- The Traffic panel header ("Empfangen/Gesendet") drew from the sampled
throughput, which is 0 until the minutely sampler accrues deltas — so a peer
with live traffic (e.g. 244 B) showed "0 B" in the header. It now sums the
live per-peer rx/tx counters, so the header always matches the peer rows. The
chart below stays windowed throughput (fills from the sampler).
- import_hint reworded to state plainly that the WireGuard phone app ALWAYS
prompts for a tunnel name on a QR scan (app behaviour, not changeable); the
.conf download is the path to an automatic name (filename = tunnel name).
Tests: header sums live peer counters. 354 pass, Pint clean, /wireguard 200 with
no console errors, lang parity 89/89.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three things the operator asked for on the WireGuard page:
- DNS is no longer hardcoded to 1.1.1.1. New host action set-dns (_set_dns +
cmd_set_dns + write-bridge branch + WgBridge validation, IPv4 list only),
stored as WG_DNS in wg.env (appended for pre-existing tunnels), surfaced via
the collector + WgStatus, baked into new peer configs (DNS = ${WG_DNS:-1.1.1.1}).
Editable in the Server tab; e.g. point clients at your own gateway.
- The page is split into two independent tabs: "Peers" (list / add / remove /
traffic) and "Server configuration" (endpoint / DNS / port / subnet / gate /
SSH lock + server identity). #[Url] $tab makes it deep-linkable (?tab=server).
- Offline detection: ONLINE_WITHIN 180s -> 150s (PersistentKeepalive=25 keeps
active peers re-handshaking well within it, so no flapping; a disconnect now
shows offline ~2.5 min sooner). Endpoint hint clarified: the port is optional
(auto-appended), no need to repeat the listen port.
Tests: set-dns (write+audit, reject), tab switch/clamp, dns in status; the two
configured-render tests now switch to the server tab for server content. 353
pass, shellcheck clean, Pint clean, both tabs load 200 with no console errors,
lang parity 89/89.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- QR: 0.9.42 over-enlarged it; bring the show-once peer QR back to a balanced
~240px (still crispEdges on a white quiet-zone frame) so it scans on a phone
without dominating the modal.
- Download filename now becomes a useful tunnel name on import: build it from
the endpoint host + peer name (e.g. "10.10.90.165-laptop.conf") instead of the
generic "clusev-wireguard.conf" — WireGuard apps name a tunnel after the file.
A QR scan can't carry a name (the app prompts for one); the import hint now
explains both paths.
Tests: download-filename cases (host+peer, fallback); 349 pass, Pint clean,
/wireguard loads 200, lang parity 83/83.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The show-once peer config QR rendered at 176px (~2.7px per module) with
anti-aliasing on. A WireGuard config QR is dense (~57 modules), so a phone
camera misread it and the WireGuard app rejected the result as "keine gültige
WireGuard-Konfiguration". Render it large (up to ~300px) on a white framed
quiet zone with shape-rendering:crispEdges, so modules stay sharp and ~4.6px
each. The Download button (.conf import on a PC) remains as the alternative.
Verified: old-vs-new render comparison (2.7 → 4.6 px/module, crisp modules);
Tailwind compiles the arbitrary shape-rendering property; /wireguard loads 200
with no console errors.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Verified dead-code + duplication cleanup over the WireGuard feature surface
(found via an audit workflow, every item adversarially re-verified by grep):
Dead code removed:
- lang keys not_configured_title / not_configured_body (both locales) — orphaned
when the unconfigured empty state became the in-page setup form (setup_title /
setup_intro). 0 references anywhere. de/en parity kept (83/83).
- WgTraffic::series() 'buckets' return key — written, never read by blade/route/test.
- blade $fmtB byte-formatter — byte-identical duplicate of the top-level $fmtBytes
already in scope; collapsed onto $fmtBytes.
DRY / readability (behavior-preserving):
- Index: PEER_NAME_RE constant (was the same regex literal at 5 sites), portInRange()
+ clampWindow() helpers (window default now self::WINDOWS[0]), openConfirm() helper
(5 confirm-modal openers shared one dispatch), onFlag() helper (2 apply handlers).
- WgBridge: validPort() helper (port check was duplicated verbatim).
- clusev-wg.sh: _write_server_conf() shared by both setup paths (the byte-identical
server bring-up was copy-pasted); single CIDR_RE constant for the 3 subnet checks;
fixed a stale header comment that still claimed SSH is "NEVER matched" (the v0.9.40
ssh-lock can match 22); documented the defence-in-depth re-validation in _set_*.
- WgStatus: documented server.pubkey is part of the /wg-status.json contract (kept).
No DB/migration changes (peer_name write-only column left intact — needs a
coordinated migration). 348 tests pass, shellcheck clean, Pint clean, R12 verified
in both the configured + unconfigured states (200, no console errors, no leaked
keys, traffic formatter renders 1.5 MB / 200 KB correctly).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two dashboard additions to the WireGuard page:
- Peer config download: the show-once new-client view gets a "Download"
button next to the QR code (streams clusev-wireguard.conf) plus an
inline hint explaining QR-on-phone vs download-on-PC import.
- SSH lock (port 22): an optional toggle in WireGuard settings that walls
off host SSH to the tunnel via a dedicated CLUSEV-WG-SSH chain on the
host INPUT chain. Fail-open by construction: ESTABLISHED,RELATED + lo +
wg0 + WG-subnet RETURN before the DROP (live sessions survive, SSH over
the tunnel stays open); _ssh_gate_on refuses while wg0 is down; the boot
unit's ConditionPathExists=wg0 and an in-function self-guard keep a
broken tunnel from ever applying the DROP; ssh_gate_apply re-validates
the subnet shape and fails open on a corrupt wg.env. Strong lock-out
warning shown inline AND in the confirm modal (recommend a backup peer).
New CLI escapes: clusev wg ssh-lock / ssh-unlock; clusev wg down clears
both gates. Panel gate and SSH gate are independent toggles.
Write-bridge: new gate-ssh-on/gate-ssh-off actions (no args, host
whitelist + ConfirmToken wgSshGate, single-use uid-bound). Status collector
now reports gate.ssh. Adversarial lock-out review: all 8 failure modes
refuted. 348 tests pass, shellcheck clean, Pint clean, R12 verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Update-progress phases were a pure time guess, so a fast update sat on "fetch"
then snapped all four green at once. Now the host updater publishes its real
macro-stage and the page tracks it:
- update.sh / install.sh write the current stage (fetch|build|restart|migrate|
done) to run/update-phase.json — best-effort (|| true, never aborts an update).
- new public GET /update-status.json serves that stage (whitelisted) to the page.
- update-progress.blade.php drives the checklist from the feed in REAL order
(fetch → build → restart → migrate), falling back to the time heuristic when no
feed is present, and completes on the feed's 'done' (or the version flip, with a
25s grace fail-safe). Like the 502 fix, the live experience lands one update
after this ships (the page shown DURING an update is the old version's).
Also: Versions changelog series + page are now #[Url]-synced (?series=&page=),
so a series/page is shareable and survives reload / back-button.
Tests: /update-status.json (null / whitelisted / rejected stage), the page polls
the feed, and the changelog deep-link reads ?series=&page=.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the flat 48-item changelog list with a series browser: releases are
grouped by major.minor (e.g. "0.9"), a rail (vertical from xl, horizontal pills
below) selects the series, and the active series is paginated (8/page) with the
newest release open by default. The installed series is marked; each row shows
its change categories as toned glance-dots.
Also fixes, surfaced by an adversarial review of the change:
- icon: add the missing 'chevron-right' Lucide path — the accordion disclosure
caret and the pagination "Next" button were rendering an empty <svg>.
- blade: wire:ignore.self on each <details> so a user's open/closed toggle is not
reset by an unrelated re-render (autoCheck / check-updates / in-update poll); a
series/page change still re-defaults to first-open via a fresh wire:key.
- blade: 44px touch targets (series pills + pagination) below lg (R7).
- i18n: localised 'Other' series label; pluralised series_count (no "1 Releases").
- Index: render() is the single clamp authority for changelogPage.
Index.php: groupBySeries() + pageWindow() + selectSeries/gotoChangelogPage; render
builds the series list, resolves the active series, paginates. New DE+EN keys.
VersionsChangelogTest covers grouping order, default series, paging, clamp, the
installed-series cue, and the chevron-right icon regression.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The update-progress page declared completion on two consecutive 200s from
the /up health route. But the OLD container keeps answering /up 200
throughout the minutes-long rebuild, so the page redirected prematurely
back into the teardown → 502 / white screen.
Now the page polls a lightweight public /version.json probe and finishes
only when the running version has actually moved past the pre-update one
(passed as ?from=), or after an observed down→up cycle for a same-version
redeploy. The 10-minute timeout + manual-reload fallback are unchanged.
- routes/web.php: add public GET /version.json; sanitise+pass ?from= to the view
- Versions/Index.php: include the installed version as ?from= in the redirect
- update-progress.blade.php: version-gated completion (fromVersion/sawDown)
- UpdateProgressTest: probe endpoint, embedded baseline, from-sanitisation, no /up poll
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
When a server is active, the server name and IP status-pill are now clickable
links to that server's detail page using wire:navigate. When no server is active,
both display as plain text to maintain readability.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace three divergent 2FA indicator styles (cyan x-badge in users list,
custom inline-flex chip in settings header, plain mono text in sidebar) with a
single x-two-factor-badge component using the cyan x-badge + shield icon style
and the canonical settings.two_factor_on/off lang keys throughout.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- backup field: autocomplete=off -> one-time-code (backup codes ARE one-time codes;
matches the main challenge field, the rest of the app, and the spec; restores
password-manager OTP autofill that the earlier polish broke)
- both verify() use the trait's memoised $this->pendingUser() instead of a fresh
User::find(), saving a redundant query on the failed-attempt re-render (Pint dropped
the now-unused User import in TwoFactorBackup)
- spec: align trait backing-state visibility note to the implemented 'private'
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mount now redirects key-only users without a secure context straight to
the dedicated backup view. The main challenge form renders only for TOTP
users; a subordinate button links to two-factor.challenge.backup instead
of embedding the field inline.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
New /help full-page Livewire component with left topic nav (like Settings),
bilingual content via per-locale Blade partials, sidebar + command-palette
entries (g h). First topic: Überblick / Overview.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- reverbClient() now returns wss://<domain>:443 when the active domain is being
served (the HTTPS front door), instead of deriving wss://host:80 from a request
that looks like plain HTTP:80 behind an external TLS proxy. Bare-IP recovery
stays plain ws.
- Caddy no longer redirects the /app/* /apps/* WS paths to https when the upstream
already terminated TLS (X-Forwarded-Proto: https) — that redirect broke the
WebSocket in external-proxy mode.
- The 'TLS active' status card no longer claims Let's Encrypt issuance in
external-proxy mode; it states TLS is provided by the upstream proxy.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The available-update banner + button now appear automatically when the page
opens, instead of only after clicking 'check'. autoCheck() runs via wire:init
(async, non-render-blocking) and no-ops while an update is in progress so it
never clobbers the running/poll state.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Update progress now resolves: a wire:poll detects the rebuilt container
reporting a newer version than at request time, flips the card back to
'current' and fires a success toast (survives the restart downtime; times out
after ~5min instead of spinning; resumes after a reload while the sentinel
exists). Fixes the 'Update läuft' state that never ended.
- An available update shows on page load straight from the cached check (no
re-click, no network) instead of only after pressing 'check'.
- Displayed times follow the host timezone instead of UTC: app.timezone is now
env-driven and install.sh bakes APP_TIMEZONE from the host (DB stays UTC).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add a host-watcher-backed update button on Version & Releases. The container
(no Docker socket) writes an update sentinel; a new root-run systemd unit
(clusev-update.path/.service) runs watch.sh update -> update.sh (git pull +
idempotent install). The sentinel is consumed before running so a persistent
failure can't loop the path unit.
The button only appears once a check finds a newer release, is per-user
throttled (3/10min, auto-expiring) and audited (deploy.update_request); the UI
warns the dashboard is briefly down during the rebuild. install.sh now installs
both the restart and update host units (update unit runs as root for
docker/systemd/apt).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The command-palette opened itself full-screen and undismissable right after
first login on production (bare-IP) installs. Root cause: app.js constructed
`window.Echo = new Echo({...})` at module top level. On auth-layout pages the
runtime reverb config (window.__clusev) is absent and the prod bundle bakes no
VITE_REVERB_* fallback (by design — the endpoint is resolved at runtime), so
key/wsHost were undefined and the constructor threw. That throw aborted app.js
BEFORE the alpine:init block registered cmdk / modalTrigger / dualChart. app.js
does not re-run across wire:navigate, so the dashboard inherited the broken
state: Alpine could not resolve x-data="cmdk(...)", stripped x-cloak but could
not evaluate x-show="open", and the palette div fell back to its default flex
display — a dimmed, undismissable overlay. Dev (Vite) hid the bug because it
bakes VITE_REVERB_* from the dev .env, so Echo never threw.
Fix: construct Echo only when a usable runtime config is present, wrap it in
try/catch so a websocket/config failure can never take down the UI, and re-run
the guarded init on livewire:navigated so realtime still connects on a
dashboard reached via SPA navigation from an auth page.
Verified on the real prod build (rebuilt VM image): palette stays closed after
first-login -> dashboard, opens on Ctrl+K and closes on ESC, Echo reaches
connected state, zero console errors.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
For the common case where a domain was configured before its DNS pointed here, the
operator can now request the Let's Encrypt cert from System -> Domain & TLS instead of
waiting for the first HTTPS visitor:
- DeploymentService::requestCertificate() does a DNS pre-check (domainResolvesHere via
dns_get_record vs serverPublicIp) and, only when DNS is NOT a clear mismatch, triggers
Caddy's on-demand issuance with an internal handshake (probeCertificate:
`curl --connect-to <domain>:443:caddy:443` — the dial target is pinned to the caddy
service, the domain only sets SNI/Host, so no SSRF). A clear mismatch returns early and
never calls ACME (Let's Encrypt rate-limit protection). The outcome is persisted to the
`tls_cert_status` Setting so the page shows a status without an ACME-triggering probe on
every load.
- System\Index::requestCertificate() is per-user throttled (cert-request:<id>, 5/10min,
auto-expiring -> never a control-plane lockout) and audited (tls.cert_request). The
status line + button render only in caddy mode with an active domain; external mode
shows a note; bare IP hides it.
Automatic on-demand still works on the first HTTPS handshake regardless — this only adds
explicit control + a status. Tests cover the no-handshake-on-mismatch guard, the
issued/failed/not-applicable states, and the per-user throttle. Full suite 192 green;
Codex clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Wrap window.LivewireUIModal at alpine:init to null-guard closingModal()
the way the vendor already guards getActiveComponentModalAttribute, so the
click-away path no longer throws "Cannot read properties of undefined
(reading 'name')" when @persist widens the Alpine/Livewire desync window.
In-sync close behavior (incl. a modal vetoing its own close) is unchanged.
Verified: deterministic browser repro flips threw:true -> threw:false; the
real closeModalOnClickAway() entry is clean under forced desync and the modal
still closes; @persist first-open after navigate, spinner, and Escape/Abbrechen
all remain clean (0 console errors). 182 tests pass; Vite build OK; Codex review
approved.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Modals opened only on the 2nd-3rd click right after a wire:navigate (console:
"Could not find Livewire component in DOM tree") and the trigger gave no feedback.
Root cause: the global wire-elements modal manager was torn down + re-created on every
SPA navigation, briefly losing its window-level openModal listener. Persist it with
@persist so one stable manager + listener lives for the whole session — modals open on
the first click.
Every modal trigger across all views now routes through a new <x-modal-trigger>: an
immediate per-button spinner on click, cleared when the modal mounts, plus a timeout
error toast when a click produced no Livewire commit at all (a true silent failure),
while a server-side no-op stays quiet. The toaster gained an additive level:'error'
(red) variant. Radiogroup/segmented controls (system) and the filename button (files)
use the inline modalTrigger Alpine factory to preserve their semantics.
CHANGELOG also backfills the prior reset-timing residual fix (2520b87).
Verified: full suite green (182), Vite build clean, and in a real authenticated browser —
first-click open (client + server-method), spinner, no false toast on slow modals,
status-disabled buttons preserved, zero "Could not find Livewire component" errors.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two hardening features completed in parallel (each with its own spec + tests),
sharing call sites (TwoFactorSetup, WebauthnKeys, routes) so committed together:
- ConfirmAction token hardening: destructive confirm flows now carry a server-issued,
single-use, signed token (App\Support\Confirm\ConfirmToken) instead of trusting a
client-mutable event/params/auditTarget. Every #[On] apply handler consumes + validates
the token (forged/replayed/direct-bypass calls no-op). Server-scoped per action; closes
the codebase-wide confirm-bypass + audit-forgery vector across Security, Sessions, Users,
WebauthnKeys, Servers\Show, Services, System, Files.
- Backup-code airtight reveal: codes are revealed via a transient channel, not a persisted
Livewire property, so a captured/replayed snapshot can't re-render them; the recovery
download is grant-gated.
Full suite green (162).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Backup (recovery) codes must be viewable ONLY at the moment they are
generated — at first-factor enrollment or on regenerate — and NEVER
re-viewable afterward from "Backup-Codes verwalten".
- Modals\RecoveryCodes: add server-gated $revealed. mount() pulls a
one-time session flag (2fa.codes_fresh); regenerate() sets it. render()
emits codes ONLY when revealed, so a client cannot tamper a flag to
re-view stored codes.
- View: revealed state shows codes grid + download + warning + close;
hidden state shows a security notice + Neu erzeugen + close (no codes,
no download).
- TwoFactorSetup::confirm() and WebauthnKeys::register() put
2fa.codes_fresh on first-factor code generation (put, survives the
redirect + later openModal request).
- Add recovery_hidden_notice (DE/EN parity).
- Tests: manage view hides codes; fresh flag reveals once; regenerate
reveals the new set; first-factor paths set the flag.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
On the Server-Details security section, a single installed tool was capped at
lg:max-w-2xl and left-aligned, leaving a large void to its right. Now a lone
panel spans the full content width and splits its own body into two columns on
lg ($lone flag): firewall = defaults/state | rules list; fail2ban = status
summary + view-bans | whitelist (ignoreip). Two tools keep the side-by-side
lg:grid-cols-2 grid. All wire:click / $dispatch bindings, buttons, and __() keys
preserved; no new lang keys.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The System page was just constrained to max-w-3xl — narrower, not designed.
Rework it into an intentional composition at max-w-5xl:
- Critical alerts (restart-required + bare-IP) are now full-width banners
above the working area, not buried in stacked inset blocks.
- A 2-column lg grid separates "do" from "know": left/main panel holds the
actionable form (domain input + Speichern, TLS-mode selector); right/side
panel is the status & recovery stack (access address, TLS state, SSH reset).
- Release-Kanal stays a full-width band below. Everything stacks to one
column on mobile.
- Header HTTPS/Plaintext pill made more prominent; domain Save promoted to
the primary action.
All wire bindings (confirmDomain, confirmTlsMode, restartNow, restartPending/
restartRequested) and every __() key preserved; two new section-label keys
(section_config, section_status) added with DE/EN parity. Tactical-Terminal
tokens only, no inline styles, existing component kit reused.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The "Gesperrte IPs ansehen" modal did its SSH Fail2banService::status read
in mount(), so clicking the trigger blocked for seconds with no spinner
before the modal appeared.
Split mount() into an instant mount() (stores serverId only) plus a
load() method fired by wire:init, mirroring Services\Index. While
! $loaded the view renders a 4-row skeleton inside the max-h-96 scroll
container; once loaded it renders the real jail/IP list (or empty/error).
The unban flow still re-reads via loadJails() and dispatches
fail2banChanged, keeping #[Locked] $serverId and the audit intact.
Adds Fail2banBansModalTest covering the instant mount (status never
called), load() rendering the list, read-error surfacing, and both
unban success (audit + refresh + dispatch) and failure paths.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
boban