hidden button is markup. - DowngradeCheck reports the consequence beside the blockers, so the customer reads it above the button rather than after it: losing the domain (Team -> Start), or the choice (Business -> Team, where keeping it means booking the module). - PlanChange::settleCustomDomain() applies it once a change lands: the module stops being charged for and the instance goes back to its platform address. It clears the whole domain, not only the verified flag — clupilot:verify-domains re-reads every row that still has a domain and a token, and would switch it back on the next night. - The price sheet's own-domain row now reads dash / optional + price / included, from the same authority; the three cell states already existed and the view is unchanged. STILL TO APPLY, ONCE THIS AND THE CUSTOM-DOMAIN BRANCH MEET — one line at the top of App\Livewire\CustomDomain::mount(), which belongs to the other session and is deliberately untouched here: abort_unless(app(\App\Services\Billing\CustomDomainAccess::class)->allowsCustomer($this->customer()), 403); routes/web.php is left alone for the same reason. The mount() guard covers the route and the component both; a middleware would only repeat it. Follow-ups, named rather than built: - Nothing applies a plan change anywhere yet, so settleCustomDomain() has no caller. Whoever builds that must call it after the new contract opens, and must decide whether a booked module is carried onto the new contract — enforce() cancels the booking on the contract it is given. - Deactivation sets the state; it does not re-run provisioning. Traefik and Nextcloud's trusted_domains still name the old address until ConfigureDnsAndTls / ConfigureNextcloud run again. - App\Support\Navigation still shows the Domain tab to every customer; it can ask allowsCustomer() the same way. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 15:59:04 +02:00
nexxo	a4626d2569	Stop root workers breaking every page, and let the panel be closed ... ── The 500 ───────────────────────────────────────────────────────────────── "touch(): Utime failed: Operation not permitted", from BladeCompiler, on every request for the affected view. Blade compiles a view and then touch()es the compiled file to the source's mtime. touch() with an explicit time needs ownership of the file. A compose service without `user:` runs as ROOT — and queue, scheduler and reverb had none — so the first worker to render a view wrote a root-owned compiled file that the web process, as www-data, could never refresh again. The queue is what renders mails, which is why this surfaced now. queue, reverb and scheduler run as www-data. queue-provisioning stays root and says why: it brings wg0 up and runs `wg set` for every peer change, which needs NET_ADMIN on the running process. It renders no mail. And update.sh normalises ownership at the END of a run as well as at the start. The first call heals what a previous run left; the second heals what this one made — `git checkout` rewrites the tree as the service account while the old build is still serving. ── The panel that would not go away ───────────────────────────────────────── The same 500 is why it kept coming back: every poll failed, the watcher treats a failed request as "still restarting" (which it normally is), and the overlay stayed up over a console nobody could then reach to find out why. A restart is seconds. After two minutes of nothing the panel now says so and offers a way out — for an operator only, behind the same flag as the step and the log, so a customer on the 503 page is not shown a button suggesting they can call the deployment off. A successful answer clears it again: one bad minute must not leave a "something is wrong" notice sitting there for the rest of the run. Not an always-present close button. The deployment does not stop because somebody dismissed a panel, and offering that at the wrong moment is a lie. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 15:43:54 +02:00
nexxo	da76a260fb	Give the settings page an outline ... Reported as cramped boxes with empty space either side, and it was: one column half the window wide, eight cards of identical weight stacked in an order nobody chose — the operator's own password sitting between two platform-wide switches — and every card taking a full row to hold three lines of text. The page is wider now and has three groups, each with a heading: what belongs to the installation, what belongs to the signed-in operator, and the team. Short cards sit side by side instead of one per row. The two-factor policy moved into the installation group, where it belongs: it is a rule for everybody who signs in, set by the owner, not a setting on one account — and it fills the space the short website card was leaving beside the long allow-list. Fields are sized to what goes in them. The three password boxes were laid out three across inside a narrow card; they stack in a half-width one. The window times are four characters and were as wide as their column. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 15:29:07 +02:00
nexxo	517606b4db	Split the price sheet into what everyone gets, what differs, and what costs extra ... One boolean matrix was carrying three different kinds of statement, and it made all three unreadable. Updates, backup and monitoring were a tick in every column — a comparison that compares nothing — and the same promises were repeated in a prose line under the table. They are now stated once, above it, together with the platform address in the shape a customer will actually type (ihrefirma.<zone>, from the configured zone) rather than as the phrase "eigene Subdomain", which said nothing and was modelled as though an own domain replaced it. Provisioning issues both. Support was two independent booleans on one axis, so enterprise — which carries the SLA and not the priority flag — rendered "Bevorzugter Support —" beside team's tick: the top plan looking worse than the middle one. It is one row of levels now, and a plan with neither shows Standard, because standard support is a level and not an absence. A cell had two states, so a dash meant both "you cannot have this" and "you can have this for nine euros". There are three now, and the middle one quotes AddonCatalogue — which is also how the modules we have been selling all along finally appear on the page at all. Nothing is invented: where we sell no module for a missing feature, the cell stays a dash. custom_domain joins the module list at the owner's figure so the two plans without it can be quoted a price instead of told no. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 15:25:20 +02:00
nexxo	6c92aa5dd7	Let an incident be deleted, and start measuring whether the hosts answer ... Three things, all from trying to actually use the incident page. ── Where the later entries go ─────────────────────────────────────────────── The form only ever creates the first one, and nothing said so — so it looked as though the stage had to be chosen up front and there was only a dropdown for the impact. The field now says what it becomes ("wird untersucht") and where the rest are added: on the incident itself, once it exists. ── Deleting ──────────────────────────────────────────────────────────────── Asked for in order to test the thing at all, and right. A whole incident can now be removed, with its entries, behind a confirmation in the product's own dialog (R23). Deliberately not the same as editing an entry, which there is still no way to do: an update is a statement made at a time, and rewriting one afterwards is what the record exists to prevent. Removing the whole incident is a different act — it is how a test entry, or one published against the wrong service, is taken back, and it leaves nothing half-standing behind. A test holds that distinction so the delete button does not quietly become an exception to it. ── The hosts, which nothing was watching ──────────────────────────────────── `hosts.last_seen_at` drove the health dot in the console and was written exactly once, at onboarding — RegisterCapacity stamped it and that was the only write in the codebase. So every host read "offline" thirty minutes after it was added, permanently, and the dot meant nothing. It is also why host reachability could not appear on the status page: it was never being measured. PingHosts asks every host's API the cheapest question it answers, once a minute, and stamps the timestamp on success. Failure writes nothing on purpose: absence IS the signal, and a second column counting failures would be a second version of the same fact. The status page has a fifth component for it. Counts only — never a host name, never an address; the page is world-readable and the estate is not public information. A host between five and thirty minutes silent reads as degraded, not as healthy: "stale" is one of three answers healthState() gives and it is not the good one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 15:16:48 +02:00
nexxo	0e3c50d9a1	Update on a schedule if the owner wants one, and say where incidents go ... ── Where the status page gets its data ────────────────────────────────────── Asked in as many words, and fairly: the page for maintaining incidents exists (console → Betrieb → Störungen) and nothing anywhere said so. The page now carries the answer at the top — what is written there appears publicly at once, the four components measure themselves, and there is a link straight to the live status page. ── Automatic updates, inside a window, switchable ─────────────────────────── Tick it and name the days and hours; leave it alone and nothing changes. The button stays either way: manual is always possible, at any hour. It leaves exactly the same request the button leaves — same file, same agent, same run. A second path into a deployment would be a second set of rules to keep in step with the first, and the automation must not be able to do what an operator is prevented from doing by hand: it checks the same three things the button is disabled by (agent alive, something released, nothing running). Nothing guards against having already updated by hand, and nothing needs to: an installation that is current has nothing available, so pressing the button at four leaves the five o'clock window with nothing to do. That was the owner's own question and it answers itself. Defaults are Tuesday to Thursday, 05:00–06:00. Not Monday — the week starts and every fault costs double. Not Friday — nobody wants to repair a deployment on a Friday afternoon. Not three in the morning: if it goes wrong, the person who has to fix it is asleep. A window whose end is before its start wraps past midnight, because 23:00 to 02:00 is a reasonable thing to ask for and reading it as an empty range would silently mean "never". Switched on with no weekday selected is refused rather than corrected — it is a configuration that reads as working and does nothing. The clock is the wall clock (R19): an operator who writes 05:00 means five in the morning where they live, and a window that drifts by an hour twice a year is a window nobody trusts. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 15:01:54 +02:00
nexxo	d4e8822dbb	Paketversionen: Verkauf wieder aufnehmen und saubere Übergabe ... Eine geschlossene Version konnte nie wieder in den Verkauf. Schlimmer: um ein Paket zu ändern, musste die laufende Version zuerst beendet werden — und wenn die Nachfolgerin dann nicht sofort veröffentlicht wurde, war das Paket dauerhaft dunkel. - PlanCatalogue::reopen() setzt available_until zurück auf null, über schedule(), damit Family-Lock und Überlappungsprüfung dieselben bleiben. Ein nie veröffentlichter Entwurf wird abgelehnt. - PlanCatalogue::publish() übergibt eine laufende Version an ihre Nachfolgerin (available_until = deren Start) statt die Überlappung abzulehnen — unter demselben Lock, in derselben Transaktion. Nur die unmittelbare Vorgängerin, und nur wenn es genau eine gibt. - Konsole: Knopf „Wieder verkaufen", übersetzte Ablehnung statt der englischen Ausnahme, und die Übergabe wird im Veröffentlichen-Formular vorher angekündigt (Version und Zeitpunkt, ->local()). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 14:58:11 +02:00
nexxo	ea643b5e73	Prove a custom domain before serving it, and keep proving it ... Two things. ── The update screen, still opening twice ─────────────────────────────────── Reported again on 1.3.9, and the cause was not the one fixed in 1.3.8. The agent consumes the request file BEFORE it resolves the release — deliberately, because update.sh may kill the shell and a request left in place would loop — and writes `state: running` only once it has decided to go ahead. In between, the request is gone and the status does not say running yet, so the endpoint honestly answers "nothing is running". The watcher read that as "the run has finished" and reloaded the page: overlay on the click, gone a poll later, 503 after it. The overlay now closes only once the server has BOTH confirmed a run and then stopped reporting it. Before the confirmation, silence means the agent has not got there yet. Bounded at twenty polls so a request the agent refuses does not leave the console covered forever. ── Custom domains, proven and re-proven ───────────────────────────────────── `custom_domain` was a free-text field and everything downstream believed it: the proxy served it, the certificate was issued for it, Nextcloud trusted it. Anyone who pointed any hostname at the platform got somebody else's files under their own name. The proof is a TXT record at _clupilot-challenge.<domain> holding a token only this instance has. Nothing is served until it has been read. Every reader now goes through Instance::address(), which is the one place the decision is made — `custom_domain ?: subdomain` was the hole, written out four times. It is re-read every night at 03:40, because a token checked once can be taken straight back out and a domain that later lapses keeps resolving here. Three consecutive misses before a live domain is withdrawn: one failed lookup is a nameserver having a bad minute, and withdrawing takes a working Nextcloud off its own address. The domain and its token stay on the row so the customer can put the record back rather than start over. Changing the domain mints a NEW token. Reusing it would let somebody who once verified example.com claim any other domain later without touching its DNS — the old record is still sitting there and only the value is compared. The domain is changeable at any time, and removable. Fixing it once set was considered and rejected: adding or moving an address is a proxy entry, a certificate and one line in trusted_domains. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 14:47:51 +02:00
nexxo	8c105c17d6	Move each plan's marketing copy from the controller into the console ... Audience line and note were LandingController::COPY, a hardcoded array keyed on exactly the four plan keys the seed migration created — a plan made under any other key rendered with no copy at all. They move onto the family for the same reason the recommendation mark does: they are a stance about the product line, not a capability that changes with a price, so they must not be frozen per version. Backfilled in the migration from the controller's own strings, so the public page prints exactly what it printed a moment ago. A family with no copy yet renders without the audience line rather than an empty gap. Feature labels (managed_updates, daily_backups, ...) stay in the controller: they name catalogue features, not individual plans, so there is no per-plan or per-version place to hang an editable customer-facing label without re-introducing a shared feature table. That table existed once and was deliberately removed when the plan catalogue closed its pricing split-brain; bringing it back for wording alone is a bigger, separate decision.	2026-07-29 14:31:44 +02:00
nexxo	17a6fabcc2	One wordmark, one typeface, and the address the server actually issues ... Reported as "logo and font are different everywhere" — maintenance page, customer panel, console, homepage. They were. Counting them up: the site header set the name in ink at -0.02em, the sidebar split it into "Clu" plus an orange "Pilot", the sign-in plate set it white at a third size, the customer two-factor page set it in MONO with no mark at all, the error pages and the placeholder each inlined their own — and the maintenance screen had no wordmark whatsoever. Nine surfaces, seven ideas of the brand. There is one now: resources/views/components/ui/brand.blade.php. Mark plus wordmark in one piece, in ink, with an optional muted "Cloud". No orange half — that made the accent a permanent fixture instead of something used sparingly. The four places that cannot use a Blade component (the two self-contained pages, the error layout, the mail layout) inline it and are held to the same shape by a test. The typeface. The console loads IBM Plex through Vite; the 503 page has no stylesheet at all, so the maintenance screen — the one page shown when somebody is already worried — was rendering in the system sans. It declares the fonts itself now. And the bold weight was missing from public/fonts entirely: the placeholder and the error pages both asked for ibm-plex-sans-latin-700-normal.woff2, which was not there. A @font-face pointing at nothing fails silently, which is why nobody noticed. The error pages carried the same two faults the placeholder shipped with: an empty gradient tile where the mark belongs, and `gap` on an inline-flex row spacing "Clu", "Pilot" and "Cloud" apart as three separate words. And the price sheet promised "Adresse auf clupilot.cloud" — a domain the company does not own — while provisioning was issuing addresses under whatever CLUPILOT_DNS_ZONE says. It is assembled from that setting now, the same reason the prices are read from the catalogue rather than typed into the page. welcome.blade.php removed: Laravel's leftover, reachable from no route. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 14:30:44 +02:00
nexxo	4ef5b9519c	Let the owner mark one plan as recommended, from the console ... Recommended lives on the plan family, not a version: it is a stance about the product line ("which plan we point a visitor towards"), not a capability that changes with a price, and freezing it per version would make the mark silently vanish every time a new version publishes. Setting a plan recommended clears whichever other plan carried the mark, inside one transaction locking the whole table — two operators recommending two different plans at once must not both win. The public price sheet already had the highlighted-card treatment for this (it was driven by a hardcoded "team" constant); it now reads the family instead.	2026-07-29 14:22:22 +02:00
nexxo	012d0f5092	Say EU, and stop promising to fix somebody else's deleted folder ... Two corrections from a read of the live pages. The location. Three public places named countries or a city — "aus deutschen und finnischen Rechenzentren" on the placeholder, "in Österreich und Deutschland" in the FAQ, "EU · Wien" in the product panel — and they did not even agree with each other. They all say EU now, which is the thing that is promised, the thing the AV-Vertrag pins down, and the thing that stays true when a host moves. The same string in the customer dashboard was worse: 'EU · Rechenzentrum Falkenstein' was hard-coded and shown to every customer whatever host their instance actually runs on. A specific claim nobody derived from the record. The closing headline asked who you call when a folder is missing on a Monday morning. It promised the wrong thing: what happens inside a customer's own Nextcloud is their own house — the recycle bin and the version history are right there — and presenting ourselves as the first call for somebody else's user error offers a service we do not run. It now asks who looks after updates, backups and outages, which is what the comparison section already says in the operator's own words and what the product is actually for. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 14:17:30 +02:00
nexxo	b843c10ec3	Give the update screen the product's colours, and only one window ... Two complaints, both correct, both mine. Dark blue. The panel carried a `prefers-color-scheme: dark` block — the only one in a product that has no dark mode. On a phone set to dark the update screen, and nothing else, turned dark blue. A dark mode for one page is not a dark mode; it is one page that does not match. It is gone. And even in daylight the panel was not this product's colours: it used Tailwind's slate ramp (#0f172a, #64748b, #e2e8f0), which is blue-tinted, against neutrals that are warm. Every value is now a copy of a token from portal-tokens.css, with the comment saying so, because this file cannot import them — it renders when the asset build may not exist. The small window then the big one. The settings card grew its own little "läuft gerade" block the instant a run started; up to three seconds later the full-page overlay covered it and said the same thing in a different size. The card no longer says it at all, and the overlay now opens on the button's own click — requestUpdate dispatches an event, but only once a run is actually pending, so a refused second press does not black out the console. Two more things found while looking: The panel had `min-height: 100%`, which resolves against the parent's height. On the 503 page the parent is <body>, whose height is auto — so it computed to zero, the panel was only as tall as its text, and the bottom two thirds of the screen stayed the browser's default white. Viewport units now, dvh so a phone's collapsing address bar leaves no strip either. And the mark was a plain orange tile again, the same empty-square that was just fixed on the placeholder. The real logo is inlined. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 14:11:01 +02:00
nexxo	4755a4f362	Redesign the pre-launch placeholder, and fix its wordmark and mark ... Reported from a phone on status.clupilot.com, which serves this page because the site is still switched to private. Two real defects behind the complaint: The wordmark read "Clu Pilot Cloud". `gap` on a flex container applies between EVERY child and a bare text node is a child — so an inline-flex row wrapped around "Clu", <i>Pilot</i> and " Cloud" put nine pixels between each of them. The wordmark is one element now and the gap only ever separates it from the mark. The logo was a plain gradient tile with nothing in it, which reads as an image that failed to load. That is a poor thing to leave somebody with on a page whose whole message is "we are building this properly". The real mark — cloud plus autopilot ascent — is inlined; it has to be in the file because this page renders when the asset build may not exist at all. The redesign itself: the card is gone. The page is now a centred composition on the open ground — the state as a pill above everything, the mark, the headline at the size the rest of the site uses, and the three promises the paragraph was already making set as their own line so there is something to look at besides one block of text. One warm bloom behind it, drawn as a gradient rather than a blurred disc, which banded into visible rings. Still self-contained, and still the only page exempt from the shared stylesheet: it is served mid-deploy and on a fresh install, where @vite would throw instead of rendering the reassurance somebody came for. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 13:43:56 +02:00
nexxo	b85df4c141	Rebuild the status page as a status page ... Asked for after looking at how real ones are built. The shape they all share is a convention, and a convention is what lets somebody find the answer without being taught the page: banner, components each with ninety days of uptime, then the written record underneath. This page had only the banner — the version that is of no use the morning after, because "Alle Dienste in Betrieb" is true and says nothing to somebody who was locked out the evening before. Three things are new. The ninety-day bar. It cannot be reconstructed after the fact: the monitoring table holds the last verdict per instance, not a history. So a sampler (clupilot:sample-status, every five minutes beside the monitoring sync) writes counts into one row per component per day, and the page divides them. A day with no row is drawn as a gap and says "nicht aufgezeichnet" — never green. Degraded samples count as reachable in the percentage but still colour the day: folding them into downtime reports a slow morning as an outage, ignoring them loses the only trace of it. The incident record. An operator reports a disruption in the console, posts updates as it develops, and the entry that says "behoben" is the same action that closes it — two separate steps is how a page ends up with a resolved note under an incident that still reports as ongoing. There is deliberately no way to edit an update: it is a statement made at a time, corrections are a further entry. An open incident may make a component look worse than the probes found it, never better. Scheduled maintenance, from the windows the console already keeps rather than a second list somebody has to remember to fill in. The measurement moved out of the controller into ServiceHealth, shared with the sampler, so the banner and the bars cannot disagree about what "healthy" means. The page now uses the shared design system and the site's header and footer. Its self-contained stylesheet was there to survive a broken asset build; it does not survive one — if the stylesheet cannot be served the application serving this page is already failing, and mid-deployment every route answers with the maintenance page. What the exemption bought was a third design nobody maintained. Found while building: durationMinutes had its operands the wrong way round, and diffInMinutes is signed, so the public page printed "Dauer -86 Minuten". Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 12:45:18 +02:00
nexxo	3b85e8f1d1	Grant a package or module from the customer's row in the console ... GrantPlan is a modal (R20), opened from a "Schenken" button on the customer's own row in Admin\Customers, gated by customers.grant_plan rather than merely hidden. It offers a whole package (plan, term, datacenter, an optional quota bonus baked into the frozen snapshot) or a module on an existing contract, either free or at a discount the operator sets against today's catalogue price. Existing grants show on the same modal — who gave what, when, and until when — with a warning once a dated grant is nearing its end; nothing lapses on its own, exactly as decided. The customers list also badges a granted plan in the Paket column.	2026-07-29 12:42:21 +02:00
nexxo	c71b2c362b	Skip the invoice for a full gift, keep it out of revenue, hide its price ... IssueInvoice now rejects free-grant orders before it will consume an invoice number for them — a full gift produces no invoice at all, while a discounted grant still charges something and is invoiced exactly like an ordinary sale. Keyed on the linked subscription/add-on's own provenance, not on the amount being zero, so a genuinely fully-discounted Stripe checkout is unaffected. Revenue excludes granted contracts from MRR/ARR/ARPU and the contracts count — a gift at 0 must not drag the average down — and shows their number as its own KPI instead of folding it in, since the owner measures himself on it. The portal (Cloud, Billing) shows a granted package or module without a price at all: not "free", not struck through, just the service, so a later conversion to paid does not read as a negotiation.	2026-07-29 12:41:32 +02:00
nexxo	696c8834b8	Redesign the public website instead of recolouring it ... Correctly rejected: the last pass was the old page in new paint. It kept the skeleton — eight numbered sections, a split hero, a twelve-row comparison matrix — and changed only the palette. A palette is not a design. What is actually different now: - The § numbering is gone. Numbered sections with a drawn rule are a document convention, and the document voice is exactly what the product's design system dropped. - The hero shows the product instead of describing it: centred type, then a wide panel built from the real console's own tokens, cropped by the section below. The old hero put a table of facts beside the headline, so a visitor read two columns before seeing anything. - Six identical cards, then six more, then six more became one asymmetric grid — a large panel, a dark tile, an accent tile, a wide module row — so the important thing is allowed to be bigger than the rest. - The industries are one dense two-column list instead of six cards repeating each other's shape. - The page has one dark hinge in the middle (the deployment) rather than a dark section among seven light ones. - The evidence table became rows that pair the measure with the piece of paper you can hand somebody, which is what it is for. - Prices are cards, with the full matrix folded away underneath. The matrix used to be the first thing a visitor met: twelve rows of ticks before a single price was legible. - The FAQ heading sits still while the questions scroll past it. - The footer is a real footer. The header is a floating bar rather than a full-width band, and opaque in both states — translucency plus backdrop-blur reads as a rendering fault over the dark panels that scroll under it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 11:43:25 +02:00
nexxo	43d58de7f8	Rebuild the public website in the shared design system ... Reported plainly: the site is still in the old style. It was — it was the last of the three surfaces the token file describes that had never been converted. landing.blade.php carried its own complete design system inside a <style> block: warm paper, IBM Plex Serif headlines, 3px corners, its own scale of greys, written before the tokens existed. Somebody who clicked "Anmelden" left one company and arrived at another. The page now draws from resources/css/portal-tokens.css like the portal and the console: same surfaces, same radii, same button hierarchy, same small-caps label, one family at weight 700 instead of a serif. What still differs is rhythm, which is what a marketing page is allowed to differ in. Content is unchanged. New: components/layouts/site.blade.php holds the header and footer for every public page, and legal.blade.php uses it too — the imprint used to be a stranded card in a third style again. Two things found on the way: - .lbl set `color: var(--muted)`, which is not a token. An undefined var() in `color` computes to `unset`, so every small-caps label on every surface was whatever colour its container happened to be. - The big figures were set in mono. Mono gives the decimal comma a full glyph cell, so "99,95" read as three separate numbers. coming-soon and the status page stay self-contained on purpose — both are served when the application may not have a built stylesheet at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 11:26:35 +02:00
nexxo	0671e8e119	Show one design while updating, not two swapping mid-run ... Reported from live: pressing update showed a blue panel first, which then vanished and was replaced by a completely different "we are updating" screen. Both were mine. The console drew its own overlay in the app's light tokens; a moment later the containers went down and Laravel's 503 page took over with its own standalone styling. One event, two faces, swapping while an operator watches. There is now one panel — resources/views/partials/updating-panel.blade.php — rendered by both. It carries its own inline CSS and cpu- prefixed class names because the 503 page is served with the application down: no compiled stylesheet, no Tailwind, nothing but what is in that file. Dark mode comes from prefers-color-scheme for the same reason. The operator detail (step, running since, log tail) rides inside the panel behind a flag, since the same file is shown to customers on the 503 page. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 10:20:40 +02:00
nexxo	15b536f393	Mint the archive collection key from the console instead of by hand ... Setting a NAS up to collect the invoice archive meant three machines and a dozen commands: generate a keypair there, carry the public half to the server, write it into authorized_keys with a restriction, install rsync, and get every path right on the first try. Every one of those steps was a place to be told "permission denied" with no clue which of the three was wrong. It was, and several times over. One button now. The panel asks, the host does it — because the host is where all of it lives: the home directory, ssh-keygen, rrsync, and the archive itself. The panel is www-data in a container and owns none of that, so it uses the mailbox it already uses for updates. The private half is shown exactly once, alongside the finished rsync command, and is never written to the database: it exists to be copied into a NAS, and storing it "for convenience" would put a working credential in every backup of that database. rrsync does the restricting, not a pinned rsync option string. That string differs between rsync versions and fails silently — a refusal with no reason given, which is the shape of the afternoon this replaces. If rrsync is missing the agent refuses rather than issuing an unrestricted key while the panel says it is restricted. rsync now comes with install-agent.sh, which already runs as root once per machine. It has to be on the HOST: a NAS connects by ssh and sshd starts `rsync --server` here, so without it the pull fails with "command not found" from a NAS whose own setup is perfectly correct. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 10:08:32 +02:00
nexxo	d8ff717cb5	Let a destination say how it is laid out and how long anything stays ... Two destinations doing two jobs. A handover directory a NAS collects from wants a folder per day and wants emptying — thirty days is enough to notice a NAS that stopped collecting, and keeping more only hides it. An archive on the NAS itself wants a folder per year and wants nothing deleted, ever. So both are per destination rather than global. Deleting is safe here in a way it usually is not, and that is worth saying plainly: the invoice is a frozen document in the database and its PDF is rendered from that on demand. Nothing is moved anywhere — it is copied, and anything removed from a directory can be produced again and re-exported. The directory is a handover point, not the record. keep_days is null by default and stays null unless somebody sets it: a retention rule nobody asked for is a deletion nobody expected. The prune only touches folders whose NAME is one of the two shapes this application writes, and leaves everything else alone — a prune that deletes what it does not recognise is how an archive loses something nobody was watching. It also skips a destination whose path is missing rather than acting on whatever is underneath an absent mountpoint. The shape is matched with a pattern before parsing rather than by handing nonsense to Carbon: under strict mode createFromFormat throws instead of returning false, so one folder somebody made by hand would have ended the whole prune instead of being skipped. The test with a foreign folder in it found that. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 03:08:27 +02:00
nexxo	0528b56a32	Name no vendor in the export settings ... A destination is a kind of connection, not a product. The wording said "Hetzner Storage Box" and the host field suggested one particular provider's hostname format, which reads as a requirement rather than an example — and the whole point of the directory kind is that whatever is behind it is nobody's business here. Both kinds stay. A directory is how an NFS 4.1 mount is used: the mount is made on the server, and the application writes into the path it produces. SFTP is for a destination that is not mounted. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:49:33 +02:00
nexxo	b3081a544b	Let the export have as many destinations as somebody wants ... One path and one exported_at could not say "on the office NAS, not yet on the off-site box" — which is the only interesting question once there is more than one destination, and the reason for a second is precisely that any single one can fail. A row per destination now, and a row per (invoice, destination) pair. Two kinds, and the difference is where the protocol lives. 'local' is a directory this machine can already write to: a NAS mounted over NFS 4.1, a bind mount, a disk. The application knows nothing about the protocol, the target changes without code changing with it, and the whole thing stays testable against a temporary directory. 'sftp' is for something reachable with credentials — a Hetzner Storage Box being the obvious one — and the password goes into the secret vault with only its key on the row, because a credential in a settings table is a credential in every database dump. An empty password field on an existing target means unchanged, not cleared: the field cannot show what is stored, so blank-means-delete would wipe it on every unrelated edit. One job per pair rather than one per invoice. A job writing to both would retry the one that worked every time the other did not, and report one outcome for two different things. The ordering fix the tests found: Laravel's local adapter creates its root when it is CONSTRUCTED, so the "never create the root" guard was checking a directory the disk had just made for it. It runs before the disk is built now. That guard is the difference between an archive and a hole in the ground — mkdir on an absent mountpoint succeeds, writes onto the container's own disk and reports success, and an archive that silently is not the archive is worse than none. The single path from the previous commit is migrated into a destination called "Archiv" rather than dropped. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:43:15 +02:00
nexxo	ab4b0311d4	Copy every invoice to the archive when it is issued, and notice when that fails ... The application knows nothing about NFS and should not. It writes to a directory; whether that is a local disk, a bind mount or a NAS over NFS 4.1 belongs to the mount. No protocol library, the target changes without code changing with it, and the whole thing is testable against a temp directory. The finding that shaped it: mkdir -p on a path whose mount is NOT there succeeds. It creates the empty directory beneath the mountpoint, writes the invoice onto the container's own disk and reports success — so an unmounted NAS would quietly collect invoices locally while every check said it worked. An archive that silently is not the archive is worse than none. The root is therefore never created, only used: a missing root means a missing mount, and that is a failure. Only the year subdirectory is created, inside a root already proven to exist. Written to a .part and renamed. A rename within one filesystem is atomic, so whatever watches that folder never sees a truncated PDF and takes it for a finished invoice. The size is read back afterwards rather than the write being trusted: over a network mount a short write can report success, and an archive of truncated files looks exactly like one that worked. Queued, not done during the request. A network mount can block for its whole timeout, and an invoice must not fail to be issued because a NAS is rebooting. Dispatched after the commit, or a worker could look for an invoice that has not landed yet. And copy-on-issue is not enough on its own: an invoice issued while the office connection was down never arrives, the queue eventually gives up, and nobody opens an archive to check whether last Tuesday is in it. An hourly sweep re-queues whatever is still missing, the failure is recorded on the invoice rather than only in a log, and the Finance page says how many are outstanding. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:32:08 +02:00
nexxo	33e5b15099	Restart the workers automatically after saving .env, instead of handing the operator back to the shell ... Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:26:34 +02:00
nexxo	86bf4f26e0	List issued invoices in the console, with no way to change one ... Read-only by design, and the absence is the feature: an issued invoice is corrected by cancelling it and issuing another, which is the only lawful way to correct one. There is no edit button here whose absence needs explaining, and a test asserts there is none. The PDF is a plain route rather than a Livewire action. A download is a download, and routing one through a component round-trip only adds a way for it to fail. Two findings on the way, and both were mine. The year filter used YEAR() in raw SQL, which is MySQL's. SQLite has no such function, so the page worked against the real database and threw against the test one — a query that only runs on one engine makes the test database a different product from the one being shipped. The years are derived in PHP now. And a test put a User on the operator guard, where EnsureAdmin calls isActive() on it and a 403 becomes a 500. Not a code defect: actingAs() calls Auth::shouldUse(), so a second actingAs() in the same test with no guard named lands on whichever guard the FIRST one named. That trap is written up in CLAUDE.md, I quoted it earlier today, and I walked into it anyway. The tests are split now and both name their guard. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:21:15 +02:00
nexxo	92bcdcd186	Send the invoice with the invoice attached ... The PDF is rendered when the mail goes out rather than fetched from anywhere, because nothing stores it — and rendering from the frozen snapshot means the attachment is the document as issued no matter when the queue gets to it or how often it retries. fromData rather than fromPath: there is no path. Three attempts at testing it, and the first two were wrong in ways worth recording. Attachment::$data does not exist — the closure lives in a protected $resolver, and reaching for it was me testing the framework's internals rather than my own code. And a byte comparison of the PDF cannot work at all: TCPDF embeds a creation time and a document id, so two renders of one invoice differ. Split into the two things that can actually go wrong. The mail carries an attachment with the right filename and type — that is metadata, and it is asserted as metadata. And the renderer produces a real PDF rather than an empty one, asserted where the renderer is, because an attachment closure that returns nothing still makes a perfectly valid mail with a nought-byte file on it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:13:41 +02:00
nexxo	cd54212b34	Issue an invoice from what somebody bought, and freeze it there ... One invoice per purchase rather than per order: a customer who buys a plan and two add-ons in one go has bought once, and three invoices for one purchase is three times the paperwork for the same money. Each order becomes a line, which is also how the add-ons get listed individually. Everything the document says is copied into the snapshot at the moment the number is assigned — issuer, recipient, lines, rate, the reason for the rate. A test changes the company name and the customer name afterwards and asserts the invoice still says what it said. That is the whole reason no PDF is stored. The number and the invoice commit in one transaction. A number taken and then lost to a failure is a gap in a series that must not have one, and the refusal test asserts that a rejected invoice leaves the counter where it was. It refuses outright until the company details are complete. An invoice without a registered name, an address or a VAT number is not a valid invoice here, and issuing one consumes a number that can never be handed out again. VAT comes from TaxTreatment, which already existed and already handles a verified EU VAT ID correctly — including the reverse-charge note, without which a zero-rated invoice says nothing about why no VAT was charged. The billing address is carried as the lines it was written as. It is one free-text field today, and guessing which line is the postcode would put it where the street belongs, on a document nobody can correct afterwards. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 02:09:05 +02:00
nexxo	4646880b90	Print every line at full price and take the discount off once, in euros ... Second correction to the same block, and this one came from the right place: a line reading 202,50 beside "Rabatt 10 %" does not say whether the discount is in that number or still to come. It was unreadable, and unreadable on the one figure a customer checks. Lines are at full price now. Discounts are still entered per line — that is where they belong and where somebody decides them — but they are summed and shown once, in euros, under a subtotal that the "Gesamt netto" column adds up to. Subtotal, one subtraction, VAT, total: a sum anybody can follow without being told which figures are already adjusted. The gross line-total column is gone and a gross UNIT price takes its place. Full-price gross totals would sum to 315,60 against a total of 288,60 — the same contradiction in a different column. Nobody adds up unit prices, and a consumer reading this wants to know what one of the things costs. lineTotal() and adjustmentLabel() went with it. Nothing calls them any more, and a helper kept for a layout that no longer exists is the next person's wrong turn. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:59:56 +02:00
nexxo	d21e4f0eb2	Put a discount on the line it belongs to, so the columns add up ... With one discount applied under the table, the gross column summed to 315,60 against a total of 284,04. Nothing was miscalculated — the discount simply came after — but a reader who adds up a column found a document that does not agree with itself, and no way to tell which figure was the real one. On an invoice that is not a presentation detail. A discount or surcharge now sits on its line, percentage or fixed amount, and is inside that line's total. The label under the line is built from the same value that did the arithmetic, so the words cannot end up describing a different number than the one printed beside them. The invoice-wide adjustment stays in the arithmetic for anything that genuinely applies to the whole document, but nothing uses it by default. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:52:16 +02:00
nexxo	90131f088a	Add a raw .env editor to the Integrations page, with a net under it ... Everything the console has no field for is still real — MAIL_*, DB_*, APP_KEY, whichever key nobody has built a form for yet — and without a way to touch it from here, the operator needs a shell and the console page misses its own point. EnvFileEditor is the net, not just the warning: 1. Validates before writing. A line that is neither blank, nor a comment, nor KEY=value is rejected outright, and an empty file (syntactically "valid" by that rule, but not survivable) is refused too. write() never touches the file before checking the new content. 2. Backs up before every write that actually happens — a timestamped copy beside .env, before the new content lands. Never pruned automatically; the page says so, next to where it says where they land. 3. Names the keys a mistake here can lock an operator out with — APP_KEY, DB_*, REDIS_*, SESSION_* — rather than a blanket warning nobody reads. 4. Gated by secrets.manage and the same confirmed password the vault entries use — this is the one place on the page that can reach every credential the vault otherwise keeps write-only. 5. Says plainly what saving does not do: queue, queue-provisioning, scheduler and reverb only read .env at their own startup, and names the restart command plus config:clear. 6. Marks which .env keys SecretVault currently overrides, so editing a line that a stored vault value already shadows does not look broken. Two issues surfaced by Codex review and fixed before this commit: the raw file content stayed in the Livewire component snapshot after the password confirmation window expired on its own (not only on an explicit re-lock), and the first save on an installation with no .env yet failed trying to back up a file that was never there. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:51:27 +02:00
nexxo	3fadaa14b0	Merge credentials and infrastructure into one Integrations page ... Zugangsdaten and Infrastruktur split the same subject by storage mechanism — SecretVault vs App\Support\Settings — instead of by what each field configures, which is not a distinction an operator setting up Stripe or DNS should have to know or care about. One page now, grouped by integration: Zahlungen (Stripe), DNS (Hetzner), Monitoring, VPN/WireGuard, SSH-Identität. A secret and a plain setting sit side by side within a section; the difference stays visible — a vault entry is write-only and shows only an outline, a setting shows its value in full — as a property of the field, not a reason for a separate page. Both storage mechanisms are unchanged underneath: this is a presentation change, not a data migration. The vault keeps its own gate (secrets.manage + a recently confirmed password); plain settings keep theirs (hosts.manage alone). Reachable with either capability, since the two are no longer two pages a role happens to see one, both, or neither of — every section and every save action still checks its own capability server-side. admin.secrets and admin.infrastructure redirect here permanently rather than 404ing a bookmark. The nav entry that replaces both is visible to either capability — Navigation's capability field now accepts an array meaning "any of these", not only a single ability. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:49:39 +02:00
nexxo	f8c923b48a	Stop the invoice printing my own indentation ... TCPDF takes leading whitespace in HTML literally, so every line of the address and every line description came out indented by however far the Blade template happened to be nested — and the one line that had no indentation, the VAT number, sat flush against the margin looking like the mistake. It was the only correct one. Also puts the title and the invoice number in one block. As an h1 with a paragraph beneath it, TCPDF gave the heading a margin of its own and the two drifted a centimetre apart. Found by rendering the page and looking at it, which is the only way any of this is ever found. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:45:55 +02:00
nexxo	c1896e70fc	Render an invoice, with the arithmetic held to integer cents ... TCPDF 6, deliberately, after installing 7 and finding out what it is. Version 7 is not a newer TCPDF; it is a compatibility shim over tc-lib-pdf whose own mapping table lists 115 of 293 methods as stubs, and whose font package ships no font files at all — the first render died on a missing helvetica.json. The 6.x line carries a hundred and sixty-five fonts, a working writeHTML and real header and footer hooks, and is what everybody means by TCPDF. The body is a Blade template handed to writeHTML rather than a hundred Cell() calls with millimetre coordinates, because this table has to be adjusted the first time somebody sees it on paper, and nobody adjusts the second kind. InvoiceMath is integer cents end to end, and rounds once. A percentage applied line by line and rounded each time drifts from the same percentage applied to the sum — three lines at 3,33 € less 10 % is 99 cents that way and 100 cents the honest way, and the customer's calculator is what finds it. Gross is always derived from net and never the reverse: taking VAT back out of a gross figure returns a different number often enough to matter. A discount and a surcharge are one operation with opposite signs, so nothing has to remember which of two flags means which. Quantities are thousandths, because hours, gigabytes and part-months are all real, and are printed with the trailing zeroes stripped — "12,000 Std." reads as a defect. Every line shows quantity, unit price net, total net AND total gross: this goes to businesses and to consumers, and each reads a different column first. Verifying it took two goes and both failures were mine. `strings` over a PDF set in a Unicode font finds nothing, because the text is stored as subset glyph ids — the check has to render in a core font to be a check at all. And two of the strings I then declared missing were simply expectations I had got wrong. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:41:46 +02:00
nexxo	77bd30ca56	Answer on every name for the website, and send them all to one ... SITE_HOST takes a comma-separated list now, the first name canonical. It serves the site; every other name in the list redirects there permanently, path and query intact. An apex domain and its www are two names for one thing, and answering on both without picking one splits search rankings and cookies between them. The redirect is a host-bound catch-all rather than middleware. Middleware that only some routes carry is the same half-measure this file already made once, and a catch-all registered without a host would swallow every path in the application — which is what the third test is there to stop. The test harness needed fixing too, and the fix is the finding. Router::dispatch on a standalone router does not rebind the container's request, so a route reading one — through the helper OR through an injected parameter, both of which resolve from the container — gets the test's request rather than the one being answered. The redirect silently lost its query string in the test while working in production. dispatchOn() binds it where the framework would. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:29:33 +02:00
nexxo	e6d2e6dc33	Give the console a Finance tab: company details, VAT rate, invoice series ... Its own tab rather than a section of Settings, as asked. What is set here appears on a legal document, and burying it beside the site-visibility switch invites somebody to change one in passing. Everything the printed invoice needs — registered name, address, Firmenbuch number and court, VAT ID, bank details, payment terms, logo — with the logo replaceable, because a company changes its mark. None of it reaches an invoice that already exists: the values are copied into each document when its number is assigned, so a corrected address is correct from the next one onwards and cannot rewrite an old one. The console refuses to consider itself ready while a name, an address or a VAT number is missing, and says which. An invoice without them is not a valid invoice in Austria, and issuing one is worse than refusing to. The series editor carries the same shape as EditDatacenter and for the same reason. The prefix is free while the series is empty and frozen once a document carries it: changing RE to AR renames nothing and leaves a series whose past says RE and whose future says AR, with no record they belong together. The counter may be raised — an operator migrating from another system needs exactly that — but never lowered, because a lower number is one already printed on a document somebody holds. Both rules are recomputed from the database on save rather than read back from the properties the browser returns. CompanyProfile drops keys that are not part of the profile. It is fed from a form, and a forged key must not be able to write an arbitrary setting into the same table the site-visibility switch lives in. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 01:18:43 +02:00
nexxo	864126ec7f	Add the SSH identity to the vault, and give deployment config a console page ... The SSH private key CluPilot deploys to every host is now stored through SecretVault (ssh.private_key), preferred over CLUPILOT_SSH_PRIVATE_KEY(_PATH) at all three real consumers — SshTraefikWriter and HostStep::keyLogin. kuma.password/kuma.totp stay in .env: they authenticate a separate Python container at boot, and nothing in this app reads them, so the vault would have nothing to wire them to. A new /admin/infrastructure page, backed by App\Support\ProvisioningSettings, makes the non-secret deployment settings that used to force a shell — DNS zone, WireGuard hub endpoint and public key, Traefik's dynamic-config path, the SSH public key, and the monitoring bridge URL — visible and editable from the console, each wired to every real consumer. WG subnet/hub IP and Kuma's own connection details stay in .env: the compose file and a separate container read those before this application ever does.	2026-07-29 00:52:44 +02:00
nexxo	7a5a71dc89	Read VPN host state from the synced peer table, not a live hub call	2026-07-29 00:18:21 +02:00
nexxo	b1ab0f7f31	Put every mail in one design, and confirm an order when the money arrives ... Four templates, one layout. Two of them — the maintenance announcement and its cancellation — still wore Laravel's markdown component, which brings its own logo, its own button and its own footer: the product was sending mail that looked like two different companies, one of which was the framework. New: an order confirmation, sent when the payment lands rather than when provisioning finishes. Those are minutes apart at best and can be much longer, and somebody who has just been charged and heard nothing assumes the worst about both the charge and the product. It deliberately promises no time for the cloud itself — provisioning takes what it takes, CloudReady announces the end, and a promised minute that slips is worse than no promise. Queued after the transaction, never inside it, and never allowed to fail the webhook: Stripe retries anything that is not a 2xx, and a retry would re-enter provisioning over a mail server having a bad minute. The finished-cloud mail now names what was actually built — address, plan, storage, location — because somebody who ordered a fortnight ago is checking it against what they bought, and that is a comparison rather than a sentence. Still no credential in it. Two tests earn their place. One holds every template on the shared layout, so a new one written in a hurry cannot copy-paste its way back to the framework's. The other proves the finished-cloud mail carries no password — asserted against the data the mail is given and the HTML it renders, not against the template's source, because the first version of that test tripped over the word in a comment and would have passed a template that leaked the value through a variable. It tested the prose, not the mail. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-29 00:14:04 +02:00
nexxo	eb743d34ed	Show WireGuard tunnel state per host in the hosts list	2026-07-29 00:10:15 +02:00
nexxo	5b8c28595a	Require a confirmed address before an account can use anything ... Registration opened an account that could sign in immediately on an address nobody had proved was theirs — and anybody can type a stranger's into a registration form. Both halves were commented out: the Fortify feature and MustVerifyEmail on the model. `verified` sits on the whole portal group rather than on the pages that spend money. An unconfirmed address is not a billing problem to be caught at checkout; it is an account that may not belong to the person holding it, and the servers, the users and the backups behind it are worth as much to whoever typed the address as to whoever owns it. The mail is a Mailable in this product's design rather than Laravel's notification, which would arrive with the framework's logo, button and footer as the first thing anybody ever receives from CluPilot. It also has to leave through the SYSTEM mailbox like every other account mail, which the notification path does not do on its own. The link is signed and expires, and the address is part of what is signed — so a link issued to a mistyped address stops working the moment the address is corrected, rather than confirming an address nobody can read. Tests cover the tampered link, the expired one, the corrected address, and one account trying to confirm another. The waiting page is ours (Fortify has views off) and offers the only two things that move somebody forward: send it again, or sign out and register with the address they meant. The resend is throttled, because otherwise it is a button that makes the server send mail to an arbitrary address as fast as it can be clicked. Somebody already confirmed is redirected away from it — the `verified` middleware only guards the other direction. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 23:43:20 +02:00
nexxo	07141a96bf	Show where an account is signed in, and let it sign the other places out ... Completes the device work: the warning mail now has somewhere to send people. A warning whose only advice is "if this was not you, take action" names a problem and hands back nothing to do about it. Both sides get their own component rather than one shared with the guard passed in. Operators and customers are two guards and two tables (R21) — a component taking the guard as input is one forged property away from listing and ending the other side's sessions. Every query in SessionRegistry is scoped by guard as well as by id for the same reason, and three tests hold that line, because the unscoped version looks exactly like a working feature while doing it. TouchLoginSession keeps each row pointing at the session it describes. Both sign-in paths raise the Login event BEFORE session()->regenerate(), so the row is written against an id that is dead a moment later — and the once-a-minute throttle would have held the correction back for the first minute of every session, hiding the session its reader is sitting in. A changed id is therefore never throttled. A session counts as live only if the framework's row exists AND was touched within the session lifetime. The join alone is not enough: Laravel collects expired sessions by lottery, so on a quiet installation rows sit there for days and the list would offer somebody a laptop they shut last month. Ending the others goes through the product's own modal (R23) and leaves the asking session alone: signing somebody out of the page they are using to sign other people out is not what the button says. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 23:38:17 +02:00