- ConfigureWireguard and RemoveWireguardPeer mutate the hub too, and were not
taking the lock, so a sync could still read the interface around them and
write stale state. Both now hold wireguard:hub, which is what makes the
read/mutation guarantee actually hold.
- The duplicate-key check ran before the allocation lock, so two concurrent
creations with the same key both passed it and the loser hit the unique index
as an unhandled 500. The check moved inside the lock, with the index kept as
a caught backstop for any writer that does not take it — reproduced in a test
by inserting a colliding row from within the allocation call.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A sync could read the hub snapshot just before ApplyVpnPeer removed a peer and
purged its tombstone, then adopt what it had seen as a fresh enabled access —
restoring a revoked one. Both jobs now hold Cache::lock('wireguard:hub') around
read-decide-mutate, so a reconciliation can never straddle a removal. Retry
removals are dispatched after the lock is released, because the sync queue
driver runs them inline and they take the same lock.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
If an add job was retried after the access had been revoked and its tombstone
purged, it found no row and trusted its own enabled=true payload — re-adding a
key that no longer had a row anyone could revoke it with. A missing row can only
mean the access is gone, so the captured payload may now remove but never
enable.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two more from Codex:
- Addresses come from one subnet but live in two tables (hosts.wg_ip and
vpn_peers.allowed_ip), so a concurrent host onboarding and console creation
could each see the same address as free and both insert — neither unique
index sees the other. Creation now waits on Cache::lock('wireguard:allocate'),
the same lock ConfigureWireguard already holds while reserving a host address.
- mount() runs once, so revoking vpn.manage left an open tab polling every five
seconds and still receiving fresh peer state. Authorization now also runs on
hydration, which is what the poll goes through.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two lifecycle holes Codex found in the new VPN management:
1. Delete removed the row before the hub knew. If the removal job was delayed
or failed, SyncVpnPeers saw a peer it did not recognise and adopted it back
as a live access — silently restoring what an operator had just revoked, and
with no row left to revoke it again. Deletion is now a soft-delete
tombstone: the row survives until the hub confirms the peer is gone, the
sync retries the removal instead of adopting, and the tombstone is purged
only once the peer is really absent. It also keeps the key and the tunnel
address reserved meanwhile, so neither is handed out twice.
2. ApplyVpnPeer applied the state captured at dispatch. A retried block job
could therefore undo a later unblock, and nothing would repair it — the sync
only observes state, it never re-applies intent. The job now resolves the
current desired state from the row and treats its payload as a fallback for
the case where the row is already gone.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The console can now create, block and remove VPN accesses, and shows who is
actually connected — traffic counters, source endpoint and last handshake.
Design notes:
- The web container has no wg0, so the page never talks to WireGuard. Live
state is copied in by SyncVpnPeers on the provisioning queue (the only worker
whose container owns the interface); the page polls the database and merely
nudges that job, throttled so many open tabs cannot flood the queue.
- enabled (operator intent) and present (observed on the hub) are stored
separately, so a sync can never quietly undo a block and drift stays visible
as "wird angewendet".
- The sync adopts peers the host pipeline registered, naming them after their
host — otherwise "who is on the VPN" would have blind spots.
- Keypairs are generated in PHP via libsodium rather than shelling out to
wg genkey (no interface in this container, and it keeps generation testable).
The private key is shown once and never stored.
- allocateIp() now also considers vpn_peers, which would otherwise be handed a
tunnel address a host already holds.
- vpn.manage is a new capability held by Owner/Admin only, and it hides the nav
entry too — a VPN access reaches the management network.
Verified end to end against the real hub, not just mocks: created an access in
the browser, connected with the generated config, watched the console flip to
"Verbunden" with real counters, then blocked it and confirmed the peer was
gone from wg0 and the client could no longer handshake.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DNS names are case-insensitive and Symfony's getHost() always returns lowercase,
so ADMIN_HOSTS=Admin.Example.com rejected every request and locked operators
out. Normalised in the config AND at the comparison, so the value is safe
whichever route it took in (env, cached config, runtime set).
operator()/admin() moved from RbacTest/HostManagementTest to tests/Pest.php:
they were only loaded when those files happened to be in the run, so a targeted
single-file run died on 'undefined function operator()'.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Admin actions post to /livewire/update, which a path-scoped guard skips — an
operator session could drive admin components through a PUBLIC hostname despite
ADMIN_HOSTS. The restriction is now registered as Livewire-persistent middleware
and listed on the admin route group, so Livewire re-applies it from the
component snapshot.
Proven by replaying a snapshot taken from the real rendered page: identical
payload -> 404 on a public host, 200 on the allowed host (positive control, so
the test cannot pass for the wrong reason).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Proxmox fleet and the operator console must never be publicly reachable. The
primary control is the reverse proxy, but nginx here is a catch-all
(server_name _), so /admin was served on EVERY hostname — a proxy
misconfiguration would expose it. ADMIN_HOSTS pins it; any other host gets 404
(not 403: a public domain must not disclose that a console exists).
Prepended to the group instead of the admin route group on purpose: route
middleware is reordered by Laravel's priority list, which runs first — a
guest would then be redirected to /login and learn the console is there. Covered
by a test for exactly that case. Empty ADMIN_HOSTS = unrestricted, so nobody is
locked out by upgrading.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- MONITORING_ATTEMPTS is capped by the run's max_attempts, so a large value can
no longer burn the retry budget and fail the very provisioning the degradation
exists to protect (covered by a new test at the budget boundary)
- /health is now dependency-free (200 in ~2ms with Kuma absent, verified: the
container healthcheck stays healthy); Kuma state is exclusively in /ready
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- attempt is 0-based, so compare one-based: ATTEMPTS=2 really means two tries
- bridge accepts add_monitor returning {monitorID}|{id}|int (v1.2.1 returns a
dict — re-verified: first create on a fresh Kuma is HTTP 200 with the id)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Kuma has no write REST API (monitor CRUD is Socket.IO only), so docker/kuma-bridge
translates the exact generic REST contract HttpMonitoringClient already speaks —
no PHP client change needed. Opt-in compose profile 'monitoring'.
Verified end-to-end against a real Uptime Kuma 1.x:
create -> id, create again -> same id (idempotent), list, status, delete
and PHP MonitoringClient -> bridge -> Kuma round-trip.
The e2e run caught a real bug: add_monitor takes 'maxretries', not 'retries'.
Monitoring is now observability, not a delivery gate:
- RegisterMonitoring retries MONITORING_ATTEMPTS times on an outage, then
continues degraded with a visible 'info' event
- RunAcceptanceChecks no longer fails when monitoring isn't green (a fresh Kuma
monitor legitimately reports 'pending' — confirmed in the e2e run); it records
the gap instead. MONITORING_REQUIRED=true restores strict gating.
- docs/monitoring-uptime-kuma.md documents setup, failure behaviour, alternatives
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ResolvesCustomer trait replaces 5 duplicated customer() lookups; portal actions
now SAY why nothing happened (operator accounts have no Customer) instead of
returning silently — the actual cause of 'dead buttons', '0/0 seats' and
'settings not saving' when signed in as admin
- portal layout: explicit notice for a login without a linked customer
- /cloud: per-instance maintenance badge + window details; seat note 'owner = seat 1'
- maintenance form: sectioned card, hints, placeholder, styled datetime fields,
grouped host picker with per-datacenter select-all + selection counter
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- isOperator()/EnsureAdmin/broadcast fall back to is_admin so a legacy admin is
never locked out by a stale permission cache
- published modal: centered max-w-lg card (dynamic modalWidth class was purged
by Tailwind → full-width)
- datacenter edit moved to a modal (no row-height jump); location is now a
country dropdown (config/countries.php) instead of free text
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- 5 operator roles (Owner/Admin/Support/Billing/Read-only) seeded via migration
with a capability catalogue; app checks capabilities via Gate, never role names
- every mutating admin action authorizes server-side (hosts/datacenters/customers/
impersonate/provisioning); is_admin reads migrated to console.view / isOperator()
- admin /settings: own account + Owner-only staff invite/role/revoke with
last-owner, self-role and customer-collision guards (transactional)
- sidebar 'zum Kundenportal' link replaced with Settings
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The DB now refuses to orphan a host; datacenter delete pre-checks for a friendly
message and catches the constraint as the race backstop.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- seat limit follows the active/cancelling package, not a newer inactive record
- suspend/reactivate toggle refuses closed accounts (terminal); closed shown in list
- factory emails use a large unique numeric space (safeEmail pool could collide
late in a full suite run)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- seats table + model; Users page manages team members (owner auto-created)
- invite respects plan seat allowance + dedupe; role change + revoke guarded
so the last owner can never be removed or demoted
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- customers gain profile + branding + closed_at; instances gain cancellation
fields; branding resolver (NULL -> CluPilot defaults) snapshotted into the
provisioning run context
- cancel package: term-end, irreversible, typed-confirm modal (R5)
- close account: guarded (no active package), typed-confirm modal (R5)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- plans gain seats + performance class; customer views show storage/seats/
performance/features, no raw vCPU/RAM (admin keeps specs)
- billing: scoped wire:target + wire:key so one purchase no longer spins all
- chart island: line-colour->transparent gradient for filled line datasets;
MRR / backups / invoices bar charts converted to gradient line
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- customers.user_id unique so impersonation/billing can't cross customers
- HostCreate validates datacenter is active (exists rule + active=1)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- migration seeds fsn/hel + any host-referenced code so existing installs
keep selectable datacenters after upgrade
- Billing::customer() resolves via user_id, email only as legacy fallback
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Progress bar + X/total, highlighted current step, faint next step, failure
inline — replaces the long repetitive per-step 'done' list. Tactical-Terminal
tokens, DE+EN.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
datacenters table/model + admin CRUD (/admin/datacenters, nav). HostCreate
picks from active datacenters (validated); hosts show the datacenter code.
Seeded fsn/hel. 5 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clone recovery: once the lock clears but the task ref is lost, destroy the
possibly-incomplete VM and re-clone instead of advancing onto it.
- applyFirewall clears existing rules before adding, so retries don't accumulate
duplicate Proxmox firewall entries.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Nextcloud: parse occ status JSON (installed + not in maintenance).
- Admin: query occ user:info for the account.
- Monitoring: MonitoringClient::isHealthy checks the provider, not the local row.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TraefikWriter now targets the host that serves the traffic (DNS points at it):
SshTraefikWriter SSHes in and writes the file-provider YAML there. Interface
takes the traffic host + guest backend.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CompleteProvisioning scrubs admin_password whenever credentials_sent exists,
so a crash between recording and scrubbing can't leave the password in context.
- HttpMonitoringClient looks up an existing monitor by URL before creating one,
so a retry after a crashed POST doesn't create a duplicate external monitor.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clone recovery polls until the VM lock clears instead of advancing onto a
possibly-incomplete clone.
- RegisterBackup/RegisterMonitoring create the local row BEFORE the run-resource
breadcrumb, so a crash between them can't leave the row permanently missing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureCloudInit sets cores/memory from the plan (not the template default).
- RegisterBackup uses a deterministic Proxmox job id (ignore-exists) + firstOrCreate.
- RegisterMonitoring is idempotent by URL + firstOrCreate — no duplicate schedules
or monitors after a crash/retry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- applyFirewall sets policy_in=DROP so only 80/443 are exposed.
- Capacity/placement account for disk_gb (the real VM allocation), not the
smaller Nextcloud user quota — no systematic overcommit.
- CloudReady sent synchronously again; the step retries on mail failure with the
password preserved (no lost credential in a failed queue job).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CloudReady receives the ENCRYPTED password (decrypts only when rendering), so
the queued payload never holds plaintext.
- RegisterBackup uses a valid Proxmox calendar expression (02:00).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CreateCustomerAdmin puts OC_PASS on the docker invocation (survives the &&).
- RegisterBackup creates a real vzdump job via ProxmoxClient::createBackupJob.
- RegisterMonitoring registers via a new MonitoringClient service (interface +
fake + http). Both persist the external id [E] before the breadcrumb, so
acceptance reflects a real registration, not a fabricated row.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Accept checkout.session.async_payment_succeeded (async methods) and dedupe on
the checkout session id, not the event id.
- committedGb still counts a failed instance while its VM exists (has vmid);
releases quota only when no VM was created — no overcommit vs no leak.
- CloudReady is queued (durable). Credential delivery is documented at-least-once
(a rare duplicate welcome email beats a lost credential; exactly-once = v1.1 outbox).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Proxmox guest agent execs a program directly; our compound commands
(cd/&&/pipes/redirects/env) need an explicit shell.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clone: recover via vmExists() when the task ref was lost, instead of
re-cloning the reserved vmid (which Proxmox rejects).
- Deploy: persist the DB password ENCRYPTED before compose up and reuse it on
retry, so a crash can't regenerate a mismatching credential.
- Complete: gate credential delivery on a credentials_sent breadcrumb so a
retry after a crash doesn't re-send the email.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Failed run releases the instance (status=failed) so its quota stops counting
against host capacity.
- CompleteProvisioning activates instance+order only AFTER onboarding tasks +
credential delivery succeed.
- ConfigureNetwork polls until the guest has an address (no wrong Traefik route).
- customers.email unique + race-safe customer resolution in the intake action.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
RunRunner::onPoll no longer resets started_at, so a poll step's own deadline
(WaitForGuestAgent 270s, ConfigureDnsAndTls cert 840s) actually fires instead
of resetting every poll. maxDuration raised above each own-deadline so the
step's fail wins over the generic timeout. Shared core fix (A + B).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Require a real customer email (no unknown@ fallback merging customers).
- Stripe signature: enforce 5-min replay tolerance + accept any rotating v1.
- DeployApplicationStack no longer persists the DB password in the run context.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Stripe webhook fails closed when the signing secret is missing (outside local/testing).
- ReserveResources places + creates the instance under a per-datacenter lock so
concurrent orders can't overcommit a host.
- CloneVirtualMachine reserves the vmid + breadcrumb BEFORE cloning, so a crash
can't mint a new vmid and orphan the first clone.
- CreateCustomerAdmin checks user existence and resets the password instead of
re-running user:add on retry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Stripe: only checkout.session.completed with payment_status=paid (dedupes the
paired payment_intent event and blocks unpaid async sessions).
- Capture the guest IP (ConfigureNetwork) and point Traefik at the VM, not the
Proxmox host, so ACME/HTTP-01 can reach Nextcloud.
- Resize the disk to an absolute target (not '+…') so a retry can't double it.
(Codex #4 timeout was a false positive — started_at resets per step.)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Admin /admin/provisioning bound to real runs+steps (poll+admin.runs). Embedded
CustomerProvisioning card shows the logged-in customer their own run live
(per-customer StepAdvanced channel, email-bridged authz). Shared BuildsRunSteps.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed webhook (HMAC verify when secret set), CSRF-exempt route. Paid checkout
creates customer+order+run (stripe_event_id unique => duplicate webhooks start
one run) and dispatches. 5 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Prevents a second worker from consuming the follow-up job and bailing on the
still-held run lock, which would stall the run until the next scheduler tick.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Keeps the wg_peer resource gated on a verified handshake (idempotency) while
ensuring PurgeHost can always remove the hub peer, even on terminal failure.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureWireguard checks setup command results and only records the wg_peer
resource after the handshake verifies, so a transient setup failure re-runs
the full setup instead of getting stuck on the idempotent path.
- Host removal now deactivates immediately and queues PurgeHost, which deletes
runs under the runner lock (waiting out a long step) — no 15s LockTimeout error.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- PhpseclibRemoteShell sets a command timeout (default 2000s) so apt
full-upgrade/install don't hit phpseclib's ~10s default and fail.
- Host removal dispatches RemoveWireguardPeer to the provisioning queue, which
runs in the worker that owns wg0 (the web container can't manage WireGuard).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Image installs wireguard-tools/iproute2; the provisioning worker brings up
wg0 before queue:work so LocalWireguardHub can manage peers.
- ConfirmRemoveHost deletes each run under its run:<uuid> lock so an in-flight
worker can't keep mutating the server or write to a deleted run.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- RunRunner catches step-resolution errors (removed/renamed pipeline) and
fails the run terminally instead of looping forever every tick.
- queue-provisioning worker gains NET_ADMIN + tun + persistent wireguard
volume + published UDP port so LocalWireguardHub can manage wg0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Removing a host now removes its WireGuard hub peer so a freed wg_ip can't
route to the removed server via a stale peer.
- RebootIntoPveKernel clears reboot_issued/deadline when it times out, so the
manual retry action actually re-issues a reboot instead of failing instantly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
hub_ip is now defined in config (default: subnet .1), so a custom
CLUPILOT_WG_SUBNET no longer pings the wrong handshake target.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Dedicated 'provisioning' queue connection (retry_after 2400) + worker
(--timeout=2100); AdvanceRunJob tries=1, timeout=2100 on that queue.
- Run lock TTL raised to 2100s so a long step can't be run concurrently by a
duplicate tick-dispatched job.
- StartHostOnboarding creates host+run in a transaction, dispatches after commit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- RunRunner returns early for a waiting run whose next_attempt_at is in the
future, so stale/duplicate jobs can't bypass backoff.
- RegisterCapacity takes the largest VM-capable datastore instead of summing
overlapping pools (local + local-lvm), preventing placement overcommit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A retried step (manual or after a timeout) now gets a fresh started_at, so
RunRunner no longer immediately re-detects the timeout and burns the retry
budget without executing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- StepResult::poll — polling steps (reboot) wait without consuming the retry
budget; the step owns its deadline. Reboot maxDuration > deadline.
- Failed runs move a Host subject to 'error' via ProvisioningSubject hook
(no host stuck 'onboarding').
- ConfigureWireguard allocates + reserves the wg_ip under a global lock;
unique index on hosts.wg_ip as a backstop against duplicate addresses.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CreateAutomationToken now bootstraps the pveum role/user/token over the
authenticated SSH session (a fresh host has no API token yet); ProxmoxClient
is read-only in A.
- ConfigureWireguard re-verifies the handshake on the idempotent replay path,
never advancing over a dead tunnel.
- PhpseclibRemoteShell treats a missing SSH exit status as failure (255).
- connectWithKey verifies the pinned host key fingerprint on later logins.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Real hosts list, add-host form (StartHostOnboarding), host detail with live
progress stepper (Reverb + wire:poll fallback), retry failed run, remove via
wire-elements/modal (deregister only). DE+EN. 8 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Separate admin console at /admin, gated to is_admin users (EnsureAdmin middleware
+ migration/seed; a plain customer user is seeded to prove the gate). Distinct dark
aesthetic achieved purely by token scoping: .theme-admin overrides every CSS design
token to a dark graphite / signal-orange palette, so ALL shared components (button,
card, badge, table, stat, chart) render dark with zero new markup (R3). Chart island
now reads tokens from its own element, so charts are theme-aware.
Sections (each full-page class-based Livewire, English routes R13, localized DE/EN):
- Overview: fleet KPIs, fleet-growth line, host-load bars, MRR bars, active runs, alerts.
- Customers: table + plan doughnut. Instances: fleet table (vmid/host/storage).
- Hosts: capacity cards (storage/CPU bars). Provisioning: runs table + live stepper.
- Revenue: MRR/ARR/ARPU/churn KPIs, MRR line, plan doughnut, recent payments.
- Locale-aware month labels/currency (Carbon/Number).
18 new Pest tests (guest redirect / non-admin 403 / admin render per section) → 44
green. R12 browser: all six admin pages HTTP 200, ZERO console errors (Chart.js dark).
Codex (R15) — clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Chart.js as an Alpine island (x-ui.chart): configs are PHP arrays; colours use
token: strings resolved from CSS design tokens at runtime (R3). Respects
reduced-motion; IBM Plex chart defaults.
- Tokens: soft --radius-xl (20px), --success-bright for dots/rings/charts.
Staggered 'rise' reveal keyframe. Global toast in the app shell.
- Overview rebuilt to the customer template: storage doughnut ring, availability
sparkline, KPI tiles, upsell, cloud card, interactive onboarding checklist
(Alpine), backups, modules (Lucide icons — no emoji, R9), activity feed.
- Locale-aware fixture display: Carbon isoFormat dates + Number::format sizes so
the EN dashboard is not mixed-language (R16).
- 14 Pest tests green; R12 browser: /dashboard 0 console errors with Chart.js;
R7 no overflow at 375/768/1280. Reviewed with Codex (R15) — clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
nexxo