78 Commits (feat/mailboxes)

Author	SHA1	Message	Date
nexxo	2979f008b5	Stop a mismatched-key decrypt from crashing the mailbox test button	2026-07-28 07:26:42 +02:00
nexxo	ebe29f8a5d	Stop demanding a cipher, a real port, or a decrypted password a mailbox never uses ... MailboxTester required a usable SECRETS_KEY unconditionally, refusing an unauthenticated relay's test-send on a fresh install with no key yet, even though real sending never touches the cipher for that mailbox. Gated the check on authenticates, same as the password-presence check beside it. Comparison pass across MailboxTester and MailboxTransport turned up two more of the same shape. MailboxTransport's delegate-cache fingerprint decrypted $box->password unconditionally, even when unauthenticated and never going to use it — a mailbox that once authenticated, stored a password, and later had authenticates unchecked would crash real sending the moment SECRETS_KEY became unusable. And MailboxTester had no guard against a stored port <1; Symfony silently reinterprets that as port 25 rather than refusing it, so the test button could reach whatever happens to listen there and report success for a configuration MailboxTransport refuses outright. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-28 06:21:28 +02:00
nexxo	5d306fce31	Let a mailbox send without a password when it never needed one ... An SMTP relay with a host and a from address but no username or password - a trusted local or private-network relay - always used to be seeded as a placeholder, because the takeover required a username to treat an account as real, and Mailbox::isConfigured() always required a stored password. Laravel's own SMTP mailer has supported unauthenticated relays all along. Add mailboxes.authenticates (default true, so every existing row keeps its current behaviour) to tell "does not authenticate" apart from "authenticates, but nobody has typed the password yet" - the same empty password column used to mean both. The takeover migration now seeds the real account off the host/address alone and marks it authenticates=false only when neither a username nor a password resolved; isConfigured(), MailboxTransport and MailboxTester all read it before requiring or sending a password; the edit modal gets a checkbox for it with the password field's hint updated to match, in both languages.	2026-07-28 05:54:21 +02:00
nexxo	3278f063ea	Validate purpose mappings against real mailboxes, and clear stale verification on identity changes ... savePurposes() only checked that each key was a nonempty string, so a stale or tampered mailbox key (reachable by posting straight to /livewire/update) saved successfully while MailboxResolver silently returned null for it. Every purpose's key must now name a mailbox that exists; system's must additionally be active, since every unmapped or inactive OTHER purpose falls through to it. EditMailbox::save() also cleared last_verified_at only when the password changed, but smtpUsername() depends on address and username too (falling back to address when username is blank) — changing either while leaving the password untouched kept showing a successful verification for an identity nothing had actually tested.	2026-07-28 04:35:16 +02:00
nexxo	5de1f45703	Close two ways a mail.manage session could take over outgoing mail ... I3: nothing stopped an operator unchecking Aktiv on the mailbox that mail.purpose.system points at. MailboxResolver::active() filters an inactive mailbox at BOTH the direct lookup and the system fallback, so that one checkbox could take mail.purpose.system to null and every purpose without its own mapping down with it — the existing system_required guard on savePurposes() reads as if this were covered, but it only blocks the empty-mapping path, not this one. EditMailbox::save() now refuses active=false against the mailbox 'system' currently points at, the same way savePurposes() already refuses to leave 'system' empty. I4: Admin\Mail::saveServer() writes mail.host — the platform's outbound relay for every purpose mailbox at once — and CloudReady::toMail() puts a customer's Nextcloud admin password in cleartext in the message body. So a signed-in mail.manage session was already a credential-interception primitive, the same threat Admin\Secrets' second gate exists for. Both saveServer() and EditMailbox::save() (only when a new password is actually being typed) now also require passwordRecentlyConfirmed(), following the ConfirmsPassword pattern Secrets.php and Settings.php's two-factor actions already use — including their per-action UI shape (an inline confirm form scoped to the gated action), not a whole-page lock, so address, display name, username, no-reply, active and the purpose mapping stay reachable without confirming, per the brief's capability split. Both gated and ungated paths are covered by tests, and both guards were mutated away and confirmed to fail before being restored.	2026-07-28 03:50:19 +02:00
nexxo	befb67327f	Prove a mailbox works by actually sending from it	2026-07-28 02:56:47 +02:00
nexxo	4211f3dfab	Give the mailboxes a page, and the support sender its own capability	2026-07-28 01:57:11 +02:00
nexxo	3e4d5472a7	Move the one SMTP account into the mailbox table it outgrew ... The seed migration also guards against SECRETS_KEY being unset at migrate time (encrypting the .env password would otherwise throw and take the whole migration down, on a fresh install as much as in the test suite), and the four tests/Feature/Mail files written before this migration reset the mailbox table in their beforeEach so they keep testing what they did before mailboxes.key collided with the seeded rows.	2026-07-28 00:24:54 +02:00
nexxo	9b8d5dfd1e	Editing in modals, an update button that is not gated on a stale reading, and a support page that is real ... Three things reported together. ── Editing belongs in a modal (R20) The seats table grew its input fields into the row. It worked and it looked broken: the row grew, the columns beside it jumped, and a table half in edit mode reads as a rendering fault rather than as a form. The project already had the answer — EditDatacenter, whose own header comment says it avoids exactly that row-height jump — and the seats table simply did not use it. EditSeat is now a ModalComponent. A modal is reachable WITHOUT the page's route middleware, so it resolves the customer itself and re-reads the record rather than trusting a hydrated property: a forged addressEditable would otherwise open the address of an accepted seat, and the address is the person — editing it hands one employee's access to another with nobody told. Only an invitation still in flight can have its address corrected, which is the case that actually comes up. The actions column is now always drawn. It used to disappear when the only seat was the owner, on the reasoning that there was nothing to act on. But every seat can be renamed, and a column that vanishes does not read as "not applicable here" — it reads as "this product cannot do that", which is how it was reported, three times. The owner's row says "Geschützt" rather than leaving an empty cell. Also caught here: the edit fields carried class-wide #[Validate] attributes, so an empty edit form made the INVITE button fail on a field the invite form does not have. Rules for an action belong to the action. ── The update button "I cannot run an update, it says everything is current." `behind` is a READING taken by the agent every five minutes, not the state of the world — push a commit and the console insists it is up to date and refuses to act. The agent does its own fetch before deciding, so asking against a stale reading costs one fetch and finds nothing; being locked out costs the deployment. The button is now offered whenever an agent is alive and no run is in flight, labelled for what it does rather than for what the last reading said. ── The update never announced that it had finished Because the thing being watched restarts the thing doing the watching. Mid-run every wire:poll request fails, and what answers afterwards is a new build being questioned by the old page's JavaScript — so the card sat on "läuft" until somebody reloaded by hand. A small Alpine watcher now asks a plain JSON endpoint (no Livewire, no component state, no assets), treats a failed request as the restart rather than as a fault worth giving up over, and reloads once the build it is looking at is no longer the build it started with. ── Support The page was a decorated placeholder: a button that raised a toast saying the form was "only hinted at in the prototype", three invented ticket titles living in the translation file, and no way to see what became of anything. It looked thin because nothing on it was real. It now leads with the customer's own requests — what somebody arriving here wants to know is what they asked and whether anyone answered — with contact details moved to the side where they belong. The form attaches the plan, the instance and who is asking automatically: making a customer describe their own server back to the people who built it is the part of support people hate. FAQ answers end where the thing can actually be done, and "is it me or is it you" is answered by a link to the status page. 637 tests. R20 recorded in CLAUDE.md and enforced by EditInModalTest: no page view may grow an input field inside a <td>. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 17:55:49 +02:00
nexxo	435a202fdd	Match the panel to the approved template, measured rather than assumed ... The panel had been built by reading the template and believing the result. Every round of review found the same class of defect, so this round the template was rendered in a browser and measured with getComputedStyle, and the implementation measured the same way — two number columns instead of an opinion. That immediately settled a disagreement: a review of the template's SOURCE said the metric grid used a 20px gap. Rendered, it is 14px. The measurement wins. Brought to the template's figures: label 11.5px (it was 11px in three separate places, which is how it drifted — it is now one .lbl rule), value tracking -0.02em, unit weight 450, metric row 6px above and 14px between, page head centred with a 14px gap, grid gap 14px, columns switching at 1101/561px and the h1 at 901px to match the template's own breakpoints, ring 62px, bar 5px. The shared button now takes its height from min-height (40px) rather than vertical padding, at 14px/600 with 0 18px padding and a 10px radius — a button keeps its height whatever sits inside it, icon, spinner or bare text. Also here, from the same round of review: - The chart's blue border was Tailwind's own `ring` utility colliding with a component class of the same name. Renamed to `.metric-ring`. This was dismissed once as a screenshot artefact; it was real. - Page titles lost the `sm:text-3xl` (40px) an earlier bulk edit had appended to 23 of them. The template's h1 is 30px. - The users table has its actions back — edit, suspend, lock and delete — for every seat that is not the owner, with the owner refused in the action itself and not merely hidden in the markup. DemoCustomerSeeder writes one complete customer as real rows: instance, subscription, six seats across four roles, a backup, current-period traffic and thirty days of samples with a deliberate wobble and one day at 286/288 checks. Nothing in the panel is drawn from a fixture any more, so anything missing shows up as missing. Removing the demo is one deletion. Verified: 607 tests, and a Codex comparison of the two measurement sets — "a person would call them the same design", the only difference a 1px gap. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 17:08:05 +02:00
nexxo	85fcc154b8	Measure availability, and let a customer move down again ... Availability is now counted from our own monitoring answers. Uptime Kuma knows the figure, but the REST bridge in front of it only answers "healthy, yes or no", and waiting for the bridge to grow an endpoint would have left the panel without the number indefinitely. The sync already asks on a schedule; counting the answers gives a percentage that is ours and explainable. An unanswered check is not a failed one — the counter only moves when a real answer arrived, so our monitoring going down does not become the customer's outage on the one figure they are asked to trust. An instance nobody has ever checked shows no availability rather than 100 %. The downgrade path existed nowhere. Going down is not the mirror of going up: it can ask an instance to hold more than the target plan allows. Smaller plans are now listed even when they cannot be taken, with the obstacle in the customer's own numbers — "you have 31 users, this package allows 10" — because a greyed-out button that does not name what is in the way is the thing people ring about. Storage is checked against the last real reading rather than the contractual allowance, or anyone who once bought a large plan could never leave it. The limit is re-checked in the action: a rule enforced only in markup is not enforced. And the smaller corrections from this round: - The cloud tab carried a hardcoded "B" as the instance's initial, and the PHP and MariaDB versions, which tell a tenant nothing they can act on. - "EU — Serverstandort im Angebot festgehalten" under a label already reading "Serverstandort" was two sentences saying nothing. It is the country. - Support promised a reply "binnen 4 Std." with nothing behind it. What is true everywhere else is an answer on the same working day. - The actions column appeared even when no row in the table had an action. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:41:15 +02:00
nexxo	ee5e92c0ed	Measure what the template draws ... The panel could not show the storage ring or the transfer trend because nothing measured them. instance_traffic keeps one row per billing period — right for an allowance, useless as a series — and storage consumption was never sampled at all, so the card could only ever state what was sold rather than what is used. instance_metrics holds one row per instance per day, written by the traffic collector on the visit it already makes. A second scheduler entry against the same Proxmox API would have doubled the load and the failure modes for no gain. Disk usage comes from `df` inside the guest rather than from Proxmox's own disk figure, which reports the allocated image: that would show every customer a full 500 GB from their first day. The rule the whole thing is built on: a reading that could not be taken is not a reading of zero. The disk columns are nullable and left untouched when the guest agent does not answer, so yesterday's figure stands instead of the ring dropping to empty — which would tell a customer their data had vanished. Missing days stay missing in the series rather than being filled with zeroes, which would draw an outage that never happened. Both are covered by tests. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:29:28 +02:00
nexxo	c2a56382e1	Build the dashboard cards to the template, and name what has no source ... Card by card against the approved template: label with a chevron, the figure and its unit on one line, a line of context underneath, a bar across the foot. The order matches too — storage, seats, transfer, then the fourth slot. Three of the template's four visuals have no data behind them, and the code now says so where someone will read it rather than leaving the next person to wonder why the charts are missing: - Storage consumption is never sampled. The card states the contractually agreed allowance instead of drawing a ring at an invented level. - instance_traffic keeps one row per period, not a daily series, so there is nothing to draw a sparkline from. The share of the allowance is real, so that card carries a bar. - monitoring_targets records a state and a check time but no uptime figure, so there is no availability percentage to show. That slot carries the last backup — the thing this product is about and can actually prove. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:21:27 +02:00
nexxo	676c38643c	Follow the approved template, and stop showing invented records ... The dashboard was built to my own idea of the layout rather than to the template that was signed off: a coloured pill where the template has a stamped mono line, bare figures where it has a label with a chevron, a unit on its own line instead of beside the number, and no ring at all. There is no point agreeing a design and then building something adjacent to it. The metric card is now a component that draws the template's form, and the pages use it. Two more places were still showing data that does not exist: - Support listed three tickets to every customer, complete with reference numbers and dates. There is no ticket model; it was fixture text. A request list also belongs in the console, where an operator can see who filed what. Removed until there is something real behind it. - The datacentre name reached the customer through the cloud tab's copy as well. Customer surfaces name the jurisdiction; the building is operator information. And the actions column rendered an empty cell for the owner, who can be neither re-invited nor revoked. An empty cell reads as a missing feature; it now says so with a dash and a title. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:17:06 +02:00
nexxo	21d8dc310a	One definition of the navigation, and the country instead of the building ... The breadcrumb said Übersicht on every page. The sidebar and the breadcrumb each built their own copy of the structure, so the layout had no way to know which entry was current and fell back to the first one. Navigation::portal() and ::console() are now the single definition, and currentLabel() matches on the route name — which matters for the console, whose PATH changes between host-bound and fallback mode while its route names do not. The datacentre name is out of everything a customer sees, for the third time and now at the source rather than in a template. Falkenstein is how an operator places an instance; a customer's processing record names the jurisdiction, and putting the building in customer copy means editing that copy every time the estate grows. Also swept the views onto the new scale: --text-faint is 2.8:1 and a decoration token, but it was carrying table headers, hints and timestamps — text people have to read. All of it moved to --muted, which is 5.0:1 and passes AA. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:09:39 +02:00
nexxo	6376f5e9fa	One design system for every surface ... The console was a second product. admin-tokens.css held a complete dark set — its own surfaces, its own orange, its own status triad — so every shared component had to work in two worlds, and the two halves of the application drifted apart in ways nobody could see from inside either one. That file now carries density and nothing else: smaller type, tighter rows, tighter corners. Colour comes from one place. The tokens themselves are rebuilt around what the redesign settled on: - Radii scaled to object size (9/11/16/22) instead of one value everywhere, which is what made the interface read as a design-system specification rather than as a product. - Warm, broad, low shadows. A neutral grey drop shadow belongs to a different design language and reads as cold on this ground. - --accent-press, which several rules already referenced and nothing defined. An undefined var() does not make a browser skip the declaration; it computes to , and for background-color that is transparent — the accent button lost its fill on hover and left white text on white. - No serif. A serif headline is what made every page read as a document, which is the impression the whole redesign exists to remove. --font-serif now points at the sans so nothing breaks while call sites are cleaned up. The two shells are one shell with two configurations, and both finally have a mobile navigation: the sidebar used to simply disappear below 900px, leaving no way to move around the application at all on a phone. The customer dashboard is bound to real records — instance, seats, traffic, backups, contract — instead of the fixtures it shipped with. Where something is not measured, storage consumption, it says what was contractually agreed rather than inventing a figure. This is the sheet a customer forwards to their auditor. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 16:03:47 +02:00
nexxo	3699c7cdb9	Ask the tunnel gateway where it actually listens ... The console has been unreachable over the VPN, and the cause was the readiness probe rather than the tunnel. The gateway binds to the WireGuard hub address alone; the probe asked 127.0.0.1, where nothing has ever listened. It could only fail, so VPN_READY stayed false, and on that basis the application withheld the `DNS = 10.66.0.1` line from every client config it issued. A phone then built the tunnel, asked its normal resolver for the console hostname, got the public address and had its connection closed — indistinguishable from "this site does not exist", which is exactly what it looked like. Probing over TLS on the bare address would not have worked either: the site matches on the console's hostname, so a request without SNI is offered no certificate. The gateway now answers a plain-HTTP health port on the hub address, which removes TLS, SNI and name resolution from the question and answers only what is being asked — is this gateway listening, in this network namespace, right now. Caddy refuses to start when the certificate is unreadable, so a health port that answers still proves the whole file loaded. Also here, all found while looking: - Icons pushed their label onto a second line and rendered a size larger than asked for. Tailwind's preflight makes an svg display:block, and `.size-4` and `.size-5` have equal specificity, so stylesheet order decided — and it emits size-4 first. Every icon written as 16px was silently 20px. Recorded as R18. - Four error pages printed `errors.404.hint` in place of a sentence: the lang files give those codes a null hint and Laravel returns the key for a null line. - The Developer role had no label in either language, so the dropdown showed `admin_settings.role_developer`. - The secrets area held one key, which is not worth a password gate. It now carries the credentials that actually stop the business when they expire — DNS, monitoring, SMTP — and the test button appears only where a checker exists, instead of reporting on Stripe whatever was being looked at. - The update button said nothing about when a queued run would start or where a running one had got to; both are now shown, and a failure names its step. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 14:43:23 +02:00
Claude	99715989aa	Dress the placeholder page, and record why the obvious VPN fix cannot work ... The page shown while the site is hidden was still in the old style — a coloured square and system fonts — on the two hostnames a visitor is most likely to try. It now uses the site's own plate, typeface and registration marks, still entirely self-contained because it is shown precisely when the asset build may not exist. Both it and the error pages lighten the accent in dark mode: the tone is chosen for contrast against paper, and on the ink plate the small text is the first thing to stop being readable. The VPN investigation ended somewhere useful, and not where it started. The blank page on the phone is the reverse proxy refusing the request — `respond 404` sends no body. It refuses because the phone is not on the tunnel: the client config lists only the management subnet in AllowedIPs, so a request to the console's public hostname goes out over the mobile network and arrives from a carrier address. It also explains "last contact: never", since WireGuard only performs a handshake when it has traffic to send, and nothing is ever routed into the tunnel. The obvious fix — add the server's public address to AllowedIPs — is written down here as a comment and a test rather than as code, because it cannot work. The WireGuard endpoint is that same address, so routing it into the tunnel routes the handshake packets into the tunnel they are trying to establish. The result is a loop and a connection that never comes up: the same blank page, now with no way in at all. Reaching the console over the VPN needs an address INSIDE the subnet — the proxy answering on the hub address, and a name that resolves to it. That is a deployment change, not something a config line can express. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 09:19:30 +02:00
Claude	a58faf3f85	Manage the Stripe key from the console, behind a password and a test ... Changing a key meant a shell, a file edit and a cache rebuild — and the person who owns the Stripe account is not necessarily the person who owns the server. Two gates, not one. The capability decides who may open the page; every operator has console.view, and that must not mean "can read the payment key". The password decides whether this SESSION may see or change anything, because the realistic threat is not a stranger but an unlocked machine, and a session is exactly what that hands over. Both are re-checked server-side on every action — a Livewire action is reachable by anyone who can post to /livewire/update. The value is stored encrypted under a key of its own, SECRETS_KEY, and the vault refuses to work without it rather than falling back to APP_KEY: rotating APP_KEY is ordinary maintenance and would otherwise destroy every stored credential, discovered when Stripe stops answering. It is read where it is used, not overlaid onto config at boot — an overlay adds a query to every request including the public site, and leaves queue workers holding whatever was true when they started. It is never shown again, only outlined, and never enters a Livewire property that would carry it to the browser and back in the snapshot. A registry, not an env editor: a form that can set any environment variable is a privilege-escalation primitive, and one bad value bricks the installation with no way back through that same form. The test button is the part that matters. It reports which Stripe account the key belongs to, whether it is LIVE or test — the most expensive mistake here is pasting one where the other belongs, and both look identical in a form — and which webhook endpoints exist with the events each subscribes to. A key can be perfectly valid while the endpoint listens for the wrong five events, and nothing fails until a payment goes unrecorded. The webhook signing secret deliberately stays in .env. It is read on every incoming payment event; in the database, a database problem becomes silently failing signature checks. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 09:01:16 +02:00
Claude	f6b9181ed8	Give customers two-factor, and stop every button on the settings page reacting at once ... Clicking Save made every button on the console's settings page appear to fire. Seven `wire:loading.attr="disabled"` had no `wire:target`, and without one Livewire applies the loading state to ANY request on the component — so one save put all of them into their disabled state simultaneously. Each names its own action now. Two-factor for customers. Fortify's endpoints already existed; only the screen was missing. Setting up requires re-entering the password first, and every action re-checks that server-side rather than relying on the button not being on screen — a Livewire action is reachable by anyone who can post to /livewire/update. The confirmation marker is Laravel's own session key, so it and the framework's password.confirm middleware mean the same thing rather than drifting apart. The secret never enters a Livewire property. Component state travels to the browser and back in the snapshot; the QR image is derived from the secret, the secret is not in it — and there is a test that says so. The status page moves to the ROOT of its hostname: status.clupilot.com/status says the same word twice. That needed the domain-bound `/` registered BEFORE the landing page, because Laravel takes the first match and the landing route is host-agnostic — so the status host would have served the marketing site. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 08:48:34 +02:00
Claude	935c9ae6ac	Let people change their own password, and a location be switched off while editing it ... Three gaps, all of the "half-built" kind. Nobody could change a password. Fortify's updatePasswords feature was switched off, so an account created with a generated password kept it until someone opened a shell on the server — including the owner's own. Both settings pages have the form now, sharing one concern, because two copies of a password rule is how one of them ends up weaker. It goes through Fortify's own action rather than hashing here, and the current password is required: an unlocked machine should not be two keystrokes away from locking its owner out. The datacenter edit form had no active switch. The column and the scope existed, and the list page has a toggle — but the form you open to change the thing did not offer the one lifecycle action a location actually needs. Switching one off now says what it does NOT do: existing hosts keep running. Once, on the actual transition, and as the only message — the generic "saved" toast would otherwise replace it, and an already-inactive location would have announced its own deactivation every time its name was edited. The staff table's actions cell is empty for your own row, because you cannot revoke yourself. With a one-person team the column was therefore always blank and read as broken rather than as a rule. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 07:49:07 +02:00
Claude	bc8bbc56a5	Make the console's access list reach the proxy, price in euros, and answer errors ... The console was unreachable, and not for the reason it looked like. Two causes, both mine. A failed `artisan optimize` — the one that hit duplicate route names — left a broken route cache behind, so every request to the console host answered 500. Rebuilt. Underneath that: the reverse proxy has its own console allowlist, hard-coded, and it runs BEFORE the application. Everything added on the console's own access page was therefore ineffective, and when the owner's address changed they were turned away by the proxy before reaching the page that would have fixed it. The proxy now imports a fragment generated from the same list the console manages, regenerated by the host agent and reloaded when it changes. Getting that safe took most of the review. It refuses to rewrite an ambiguous Caddyfile rather than replacing some other site's matcher; it never falls back to a loopback-only list when the application cannot be reached, because that list validates cleanly and locks out every remote operator; it retries a reload that failed instead of assuming it worked; and an installation that upgrades without rerunning the installer is told, because otherwise the whole mechanism is invisibly absent. Prices are entered in euros. The form asked for cents, so €799 was typed as 79900 and one slipped digit was a factor of ten on an invoice. Conversion happens in one place, on the string rather than through a float — (float) '79.90' × 100 is 7989.999… and casting truncates to 7989, one cent short on exactly the prices people charge — and it refuses an amount the column cannot hold instead of failing at the database. Every error code has a page now, in the site's own language and typeface, self-contained so it still renders when the asset manifest is the thing that broke. There was only a bare white 404. The VPN list stops being a seven-column table nobody could fit: names broke across two lines and so did the headings. These are attributes of one access, not quantities compared down a column, so each access is a row — identity on one line, measurements in mono on the next. The status page says what it measures rather than what it promises. "New orders are delivered without failures" read as a marketing claim on a page whose only job is to be believed, and said nothing about the last 24 hours. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 06:51:05 +02:00
Claude	492b1925fb	Land a sign-in where it was performed, not always in the customer portal ... Fortify sends every successful sign-in to config('fortify.home') — /dashboard. That is why an operator signing in ended up in the customer portal, and once the console has a hostname to itself it stops being merely confusing: /dashboard does not exist on that host, so signing in would land on a 404. Three outcomes now, decided by where the sign-in happened and who signed in: the console for an operator on the console, the portal everywhere else, and for a non-operator on the console the session is taken away again at the moment it was created — a guard that merely refuses each page afterwards leaves that session in the browser. Four things the review caught, each of which would have left a hole: - Fortify never reaches LoginResponse when a two-factor challenge was involved. Binding only that one left exactly the accounts most likely to be operators on the old behaviour, so both exits are bound and share one decision. - The JSON branch ran before the authorization check, so a JSON client kept a session a browser would have lost. - The two exits do not share a JSON success contract — an ordinary sign-in answers {"two_factor":false}, a completed challenge answers an empty 204 — and merging them breaks a client keying off the status code. - In shared mode everyone posts to /login, so the request never looks like the console even when /admin is the destination. The intended URL is read too. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 06:15:16 +02:00
Claude	de6821b53e	Move the console off /admin, give the status page its own address, and measure monitoring ... Three things the owner asked for, and one the review found underneath them. The console leaves /admin. It has its own route file now, registered before routes/web.php because once it has a hostname to itself it sits at the ROOT of that host — where `/` and `/settings` also exist for the portal, and the first matching route wins. Where it mounts is one decision in one place: `/` on the console hostname where it has one to itself, `/admin` on any host otherwise. Names stay admin.* in both modes, so nothing that builds a URL has to know. Exclusivity is its own switch, not a consequence of having a hostname. The first attempt made "this host is the console" follow from ADMIN_HOSTS, and a development machine lists its own IP there so the console works without DNS — which took the public site and the portal off that machine entirely. The switch also registers the console on every listed hostname, canonical last, so the alternates that exist as recovery paths keep working. The status page moves out of /legal, where it sat beside the imprint and the terms. Nothing about the current health of the platform is a legal document. It is a real page now: portal, instances, provisioning and backups, each derived from records, aggregate only, and a component with no signal reports "unknown" rather than "operational". That last rule is what exposed the real bug. monitoring_targets.status was written once — 'up', at provisioning — and nothing ever updated it. Both the console's notices and the new public page read it, so an outage would have been published as healthy indefinitely. There is a sync job now, on a five-minute schedule, and a checked_at column so a verdict can go stale instead of standing forever. The monitoring contract had to grow a third state for that to be honest. isHealthy() answers true when no monitoring is configured and false when the monitor is unreachable; recording that boolean would have published either a fleet-wide all-clear nobody measured or a fleet-wide outage that was really one broken monitor. health() returns null for both, the recorder leaves the old verdict to go stale, and isHealthy() keeps its forgiving semantics for the one caller that wants them — the provisioning acceptance check, which must not fail a delivery because monitoring is not set up. Backups are counted from the instances that need protecting rather than from the backup rows that exist, so an instance with no schedule at all cannot be missing from the arithmetic that declares the estate protected. Also: the update panel polls itself, offers the button only when there is something to install, and opens the log while a run is in progress. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 06:05:40 +02:00
Claude	276f926d57	Add the update button, and give it a host-side agent that can actually update ... The panel had no way to update the installation, and could not have one on its own: it runs as www-data inside a container, and the update restarts that container. A button that shelled out would kill its own web server mid-response, and would need the application to hold host-level credentials — a far worse thing to own than an out-of-date checkout. So the button is a mailbox. The panel writes a request into the checkout; a systemd timer on the host, running as the service account, consumes it, runs deploy/update.sh and writes back what happened. The same timer answers the question the panel cannot answer alone — is there anything to update — which needs a git fetch, and therefore credentials the application does not have. The parts that were wrong before review, all of which would have shipped as a button that looks fine and does nothing: - The agent was only installed by install.sh, which the installed base never runs again. Every existing server would have shown the button permanently disabled. It has its own root entry point now, install.sh delegates to it, and update.sh says so when the unit is missing. - On a release-pinned server the checkout is detached, so it followed "origin/HEAD" and then ran an update that deliberately stays on the pinned tag: updates advertised, nothing applied. It now compares TAGS in release mode and passes the target release through. - On a branch other than main it advertised that branch's commits and then deployed main's, because update.sh defaults to main. - A request written while the agent was down was executed whenever the agent next started, days later. - A single status file meant the routine five-minute check overwrote a failed update with "idle" before anyone saw it. - An agent that had been stopped left the button enabled forever, because a status file written once counted as an agent. - The agent's error messages were German strings rendered into an English interface; it reports codes now and the panel translates them. Also: the add-address button in the console-access panel was as tall as the field plus its hint, because the hint was a sibling inside the flex row. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 05:33:17 +02:00
Claude	30a80b6c15	Report the estate from the database, and print the traffic that is sold ... Three console pages were fiction. The front page claimed 42 customers, 39 instances, four hosts named pve-fsn-1..3 and €7,842 a month, over a twelve-month growth curve; the instance list held seven invented machines; the revenue page reported churn and a trend for a business with no recorded history. All of it was hard-coded. It read like a running company and measured nothing. They now read the database. Two figures are gone rather than approximated — the revenue trend, which needs a monthly history nobody records, and churn, which needs a base the data cannot supply. ARR stays, labelled as the projection it is. The green "all systems normal" badge is computed from the notice list instead of asserted, and the notices themselves come from failed runs, hosts reporting errors or gone quiet, and monitoring that is down. Host load is the one number that had to agree with something else: placement counts the VM disk allocation, ignores a failed instance that never got a VM, and subtracts the host's reserve. A dashboard doing its own arithmetic would show a host as comfortable while orders were already being refused on it, so it uses the host's own accounting — with the filter moved into a scope both share, and the sum preloaded so listing hosts stays one query. The instance list drops the Nextcloud version column: that version is not recorded anywhere, and a column filled with a plausible number is worse than no column. Statuses the lifecycle writes but nobody had translated no longer render as "admin.status.failed". The price sheet also gains the included traffic, which the catalogue has always carried and the page simply never printed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 04:48:51 +02:00
Claude	b844ff377d	Rebuild the public site as a document, and read prices from the catalogue ... The marketing page was a generic centred hero in the system font stack: it neither used the design system the console is built on nor looked like the product it sells. Rebuilt around what CluPilot actually promises — security you can produce evidence for — so the page reads as a controlled technical document: a specification plate instead of a hero image, numbered sections, an audit register with rhythm and proof per measure, and a price sheet rather than floating cards. IBM Plex Serif joins Sans and Mono as the display voice, self hosted as static files so the public page renders even without the Vite build. The prices were written into the page by hand, and the page and the catalogue had already drifted apart on three of four plans: the site advertised 249 € for a plan the checkout charges 399 € for. The sheet now reads the catalogue, like every other caller — including the currency, which is configurable and was also hard-coded here. The catalogue fails loudly on purpose; a public website must not. A broken or overlapping catalogue is caught in the controller alone: the page still renders, the sheet is replaced by "on request", and nobody is quoted a number the checkout would not honour. The sign-in and registration panels shared a copy-pasted orange gradient. They now share one component and the same ink plate as the site, so the two halves of the product no longer look like two companies. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-27 03:52:25 +02:00
nexxo	9ccd4f59d8	feat(security): the console decides who may reach it, and the owner keeps the list ... RestrictAdminHost answers under which NAME the console responds — and the caller picks the Host header, so it can never answer who is asking. This does: a network gate on the client address, which behind a trusted proxy is not something the client chooses. The management VPN is always in the list and cannot be removed — it is the one way in that survives a bad entry. Beyond that the owner keeps their own addresses in the console, because being away from the VPN should not mean being locked out, and the person who needs to change that list is the person sitting in front of it. Two refusals rather than warnings, since by the time a warning renders the request that would show it has already been rejected: switching the restriction ON is refused unless the address doing the switching is already covered, and removing the entry you are sitting behind is refused. Entries are validated as an address or CIDR — a typo that matches nothing is how someone locks themselves out while believing they have not. 404, never 403. Registered as persistent Livewire middleware, and verified in a browser that it holds there: with the settings page open, narrowing the list turned the next action from 200 into 404. Codex read the path guard as skipping /livewire/update; Livewire in fact replays middleware against a duplicate of the request carrying the original component's path, so the guard matches and the client address is preserved. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-26 20:27:26 +02:00
nexxo	e9240c1324	feat(deploy): releases you can pin to, and a version that tells the truth ... VERSION at the repository root is the release number and the only place it is written down — a file rather than `git describe`, because a source archive, a shallow CI checkout and a container built without .git have no tags to describe. Cutting a release is editing that file and merging it; CI creates the annotated v<VERSION> tag once green, only on the commit that raised the number, and never moves it. Servers are pinned to these. Two modes, and the difference is the point. RELEASE=v1.0.0 pins a server to an immutable tag, checked out detached: it moves when someone decides it moves. BRANCH=main follows the edge, where CI tags a commit only after it is pushed. The mode is remembered, so re-running the updater on a pinned box does not quietly walk it back onto main. Going backwards is refused, by commit ancestry rather than by comparing version strings — a tag can be cut from anywhere, and only ancestry says whether history is going back. The schema has already moved forward by then, and the migrations needed to reverse it are not in the older checkout at all. What the console reports comes from a manifest written atomically after every step succeeded, never from live git: git says what the files are, not whether the deployment came up. So a failed update keeps reporting the version that is actually serving — including its version number, not the newer one the checkout has already moved to. A deployment pinned to the tag reads "1.0.0 (abc1234)"; anything else reads "1.0.0-dev (abc1234) · main", because every commit after the tag still carries VERSION=1.0.0 and is not that release. Reporting it as one is how a bug gets filed against the wrong code. Codex reviewed the design before it was written and the result six times after. Its findings, all real: the version had to come from the manifest too, not just the commit; branch names need JSON escaping or the manifest silently vanishes; a `case` glob does not anchor and accepted 1x.2y.3garbage; pinning to the commit a server already sits on skipped recording the mode, and then skipped detaching; a manifest that failed to write would never be repaired; an unparseable timestamp would 500 every admin page; and an empty tag list read as a connectivity failure. 466 tests green. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-26 15:21:38 +02:00
nexxo	7582df3de6	feat(billing): a proof register, and modules frozen at their booked price ... Two things the contract could not answer on its own: what happened, and what the customer's whole bill is. `subscription_records` is append-only, one row per commercial event. Flat columns for everything searched or relied on as evidence — event, customer, subscription, plan family and version, term, net/tax/gross, currency, tax rate, reverse charge, Stripe ids — PLUS a versioned JSON copy of the whole snapshot. Not JSON alone: you cannot query it, and "the amount is in there somewhere" is poor evidence. Copied, not joined, so a row still answers after the customer, the plan or the version have gone. The flat columns describe the TRANSACTION. Gross is what was actually taken; net and tax are that gross split by the rate that applied on the day. A discount lowers the taxable amount rather than creating negative VAT, and a free checkout is recorded as free instead of as paid in full. What was agreed sits beside it in the snapshot, so a charge that differs from the catalogue is preserved as a question rather than reconciled away. The register refuses to be rewritten, in bulk as well as one row at a time — model events do not fire for `query()->update()`, which is exactly the shape a careless data fix takes. `subscription_addons` carries the owner's rule: a customer's total is their subscription plus their modules, and all of it is frozen at what was agreed. Price protection covering only the plan would let a module quietly double for someone who booked it two years ago. A module they have NOT booked is a sale still to be made, at today's price — so the catalogue is consulted only for what is not in this table. Several bookings of one module are summed rather than reduced to one arbitrary row, or the page and the bill would disagree. Concurrency: one order books one module, enforced by a unique index rather than a lookup two retries can both pass; cancellation is an atomic claim; and each booking commits with its own register entry, so a failure cannot leave a sale without evidence and a retry that finds the booking cannot skip the event. Verified in the browser: with the module raised from 29,00 € to 59,00 € in the catalogue, the customer who booked it still sees 29,00 € and a total of 208,00 €, while a new customer is quoted 59,00 €. 436 tests green. Codex review clean after seven rounds. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-26 13:07:34 +02:00
nexxo	f6ddf45dc0	feat(admin): a console for creating, pricing and scheduling plans ... The owner can now do from the console what only a config edit could do before: create a plan line, draft a version, price it, publish it into a window, and pull a plan out of the shop. Two pages and one modal, because the catalogue has exactly two levels. The plan list is a name, a rank and a kill switch. Everything that can be got wrong — capabilities, prices, windows — lives on the versions, where the page is built around the one rule that matters: a draft is freely editable, a published version is not touchable at all. So drafting and publishing are separate acts, and publishing says plainly that it is final. The console refuses everything the catalogue refuses, on the form rather than as a stack trace: an overlapping window, a window that ends before it starts, a version with no price for a term we sell on, and — new here — a version with no VM template, which would be bought and then fail provisioning every time. Numbers are bounded on both sides, because a mistyped price otherwise overflows the column and answers with a 500 instead of saying which field was wrong. Performance class and features are picked from the keys we have labels for; free text would be frozen at publication and shown to customers as a raw translation key forever. Concurrency, since two admins share one catalogue: draft numbers are allocated under a lock on the family, publication is an atomic conditional claim, and discarding a draft is one statement conditional on it still being a draft — otherwise a draft published in the meantime could be deleted out from under the customers now contracted to it. `plans.manage` (Owner and Admin) guards the pages themselves, not only the buttons, and the modal authorises itself — prices, drafts and unreleased plans are not something to leave readable to anyone who types the URL. Also fixes the shared checkbox, which ticked in the browser's own blue on every page that used one: a native checkbox ignores text colour and needs accent-color. Verified in the browser: withdrawing a plan in the console removes it from the customer's billing page immediately, and restoring it brings it back. The public landing page carries no catalogue-driven plan list, so there is nothing there to hide. 421 tests green. Codex review clean after six rounds. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-07-26 12:41:51 +02:00
nexxo	76510a59a3	fix(billing): VAT follows the customer, not a global setting ... Codex was right that this could misstate real charges: an EU business with a VAT ID registered in another country is billed under reverse charge, and we were adding 20 % Austrian VAT to their total anyway. TaxTreatment resolves it from the customer's VAT ID, and the whole page — cart, plan cards, add-on cards — now states one treatment instead of contradicting itself. Explicitly NOT handled: cross-border sales to private individuals, which are taxed at the buyer's national rate under OSS. That needs a maintained rate table and a tax adviser, not a guess, so those fall back to the domestic rate — over-collecting rather than under-collecting. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 09:30:17 +02:00
nexxo	a87a4f512d	feat(billing): one plan change at a time, and every price says what it is ... Two contradicting plan upgrades sat in the cart at 799 and 399 € — no checkout could resolve which one the customer meant. Choosing another now replaces the pending one and says so; add-ons still stack, because buying 200 GB as two packs is a sensible thing to want. Every price now states net or gross and how often. The cart shows net per line with "pro Monat" or "einmalig", then subtotal, VAT and gross — and separates the monthly recurring amount from a one-off traffic top-up sharing the same cart, because those are two different commitments. The rate is configurable (CLUPILOT_TAX_PERCENT, 20 % default) since it follows the seller's country. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 09:23:49 +02:00
nexxo	aae0457e19	feat(admin): administrator access to a customer's Nextcloud ... Impersonation borrows the customer's portal session; this is access to their installation, which is a different thing and now a different button. Nextcloud has no passwordless admin jump, so this does the only honest thing it offers: it resets OUR managed admin account inside that installation and hands the credentials over once. The customer's own accounts are untouched, and the next request sets a new password again. - New capability instances.adminlogin, Owner and Admin only — stronger than impersonation, because it hands over control rather than a session. - The operator's own password is required every time, rate-limited: taking over a customer's installation is not something an unattended browser should manage on its own. - The reset runs on the provisioning worker (it owns the tunnel and the Proxmox credentials); the console polls a handoff token, so the credentials never enter a Livewire snapshot. - A silent instance is reported as such instead of appearing to succeed. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 05:30:59 +02:00
nexxo	d26200c74b	feat(billing): a cart you can actually read and change ... "5 purchases pending" told nobody what they had ordered and offered no way to change their mind. The billing page now lists each pending purchase by name, what it costs, when it was added, and the total — with a remove button per row behind a confirmation, like every other destructive action in the console. The wording lives on the Order model rather than in the view, so the cart, the invoice list and any later confirmation mail cannot each invent their own name for the same row. Removal is scoped to the customer's own still-pending orders, checked in the modal itself: modals are reachable without the page's guards. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 05:26:49 +02:00
nexxo	556a560506	feat(vpn): explain a missing download, and offer a way out ... An access created without storing its config had no download button and no explanation — it looked broken. It now shows a dimmed button that says why (the private key only exists on your device), and every staff access gets "Re-issue": a new keypair, old key off the hub before the new one goes on, so two peers never claim the same tunnel address at once. A stored config is re-encrypted in step, or the owner would download a key the hub no longer accepts. Host peers are excluded: their key belongs to the machine's own wg0, and swapping it here would cut the host off with nothing left to repair it. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 01:20:04 +02:00
nexxo	8117630a65	feat(ops): update page, automatic 419 recovery, CI workflow ... Three things that bit us on every deploy: - artisan down now renders a branded page that says an update is running and reloads itself, instead of Laravel's bare 503. - A page left open across a deploy carries a Livewire snapshot and CSRF token the new code rejects — the user got "419 Page Expired" and a dead interface. A 419 from a /livewire/ request now reloads the page; the session is still valid, so that is all it takes. Hooked at the fetch layer rather than through Livewire's request hook, whose failure callback is not invoked for this case in the installed version — verified against a real 419 in the browser, not a simulated one. - Vite no longer empties its output directory: wiping it is what left an open page without its stylesheet mid-deploy, which is the "design is completely broken" symptom. update.sh also rebuilds the caches with optimize:clear + optimize instead of leaving them half-warm. Plus CI: .gitea/workflows/tests.yml (Pest + asset build, and a tested- tag only on a green main) and an opt-in act_runner service under the ci profile. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 00:58:27 +02:00
nexxo	062d337dd0	fix(portal): move notices into the header, so the page stops scrolling twice ... The banners sat outside the h-screen shell, so the page scrolled and the content scrolled — two scrollbars whenever a maintenance window was active. Maintenance notices are now a bell with a count in the header, next to the user menu that was otherwise the only thing up there. Impersonation stays visible as a header chip rather than moving into the dropdown: it is a mode, not a notice, and acting as someone else without noticing is how mistakes happen. Also: the VPN status pill wrapped onto two lines in a narrow column. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-26 00:13:20 +02:00
nexxo	c1e81808a7	feat(traffic): meter the monthly allowance, show it, throttle instead of blocking ... Customers can now see what they have used and what is left, and the service slows down rather than stopping when the allowance is gone — a slow Nextcloud gets a top-up, a dead one gets a cancellation. - instance_traffic keeps one row per instance per month. Proxmox counters are cumulative since the VM last started, so usage is the difference between two samples, and a counter that went backwards means a restart, not a refund. - Outbound is what counts: inbound is free at our providers and egress is what Hetzner's 20 TB per server applies to. - CollectInstanceTraffic samples every 15 minutes, warns once per threshold (80/95 %) rather than on every run, and at 100 % limits the VM's NIC via Proxmox — released again as soon as the customer tops up or the month rolls over. - The dashboard gets a full-width band (it throttles the service, so it is not a tile among tiles) with the top-up offer right next to the warning. - Bytes are formatted in SI units now: allowances are computed in SI, so dividing by 1024 made a 1000 GB plan read as "931 GB". Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 23:33:47 +02:00
nexxo	e2b4cdbac4	feat(site): switch the public website and portal off from the console ... While the product is still being built, the marketing site and the customer portal should not be reachable — but they must stay reachable for us. - A toggle in the console (site.manage, Owner/Admin) stored in a new app_settings table, because this has to be flippable without a deploy. - Outsiders get a placeholder with 503 + noindex, not 200: a 200 invites search engines to index the placeholder as the site's content, which is far harder to undo than to prevent. - Anyone on the management VPN, and any signed-in operator, sees the real site. The console, Livewire's endpoint, the Stripe webhook and the health check are always reachable — otherwise the switch could only be flipped once. - robots.txt is generated by the app and follows the switch. It had to stop being a static file: nginx short-circuited it and Laravel's stock file said 'Disallow:' with an empty value, so crawlers were never told anything. - Settings reads fall back to the default when the table is unavailable. The gate reads one on every request, so a deploy running new code before migrate would otherwise answer the entire site with a 500. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 23:10:27 +02:00
nexxo	7f60f88542	fix(maintenance): make the window form usable ... The action labels wrapped to two lines and crushed the column — now icon buttons with tooltips, like every other admin table. The form column was too narrow for its content: the datetime fields silently clipped their own value, so they are stacked and full width now, with duration chips because typing an end timestamp by hand is the fiddliest part of the form. Host rows show a real selected state and a per-datacenter count, and the impact column says "1 Host · 1 Kunde" instead of "Host(s) · Kunde(n)". Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 23:05:33 +02:00
nexxo	0d9b62eb50	feat(vpn): ownership, a Developer role, and password-gated config retrieval ... Reworked after a design consultation with Codex, which pushed back on my first proposal in three useful ways. Ownership and rights: - vpn.manage split into vpn.view.all and vpn.manage.all. Seeing an access is not managing it, and neither is holding its private key. - Record-level rules live in VpnPeerPolicy, not in permissions: an access belongs to a person, and ownership is what grants sight of it. Every operator reaches the page, but sees only their own unless they may see all. - Issuing an access is not self-service — it reaches the management network, so it needs vpn.manage.all even for oneself. - New Developer role: sees everything, manages nothing. Writing code does not imply authority over other people's access. - kind (staff|host|system) replaces a null user_id that had to mean two different things at once. Config storage, opt-in per access: - Downloading is owner-only — explicitly NOT for view.all or manage.all. An admin who needs access revokes this one and issues their own, which keeps the record of who holds what honest. - The password is asked on EVERY retrieval, rate-limited. Laravel's password.confirm keeps a 15-minute session stamp, which would authorise unlimited later downloads from an unattended browser. - Stored under VPN_CONFIG_KEY, not APP_KEY: a leaked application key must not also hand over the management network. Purged on revocation and when a staff member is revoked — console taken away, tunnel left open was the worst case. - The plaintext never enters a Livewire snapshot (the page polls every five seconds); the component carries an opaque handle instead. Also: copy button works without HTTPS again (navigator.clipboard only exists in a secure context, so over http it silently did nothing), plus config download as a file and a QR code for the mobile apps. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 22:31:54 +02:00
nexxo	c54b718566	fix(vpn): never let an access hijack a host key; name adopted peers correctly ... - A host's wg_pubkey may not be in vpn_peers yet, so the duplicate check passed and an operator could create an access with it. ApplyVpnPeer would then run wg set with a freshly allocated address, rewriting that host's allowed-ip and cutting CluPilot's management tunnel to a live machine. Creation now rejects keys already held by a host, checked under the allocation lock. - A sync landing between addPeer() and the step storing wg_pubkey adopted the peer as "unknown", and a later sync filled in host_id but left the name, so the page showed that host as unknown forever. The name is now filled in when the link becomes known — only for sync-adopted rows, so an access an operator named keeps its name. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 21:58:03 +02:00
nexxo	08670ecbee	fix(vpn): stop revoked accesses coming back and stale jobs undoing intent ... Two lifecycle holes Codex found in the new VPN management: 1. Delete removed the row before the hub knew. If the removal job was delayed or failed, SyncVpnPeers saw a peer it did not recognise and adopted it back as a live access — silently restoring what an operator had just revoked, and with no row left to revoke it again. Deletion is now a soft-delete tombstone: the row survives until the hub confirms the peer is gone, the sync retries the removal instead of adopting, and the tombstone is purged only once the peer is really absent. It also keeps the key and the tunnel address reserved meanwhile, so neither is handed out twice. 2. ApplyVpnPeer applied the state captured at dispatch. A retried block job could therefore undo a later unblock, and nothing would repair it — the sync only observes state, it never re-applies intent. The job now resolves the current desired state from the row and treats its payload as a fallback for the case where the row is already gone. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 21:41:03 +02:00
nexxo	71ca0e1394	feat(admin): VPN access management with live peer state ... The console can now create, block and remove VPN accesses, and shows who is actually connected — traffic counters, source endpoint and last handshake. Design notes: - The web container has no wg0, so the page never talks to WireGuard. Live state is copied in by SyncVpnPeers on the provisioning queue (the only worker whose container owns the interface); the page polls the database and merely nudges that job, throttled so many open tabs cannot flood the queue. - enabled (operator intent) and present (observed on the hub) are stored separately, so a sync can never quietly undo a block and drift stays visible as "wird angewendet". - The sync adopts peers the host pipeline registered, naming them after their host — otherwise "who is on the VPN" would have blind spots. - Keypairs are generated in PHP via libsodium rather than shelling out to wg genkey (no interface in this container, and it keeps generation testable). The private key is shown once and never stored. - allocateIp() now also considers vpn_peers, which would otherwise be handed a tunnel address a host already holds. - vpn.manage is a new capability held by Owner/Admin only, and it hides the nav entry too — a VPN access reaches the management network. Verified end to end against the real hub, not just mocks: created an access in the browser, connected with the generated config, watched the console flip to "Verbunden" with real counters, then blocked it and confirmed the peer was gone from wg0 and the client could no longer handshake. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 21:38:12 +02:00
nexxo	32fa1028cc	fix(portal): cloud status labels for all instance states; scale storage curve into the quota ... Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 19:16:16 +02:00
nexxo	d05932105d	feat(portal): bind the cloud card to the real instance (plan/seats/domain/quota) so the maintenance badge matches it ... Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 19:14:42 +02:00
nexxo	a321d963d7	fix(portal): no silent no-ops without a customer; maintenance visible per instance; maintenance form redesign ... - ResolvesCustomer trait replaces 5 duplicated customer() lookups; portal actions now SAY why nothing happened (operator accounts have no Customer) instead of returning silently — the actual cause of 'dead buttons', '0/0 seats' and 'settings not saving' when signed in as admin - portal layout: explicit notice for a login without a linked customer - /cloud: per-instance maintenance badge + window details; seat note 'owner = seat 1' - maintenance form: sectioned card, hints, placeholder, styled datetime fields, grouped host picker with per-datacenter select-all + selection counter Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 19:10:44 +02:00
nexxo	88957f8f57	feat(auth): enterprise split login + signup (Fortify registration) via frontend-design ... - login/register redesigned as a split brand-panel + clean form (Apple-ish enterprise look), cross-linked; brand panel uses accent gradient + tokens - Fortify registration enabled; /register full-page Livewire + RegisterTest Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 18:16:27 +02:00
nexxo	be99f413f7	feat(admin): provisioning liveness — per-run progress bar, last-activity, stale warning ... Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-25 18:11:17 +02:00