- The Traffic panel header ("Empfangen/Gesendet") drew from the sampled
throughput, which is 0 until the minutely sampler accrues deltas — so a peer
with live traffic (e.g. 244 B) showed "0 B" in the header. It now sums the
live per-peer rx/tx counters, so the header always matches the peer rows. The
chart below stays windowed throughput (fills from the sampler).
- import_hint reworded to state plainly that the WireGuard phone app ALWAYS
prompts for a tunnel name on a QR scan (app behaviour, not changeable); the
.conf download is the path to an automatic name (filename = tunnel name).
Tests: header sums live peer counters. 354 pass, Pint clean, /wireguard 200 with
no console errors, lang parity 89/89.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three things the operator asked for on the WireGuard page:
- DNS is no longer hardcoded to 1.1.1.1. New host action set-dns (_set_dns +
cmd_set_dns + write-bridge branch + WgBridge validation, IPv4 list only),
stored as WG_DNS in wg.env (appended for pre-existing tunnels), surfaced via
the collector + WgStatus, baked into new peer configs (DNS = ${WG_DNS:-1.1.1.1}).
Editable in the Server tab; e.g. point clients at your own gateway.
- The page is split into two independent tabs: "Peers" (list / add / remove /
traffic) and "Server configuration" (endpoint / DNS / port / subnet / gate /
SSH lock + server identity). #[Url] $tab makes it deep-linkable (?tab=server).
- Offline detection: ONLINE_WITHIN 180s -> 150s (PersistentKeepalive=25 keeps
active peers re-handshaking well within it, so no flapping; a disconnect now
shows offline ~2.5 min sooner). Endpoint hint clarified: the port is optional
(auto-appended), no need to repeat the listen port.
Tests: set-dns (write+audit, reject), tab switch/clamp, dns in status; the two
configured-render tests now switch to the server tab for server content. 353
pass, shellcheck clean, Pint clean, both tabs load 200 with no console errors,
lang parity 89/89.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- QR: 0.9.42 over-enlarged it; bring the show-once peer QR back to a balanced
~240px (still crispEdges on a white quiet-zone frame) so it scans on a phone
without dominating the modal.
- Download filename now becomes a useful tunnel name on import: build it from
the endpoint host + peer name (e.g. "10.10.90.165-laptop.conf") instead of the
generic "clusev-wireguard.conf" — WireGuard apps name a tunnel after the file.
A QR scan can't carry a name (the app prompts for one); the import hint now
explains both paths.
Tests: download-filename cases (host+peer, fallback); 349 pass, Pint clean,
/wireguard loads 200, lang parity 83/83.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two dashboard additions to the WireGuard page:
- Peer config download: the show-once new-client view gets a "Download"
button next to the QR code (streams clusev-wireguard.conf) plus an
inline hint explaining QR-on-phone vs download-on-PC import.
- SSH lock (port 22): an optional toggle in WireGuard settings that walls
off host SSH to the tunnel via a dedicated CLUSEV-WG-SSH chain on the
host INPUT chain. Fail-open by construction: ESTABLISHED,RELATED + lo +
wg0 + WG-subnet RETURN before the DROP (live sessions survive, SSH over
the tunnel stays open); _ssh_gate_on refuses while wg0 is down; the boot
unit's ConditionPathExists=wg0 and an in-function self-guard keep a
broken tunnel from ever applying the DROP; ssh_gate_apply re-validates
the subnet shape and fails open on a corrupt wg.env. Strong lock-out
warning shown inline AND in the confirm modal (recommend a backup peer).
New CLI escapes: clusev wg ssh-lock / ssh-unlock; clusev wg down clears
both gates. Panel gate and SSH gate are independent toggles.
Write-bridge: new gate-ssh-on/gate-ssh-off actions (no args, host
whitelist + ConfirmToken wgSshGate, single-use uid-bound). Status collector
now reports gate.ssh. Adversarial lock-out review: all 8 failure modes
refuted. 348 tests pass, shellcheck clean, Pint clean, R12 verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
boban