Impersonation borrows the customer's portal session; this is access to their
installation, which is a different thing and now a different button.
Nextcloud has no passwordless admin jump, so this does the only honest thing it
offers: it resets OUR managed admin account inside that installation and hands
the credentials over once. The customer's own accounts are untouched, and the
next request sets a new password again.
- New capability instances.adminlogin, Owner and Admin only — stronger than
impersonation, because it hands over control rather than a session.
- The operator's own password is required every time, rate-limited: taking over
a customer's installation is not something an unattended browser should manage
on its own.
- The reset runs on the provisioning worker (it owns the tunnel and the Proxmox
credentials); the console polls a handoff token, so the credentials never
enter a Livewire snapshot.
- A silent instance is reported as such instead of appearing to succeed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
"5 purchases pending" told nobody what they had ordered and offered no way to
change their mind. The billing page now lists each pending purchase by name,
what it costs, when it was added, and the total — with a remove button per row
behind a confirmation, like every other destructive action in the console.
The wording lives on the Order model rather than in the view, so the cart, the
invoice list and any later confirmation mail cannot each invent their own name
for the same row. Removal is scoped to the customer's own still-pending orders,
checked in the modal itself: modals are reachable without the page's guards.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
An access created without storing its config had no download button and no
explanation — it looked broken. It now shows a dimmed button that says why
(the private key only exists on your device), and every staff access gets
"Re-issue": a new keypair, old key off the hub before the new one goes on,
so two peers never claim the same tunnel address at once. A stored config is
re-encrypted in step, or the owner would download a key the hub no longer
accepts.
Host peers are excluded: their key belongs to the machine's own wg0, and
swapping it here would cut the host off with nothing left to repair it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three things that bit us on every deploy:
- artisan down now renders a branded page that says an update is running and
reloads itself, instead of Laravel's bare 503.
- A page left open across a deploy carries a Livewire snapshot and CSRF token
the new code rejects — the user got "419 Page Expired" and a dead interface.
A 419 from a /livewire/ request now reloads the page; the session is still
valid, so that is all it takes. Hooked at the fetch layer rather than through
Livewire's request hook, whose failure callback is not invoked for this case
in the installed version — verified against a real 419 in the browser, not a
simulated one.
- Vite no longer empties its output directory: wiping it is what left an open
page without its stylesheet mid-deploy, which is the "design is completely
broken" symptom. update.sh also rebuilds the caches with optimize:clear +
optimize instead of leaving them half-warm.
Plus CI: .gitea/workflows/tests.yml (Pest + asset build, and a tested- tag only
on a green main) and an opt-in act_runner service under the ci profile.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The banners sat outside the h-screen shell, so the page scrolled and the content
scrolled — two scrollbars whenever a maintenance window was active.
Maintenance notices are now a bell with a count in the header, next to the user
menu that was otherwise the only thing up there. Impersonation stays visible as
a header chip rather than moving into the dropdown: it is a mode, not a notice,
and acting as someone else without noticing is how mistakes happen.
Also: the VPN status pill wrapped onto two lines in a narrow column.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Customers can now see what they have used and what is left, and the service
slows down rather than stopping when the allowance is gone — a slow Nextcloud
gets a top-up, a dead one gets a cancellation.
- instance_traffic keeps one row per instance per month. Proxmox counters are
cumulative since the VM last started, so usage is the difference between two
samples, and a counter that went backwards means a restart, not a refund.
- Outbound is what counts: inbound is free at our providers and egress is what
Hetzner's 20 TB per server applies to.
- CollectInstanceTraffic samples every 15 minutes, warns once per threshold
(80/95 %) rather than on every run, and at 100 % limits the VM's NIC via
Proxmox — released again as soon as the customer tops up or the month rolls
over.
- The dashboard gets a full-width band (it throttles the service, so it is not
a tile among tiles) with the top-up offer right next to the warning.
- Bytes are formatted in SI units now: allowances are computed in SI, so
dividing by 1024 made a 1000 GB plan read as "931 GB".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
While the product is still being built, the marketing site and the customer
portal should not be reachable — but they must stay reachable for us.
- A toggle in the console (site.manage, Owner/Admin) stored in a new
app_settings table, because this has to be flippable without a deploy.
- Outsiders get a placeholder with 503 + noindex, not 200: a 200 invites search
engines to index the placeholder as the site's content, which is far harder
to undo than to prevent.
- Anyone on the management VPN, and any signed-in operator, sees the real site.
The console, Livewire's endpoint, the Stripe webhook and the health check are
always reachable — otherwise the switch could only be flipped once.
- robots.txt is generated by the app and follows the switch. It had to stop
being a static file: nginx short-circuited it and Laravel's stock file said
'Disallow:' with an empty value, so crawlers were never told anything.
- Settings reads fall back to the default when the table is unavailable. The
gate reads one on every request, so a deploy running new code before migrate
would otherwise answer the entire site with a 500.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The action labels wrapped to two lines and crushed the column — now icon
buttons with tooltips, like every other admin table. The form column was too
narrow for its content: the datetime fields silently clipped their own value,
so they are stacked and full width now, with duration chips because typing an
end timestamp by hand is the fiddliest part of the form. Host rows show a real
selected state and a per-datacenter count, and the impact column says
"1 Host · 1 Kunde" instead of "Host(s) · Kunde(n)".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reworked after a design consultation with Codex, which pushed back on my first
proposal in three useful ways.
Ownership and rights:
- vpn.manage split into vpn.view.all and vpn.manage.all. Seeing an access is
not managing it, and neither is holding its private key.
- Record-level rules live in VpnPeerPolicy, not in permissions: an access
belongs to a person, and ownership is what grants sight of it. Every operator
reaches the page, but sees only their own unless they may see all.
- Issuing an access is not self-service — it reaches the management network, so
it needs vpn.manage.all even for oneself.
- New Developer role: sees everything, manages nothing. Writing code does not
imply authority over other people's access.
- kind (staff|host|system) replaces a null user_id that had to mean two
different things at once.
Config storage, opt-in per access:
- Downloading is owner-only — explicitly NOT for view.all or manage.all. An
admin who needs access revokes this one and issues their own, which keeps the
record of who holds what honest.
- The password is asked on EVERY retrieval, rate-limited. Laravel's
password.confirm keeps a 15-minute session stamp, which would authorise
unlimited later downloads from an unattended browser.
- Stored under VPN_CONFIG_KEY, not APP_KEY: a leaked application key must not
also hand over the management network. Purged on revocation and when a staff
member is revoked — console taken away, tunnel left open was the worst case.
- The plaintext never enters a Livewire snapshot (the page polls every five
seconds); the component carries an opaque handle instead.
Also: copy button works without HTTPS again (navigator.clipboard only exists in
a secure context, so over http it silently did nothing), plus config download
as a file and a QR code for the mobile apps.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- A host's wg_pubkey may not be in vpn_peers yet, so the duplicate check passed
and an operator could create an access with it. ApplyVpnPeer would then run
wg set with a freshly allocated address, rewriting that host's allowed-ip and
cutting CluPilot's management tunnel to a live machine. Creation now rejects
keys already held by a host, checked under the allocation lock.
- A sync landing between addPeer() and the step storing wg_pubkey adopted the
peer as "unknown", and a later sync filled in host_id but left the name, so
the page showed that host as unknown forever. The name is now filled in when
the link becomes known — only for sync-adopted rows, so an access an operator
named keeps its name.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two lifecycle holes Codex found in the new VPN management:
1. Delete removed the row before the hub knew. If the removal job was delayed
or failed, SyncVpnPeers saw a peer it did not recognise and adopted it back
as a live access — silently restoring what an operator had just revoked, and
with no row left to revoke it again. Deletion is now a soft-delete
tombstone: the row survives until the hub confirms the peer is gone, the
sync retries the removal instead of adopting, and the tombstone is purged
only once the peer is really absent. It also keeps the key and the tunnel
address reserved meanwhile, so neither is handed out twice.
2. ApplyVpnPeer applied the state captured at dispatch. A retried block job
could therefore undo a later unblock, and nothing would repair it — the sync
only observes state, it never re-applies intent. The job now resolves the
current desired state from the row and treats its payload as a fallback for
the case where the row is already gone.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The console can now create, block and remove VPN accesses, and shows who is
actually connected — traffic counters, source endpoint and last handshake.
Design notes:
- The web container has no wg0, so the page never talks to WireGuard. Live
state is copied in by SyncVpnPeers on the provisioning queue (the only worker
whose container owns the interface); the page polls the database and merely
nudges that job, throttled so many open tabs cannot flood the queue.
- enabled (operator intent) and present (observed on the hub) are stored
separately, so a sync can never quietly undo a block and drift stays visible
as "wird angewendet".
- The sync adopts peers the host pipeline registered, naming them after their
host — otherwise "who is on the VPN" would have blind spots.
- Keypairs are generated in PHP via libsodium rather than shelling out to
wg genkey (no interface in this container, and it keeps generation testable).
The private key is shown once and never stored.
- allocateIp() now also considers vpn_peers, which would otherwise be handed a
tunnel address a host already holds.
- vpn.manage is a new capability held by Owner/Admin only, and it hides the nav
entry too — a VPN access reaches the management network.
Verified end to end against the real hub, not just mocks: created an access in
the browser, connected with the generated config, watched the console flip to
"Verbunden" with real counters, then blocked it and confirmed the peer was
gone from wg0 and the client could no longer handshake.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ResolvesCustomer trait replaces 5 duplicated customer() lookups; portal actions
now SAY why nothing happened (operator accounts have no Customer) instead of
returning silently — the actual cause of 'dead buttons', '0/0 seats' and
'settings not saving' when signed in as admin
- portal layout: explicit notice for a login without a linked customer
- /cloud: per-instance maintenance badge + window details; seat note 'owner = seat 1'
- maintenance form: sectioned card, hints, placeholder, styled datetime fields,
grouped host picker with per-datacenter select-all + selection counter
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- isOperator()/EnsureAdmin/broadcast fall back to is_admin so a legacy admin is
never locked out by a stale permission cache
- published modal: centered max-w-lg card (dynamic modalWidth class was purged
by Tailwind → full-width)
- datacenter edit moved to a modal (no row-height jump); location is now a
country dropdown (config/countries.php) instead of free text
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- 5 operator roles (Owner/Admin/Support/Billing/Read-only) seeded via migration
with a capability catalogue; app checks capabilities via Gate, never role names
- every mutating admin action authorizes server-side (hosts/datacenters/customers/
impersonate/provisioning); is_admin reads migrated to console.view / isOperator()
- admin /settings: own account + Owner-only staff invite/role/revoke with
last-owner, self-role and customer-collision guards (transactional)
- sidebar 'zum Kundenportal' link replaced with Settings
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- seat limit follows the active/cancelling package, not a newer inactive record
- suspend/reactivate toggle refuses closed accounts (terminal); closed shown in list
- factory emails use a large unique numeric space (safeEmail pool could collide
late in a full suite run)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- seats table + model; Users page manages team members (owner auto-created)
- invite respects plan seat allowance + dedupe; role change + revoke guarded
so the last owner can never be removed or demoted
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- customers gain profile + branding + closed_at; instances gain cancellation
fields; branding resolver (NULL -> CluPilot defaults) snapshotted into the
provisioning run context
- cancel package: term-end, irreversible, typed-confirm modal (R5)
- close account: guarded (no active package), typed-confirm modal (R5)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- plans gain seats + performance class; customer views show storage/seats/
performance/features, no raw vCPU/RAM (admin keeps specs)
- billing: scoped wire:target + wire:key so one purchase no longer spins all
- chart island: line-colour->transparent gradient for filled line datasets;
MRR / backups / invoices bar charts converted to gradient line
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Progress bar + X/total, highlighted current step, faint next step, failure
inline — replaces the long repetitive per-step 'done' list. Tactical-Terminal
tokens, DE+EN.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
datacenters table/model + admin CRUD (/admin/datacenters, nav). HostCreate
picks from active datacenters (validated); hosts show the datacenter code.
Seeded fsn/hel. 5 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Admin /admin/provisioning bound to real runs+steps (poll+admin.runs). Embedded
CustomerProvisioning card shows the logged-in customer their own run live
(per-customer StepAdvanced channel, email-bridged authz). Shared BuildsRunSteps.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Real hosts list, add-host form (StartHostOnboarding), host detail with live
progress stepper (Reverb + wire:poll fallback), retry failed run, remove via
wire-elements/modal (deregister only). DE+EN. 8 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Separate admin console at /admin, gated to is_admin users (EnsureAdmin middleware
+ migration/seed; a plain customer user is seeded to prove the gate). Distinct dark
aesthetic achieved purely by token scoping: .theme-admin overrides every CSS design
token to a dark graphite / signal-orange palette, so ALL shared components (button,
card, badge, table, stat, chart) render dark with zero new markup (R3). Chart island
now reads tokens from its own element, so charts are theme-aware.
Sections (each full-page class-based Livewire, English routes R13, localized DE/EN):
- Overview: fleet KPIs, fleet-growth line, host-load bars, MRR bars, active runs, alerts.
- Customers: table + plan doughnut. Instances: fleet table (vmid/host/storage).
- Hosts: capacity cards (storage/CPU bars). Provisioning: runs table + live stepper.
- Revenue: MRR/ARR/ARPU/churn KPIs, MRR line, plan doughnut, recent payments.
- Locale-aware month labels/currency (Carbon/Number).
18 new Pest tests (guest redirect / non-admin 403 / admin render per section) → 44
green. R12 browser: all six admin pages HTTP 200, ZERO console errors (Chart.js dark).
Codex (R15) — clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Chart.js as an Alpine island (x-ui.chart): configs are PHP arrays; colours use
token: strings resolved from CSS design tokens at runtime (R3). Respects
reduced-motion; IBM Plex chart defaults.
- Tokens: soft --radius-xl (20px), --success-bright for dots/rings/charts.
Staggered 'rise' reveal keyframe. Global toast in the app shell.
- Overview rebuilt to the customer template: storage doughnut ring, availability
sparkline, KPI tiles, upsell, cloud card, interactive onboarding checklist
(Alpine), backups, modules (Lucide icons — no emoji, R9), activity feed.
- Locale-aware fixture display: Carbon isoFormat dates + Number::format sizes so
the EN dashboard is not mixed-language (R16).
- 14 Pest tests green; R12 browser: /dashboard 0 console errors with Chart.js;
R7 no overflow at 375/768/1280. Reviewed with Codex (R15) — clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
nexxo