Correctly rejected: the last pass was the old page in new paint. It kept the
skeleton — eight numbered sections, a split hero, a twelve-row comparison
matrix — and changed only the palette. A palette is not a design.
What is actually different now:
- The § numbering is gone. Numbered sections with a drawn rule are a document
convention, and the document voice is exactly what the product's design
system dropped.
- The hero shows the product instead of describing it: centred type, then a
wide panel built from the real console's own tokens, cropped by the section
below. The old hero put a table of facts beside the headline, so a visitor
read two columns before seeing anything.
- Six identical cards, then six more, then six more became one asymmetric
grid — a large panel, a dark tile, an accent tile, a wide module row — so
the important thing is allowed to be bigger than the rest.
- The industries are one dense two-column list instead of six cards repeating
each other's shape.
- The page has one dark hinge in the middle (the deployment) rather than a
dark section among seven light ones.
- The evidence table became rows that pair the measure with the piece of
paper you can hand somebody, which is what it is for.
- Prices are cards, with the full matrix folded away underneath. The matrix
used to be the first thing a visitor met: twelve rows of ticks before a
single price was legible.
- The FAQ heading sits still while the questions scroll past it.
- The footer is a real footer.
The header is a floating bar rather than a full-width band, and opaque in
both states — translucency plus backdrop-blur reads as a rendering fault over
the dark panels that scroll under it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Reported plainly: the site is still in the old style. It was — it was the
last of the three surfaces the token file describes that had never been
converted. landing.blade.php carried its own complete design system inside a
<style> block: warm paper, IBM Plex Serif headlines, 3px corners, its own
scale of greys, written before the tokens existed. Somebody who clicked
"Anmelden" left one company and arrived at another.
The page now draws from resources/css/portal-tokens.css like the portal and
the console: same surfaces, same radii, same button hierarchy, same
small-caps label, one family at weight 700 instead of a serif. What still
differs is rhythm, which is what a marketing page is allowed to differ in.
Content is unchanged. New: components/layouts/site.blade.php holds the header
and footer for every public page, and legal.blade.php uses it too — the
imprint used to be a stranded card in a third style again.
Two things found on the way:
- .lbl set `color: var(--muted)`, which is not a token. An undefined var() in
`color` computes to `unset`, so every small-caps label on every surface was
whatever colour its container happened to be.
- The big figures were set in mono. Mono gives the decimal comma a full glyph
cell, so "99,95" read as three separate numbers.
coming-soon and the status page stay self-contained on purpose — both are
served when the application may not have a built stylesheet at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Asked for directly: "später wenn ich etwas lokal erweitere will ich mich
nicht auf alle adminseiten einloggen müssen und extra rsync installieren".
An update runs as the service account, so anything root-owned on the host is
out of its reach and turns into "log into every server once and paste this".
The obvious fix — sudo on deploy/install-agent.sh — is not a grant at all:
the service account owns the checkout and can rewrite the very script it
would be allowed to run as root.
So the privileged part is written OUT of the checkout by install-agent.sh, to
/usr/local/sbin/clupilot-host-step, root:root 0755, from a quoted
here-document. The service account cannot influence a byte of it. sudoers
names one exact command line including its argument, so a step added to the
helper later is not covered by a grant written before it existed, and the
helper refuses anything not on its own list as well.
update.sh uses it only when rsync is actually missing, after the restart and
never fatally: the archive is collected hours later, and an update that died
over a package would be the bigger problem. A helper older than the steps the
updater wants is reported through the existing one-time-setup hint — silently
doing nothing is worse than an error.
Existing servers still need `sudo bash deploy/install-agent.sh` once, because
that is the run that puts the helper there. After it, they do not.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Reported from live: pressing update showed a blue panel first, which then
vanished and was replaced by a completely different "we are updating"
screen. Both were mine. The console drew its own overlay in the app's light
tokens; a moment later the containers went down and Laravel's 503 page took
over with its own standalone styling. One event, two faces, swapping while
an operator watches.
There is now one panel — resources/views/partials/updating-panel.blade.php —
rendered by both. It carries its own inline CSS and cpu- prefixed class
names because the 503 page is served with the application down: no compiled
stylesheet, no Tailwind, nothing but what is in that file. Dark mode comes
from prefers-color-scheme for the same reason.
The operator detail (step, running since, log tail) rides inside the panel
behind a flag, since the same file is shown to customers on the 503 page.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Setting a NAS up to collect the invoice archive meant three machines and a
dozen commands: generate a keypair there, carry the public half to the server,
write it into authorized_keys with a restriction, install rsync, and get every
path right on the first try. Every one of those steps was a place to be told
"permission denied" with no clue which of the three was wrong. It was, and
several times over.
One button now. The panel asks, the host does it — because the host is where
all of it lives: the home directory, ssh-keygen, rrsync, and the archive itself.
The panel is www-data in a container and owns none of that, so it uses the
mailbox it already uses for updates. The private half is shown exactly once,
alongside the finished rsync command, and is never written to the database: it
exists to be copied into a NAS, and storing it "for convenience" would put a
working credential in every backup of that database.
rrsync does the restricting, not a pinned rsync option string. That string
differs between rsync versions and fails silently — a refusal with no reason
given, which is the shape of the afternoon this replaces. If rrsync is missing
the agent refuses rather than issuing an unrestricted key while the panel says
it is restricted.
rsync now comes with install-agent.sh, which already runs as root once per
machine. It has to be on the HOST: a NAS connects by ssh and sshd starts
`rsync --server` here, so without it the pull fails with "command not found"
from a NAS whose own setup is perfectly correct.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
storage/archive is runtime output, and on a real server it is a mount point.
Committing it would put customer documents into git and make a deploy fight the
archive for the directory.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Reported as "the folder arrives empty". It was not empty. The folder was 0700
and owned by the account that wrote it, so the account that COLLECTS — an rsync
over ssh, a backup agent, anything that is not the writer — could not enter it,
and an unreadable directory looks exactly like an empty one. The invoice had
been sitting in it the whole time.
The cause is that the default follows the process umask, so under a restrictive
one 0755 quietly becomes 0700. The permissions are declared on the disk now
rather than left to inherit, and a test writes under umask 0077 and asserts the
mode — the ordinary umask hides this completely, which is why it was found on a
server and not here.
Two mistakes of mine on the way to it, both worth recording. I read the folder
as the wrong user, got no entries back, and concluded the file had been deleted
— it was a permission failure reading as an unprivileged account, not a missing
file. And the first fix was a chmod on a variable that does not exist in that
method, silenced by an @ so it failed without a word. Flysystem takes its
permissions from configuration; a chmod afterwards was the wrong layer even
before it was the wrong variable.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Everything was built — numbering, the frozen snapshot, the PDF, the mail, the
archive and its retention — and none of it was connected to anything. IssueInvoice
was called from nowhere but its own tests. So on a real server no invoice had
ever been created, the handover directory was empty, and rsync was correctly
copying nothing. Reported as "nothing gets copied", which it was.
One mail, not two. The invoice is issued the moment the payment lands, so an
order confirmation and an invoice mail would otherwise go out in the same second
for the same event — a defect rather than a preference. The invoice mail carries
the document and says everything the confirmation said, so it replaces it
whenever there is an invoice; the confirmation stays for when there cannot be
one.
Issuing is allowed to fail without taking the purchase with it. IssueInvoice
refuses while the company details are incomplete, and that refusal is correct —
an invoice without a registered name or a VAT number is not a valid invoice, and
issuing one consumes a number that can never be handed out again. The order
still stands, the machine is still built, and the invoice can be issued later.
Nothing here may throw at the webhook either: Stripe retries anything that is
not a 2xx, and a retry would re-enter provisioning and build a second machine
over a missing VAT number.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two destinations doing two jobs. A handover directory a NAS collects from wants
a folder per day and wants emptying — thirty days is enough to notice a NAS that
stopped collecting, and keeping more only hides it. An archive on the NAS itself
wants a folder per year and wants nothing deleted, ever. So both are per
destination rather than global.
Deleting is safe here in a way it usually is not, and that is worth saying
plainly: the invoice is a frozen document in the database and its PDF is
rendered from that on demand. Nothing is moved anywhere — it is copied, and
anything removed from a directory can be produced again and re-exported. The
directory is a handover point, not the record.
keep_days is null by default and stays null unless somebody sets it: a retention
rule nobody asked for is a deletion nobody expected. The prune only touches
folders whose NAME is one of the two shapes this application writes, and leaves
everything else alone — a prune that deletes what it does not recognise is how
an archive loses something nobody was watching. It also skips a destination
whose path is missing rather than acting on whatever is underneath an absent
mountpoint.
The shape is matched with a pattern before parsing rather than by handing
nonsense to Carbon: under strict mode createFromFormat throws instead of
returning false, so one folder somebody made by hand would have ended the whole
prune instead of being skipped. The test with a foreign folder in it found that.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A destination is a kind of connection, not a product. The wording said "Hetzner
Storage Box" and the host field suggested one particular provider's hostname
format, which reads as a requirement rather than an example — and the whole
point of the directory kind is that whatever is behind it is nobody's business
here.
Both kinds stay. A directory is how an NFS 4.1 mount is used: the mount is made
on the server, and the application writes into the path it produces. SFTP is for
a destination that is not mounted.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The first version put it in the credential vault. The vault refuses it, and
correctly: it keeps a registry of fixed, documented credentials so the Secrets
page can describe each one, and a per-destination password is not that. Forcing
a dynamic key into that registry would have made the registry meaningless.
Encrypted onto the row with the same cipher instead — the same key, so it is no
more readable in a database dump than anything the vault holds, and it lives
with the record it describes. A rotated SECRETS_KEY now says so by name rather
than surfacing as an authentication failure against a host that is perfectly
fine.
Also answers the question that prompted this: the host, port and user fields are
there, and appear once SFTP is chosen. A mounted directory has no host on
purpose — the mount is made on the server with mount(8), and the application
only names the directory it writes into. A test asserts both halves, because
"the fields are there, you just cannot see them yet" is not something anybody
should have to take on trust.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
One path and one exported_at could not say "on the office NAS, not yet on the
off-site box" — which is the only interesting question once there is more than
one destination, and the reason for a second is precisely that any single one
can fail. A row per destination now, and a row per (invoice, destination) pair.
Two kinds, and the difference is where the protocol lives. 'local' is a
directory this machine can already write to: a NAS mounted over NFS 4.1, a bind
mount, a disk. The application knows nothing about the protocol, the target
changes without code changing with it, and the whole thing stays testable
against a temporary directory. 'sftp' is for something reachable with
credentials — a Hetzner Storage Box being the obvious one — and the password
goes into the secret vault with only its key on the row, because a credential
in a settings table is a credential in every database dump. An empty password
field on an existing target means unchanged, not cleared: the field cannot show
what is stored, so blank-means-delete would wipe it on every unrelated edit.
One job per pair rather than one per invoice. A job writing to both would retry
the one that worked every time the other did not, and report one outcome for
two different things.
The ordering fix the tests found: Laravel's local adapter creates its root when
it is CONSTRUCTED, so the "never create the root" guard was checking a
directory the disk had just made for it. It runs before the disk is built now.
That guard is the difference between an archive and a hole in the ground — mkdir
on an absent mountpoint succeeds, writes onto the container's own disk and
reports success, and an archive that silently is not the archive is worse than
none.
The single path from the previous commit is migrated into a destination called
"Archiv" rather than dropped.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The application knows nothing about NFS and should not. It writes to a
directory; whether that is a local disk, a bind mount or a NAS over NFS 4.1
belongs to the mount. No protocol library, the target changes without code
changing with it, and the whole thing is testable against a temp directory.
The finding that shaped it: mkdir -p on a path whose mount is NOT there
succeeds. It creates the empty directory beneath the mountpoint, writes the
invoice onto the container's own disk and reports success — so an unmounted NAS
would quietly collect invoices locally while every check said it worked. An
archive that silently is not the archive is worse than none. The root is
therefore never created, only used: a missing root means a missing mount, and
that is a failure. Only the year subdirectory is created, inside a root already
proven to exist.
Written to a .part and renamed. A rename within one filesystem is atomic, so
whatever watches that folder never sees a truncated PDF and takes it for a
finished invoice. The size is read back afterwards rather than the write being
trusted: over a network mount a short write can report success, and an archive
of truncated files looks exactly like one that worked.
Queued, not done during the request. A network mount can block for its whole
timeout, and an invoice must not fail to be issued because a NAS is rebooting.
Dispatched after the commit, or a worker could look for an invoice that has not
landed yet.
And copy-on-issue is not enough on its own: an invoice issued while the office
connection was down never arrives, the queue eventually gives up, and nobody
opens an archive to check whether last Tuesday is in it. An hourly sweep
re-queues whatever is still missing, the failure is recorded on the invoice
rather than only in a log, and the Finance page says how many are outstanding.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
DisplayTimezoneTest went red on main: the year filter formatted issued_on
without ->local(). A year looks timezone-proof until New Year's night,
when the UTC year is still the previous one and the filter offers a year
the operator has already left. R19 is absolute for exactly that reason.
Read-only by design, and the absence is the feature: an issued invoice is
corrected by cancelling it and issuing another, which is the only lawful way to
correct one. There is no edit button here whose absence needs explaining, and a
test asserts there is none.
The PDF is a plain route rather than a Livewire action. A download is a
download, and routing one through a component round-trip only adds a way for it
to fail.
Two findings on the way, and both were mine.
The year filter used YEAR() in raw SQL, which is MySQL's. SQLite has no such
function, so the page worked against the real database and threw against the
test one — a query that only runs on one engine makes the test database a
different product from the one being shipped. The years are derived in PHP now.
And a test put a User on the operator guard, where EnsureAdmin calls isActive()
on it and a 403 becomes a 500. Not a code defect: actingAs() calls
Auth::shouldUse(), so a second actingAs() in the same test with no guard named
lands on whichever guard the FIRST one named. That trap is written up in
CLAUDE.md, I quoted it earlier today, and I walked into it anyway. The tests are
split now and both name their guard.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The PDF is rendered when the mail goes out rather than fetched from anywhere,
because nothing stores it — and rendering from the frozen snapshot means the
attachment is the document as issued no matter when the queue gets to it or how
often it retries. fromData rather than fromPath: there is no path.
Three attempts at testing it, and the first two were wrong in ways worth
recording. Attachment::$data does not exist — the closure lives in a protected
$resolver, and reaching for it was me testing the framework's internals rather
than my own code. And a byte comparison of the PDF cannot work at all: TCPDF
embeds a creation time and a document id, so two renders of one invoice differ.
Split into the two things that can actually go wrong. The mail carries an
attachment with the right filename and type — that is metadata, and it is
asserted as metadata. And the renderer produces a real PDF rather than an empty
one, asserted where the renderer is, because an attachment closure that returns
nothing still makes a perfectly valid mail with a nought-byte file on it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
One invoice per purchase rather than per order: a customer who buys a plan and
two add-ons in one go has bought once, and three invoices for one purchase is
three times the paperwork for the same money. Each order becomes a line, which
is also how the add-ons get listed individually.
Everything the document says is copied into the snapshot at the moment the
number is assigned — issuer, recipient, lines, rate, the reason for the rate.
A test changes the company name and the customer name afterwards and asserts
the invoice still says what it said. That is the whole reason no PDF is stored.
The number and the invoice commit in one transaction. A number taken and then
lost to a failure is a gap in a series that must not have one, and the refusal
test asserts that a rejected invoice leaves the counter where it was.
It refuses outright until the company details are complete. An invoice without
a registered name, an address or a VAT number is not a valid invoice here, and
issuing one consumes a number that can never be handed out again.
VAT comes from TaxTreatment, which already existed and already handles a
verified EU VAT ID correctly — including the reverse-charge note, without which
a zero-rated invoice says nothing about why no VAT was charged.
The billing address is carried as the lines it was written as. It is one
free-text field today, and guessing which line is the postcode would put it
where the street belongs, on a document nobody can correct afterwards.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The Finance tab wrote a rate into settings while TaxTreatment kept reading one
from config — two sources for one number, added by me two commits ago. It had
not bitten yet only because both happened to say 20.
TaxTreatment now takes the domestic rate from CompanyProfile, which falls back
to the .env-derived config until an operator saves one. Same shape as
ProvisioningSettings, which already solves this for the deployment values, and
the same reason: an operator can change a settings page and cannot change a
config value, so a page that appears to set the rate and does not is worse than
no page at all.
Reverse charge and the seller country stay where they are. That logic already
existed, already handles a verified EU VAT ID correctly, and nothing here
needed to know about it — which is exactly why it should not have been
duplicated.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Second correction to the same block, and this one came from the right place: a
line reading 202,50 beside "Rabatt 10 %" does not say whether the discount is
in that number or still to come. It was unreadable, and unreadable on the one
figure a customer checks.
Lines are at full price now. Discounts are still entered per line — that is
where they belong and where somebody decides them — but they are summed and
shown once, in euros, under a subtotal that the "Gesamt netto" column adds up
to. Subtotal, one subtraction, VAT, total: a sum anybody can follow without
being told which figures are already adjusted.
The gross line-total column is gone and a gross UNIT price takes its place.
Full-price gross totals would sum to 315,60 against a total of 288,60 — the
same contradiction in a different column. Nobody adds up unit prices, and a
consumer reading this wants to know what one of the things costs.
lineTotal() and adjustmentLabel() went with it. Nothing calls them any more,
and a helper kept for a layout that no longer exists is the next person's
wrong turn.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
With one discount applied under the table, the gross column summed to 315,60
against a total of 284,04. Nothing was miscalculated — the discount simply came
after — but a reader who adds up a column found a document that does not agree
with itself, and no way to tell which figure was the real one. On an invoice
that is not a presentation detail.
A discount or surcharge now sits on its line, percentage or fixed amount, and
is inside that line's total. The label under the line is built from the same
value that did the arithmetic, so the words cannot end up describing a
different number than the one printed beside them.
The invoice-wide adjustment stays in the arithmetic for anything that genuinely
applies to the whole document, but nothing uses it by default.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Everything the console has no field for is still real — MAIL_*, DB_*,
APP_KEY, whichever key nobody has built a form for yet — and without a way to
touch it from here, the operator needs a shell and the console page misses
its own point. EnvFileEditor is the net, not just the warning:
1. Validates before writing. A line that is neither blank, nor a comment, nor
KEY=value is rejected outright, and an empty file (syntactically "valid" by
that rule, but not survivable) is refused too. write() never touches the
file before checking the new content.
2. Backs up before every write that actually happens — a timestamped copy
beside .env, before the new content lands. Never pruned automatically; the
page says so, next to where it says where they land.
3. Names the keys a mistake here can lock an operator out with — APP_KEY,
DB_*, REDIS_*, SESSION_* — rather than a blanket warning nobody reads.
4. Gated by secrets.manage and the same confirmed password the vault entries
use — this is the one place on the page that can reach every credential
the vault otherwise keeps write-only.
5. Says plainly what saving does not do: queue, queue-provisioning, scheduler
and reverb only read .env at their own startup, and names the restart
command plus config:clear.
6. Marks which .env keys SecretVault currently overrides, so editing a line
that a stored vault value already shadows does not look broken.
Two issues surfaced by Codex review and fixed before this commit: the raw
file content stayed in the Livewire component snapshot after the password
confirmation window expired on its own (not only on an explicit re-lock), and
the first save on an installation with no .env yet failed trying to back up a
file that was never there.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Zugangsdaten and Infrastruktur split the same subject by storage mechanism —
SecretVault vs App\Support\Settings — instead of by what each field
configures, which is not a distinction an operator setting up Stripe or DNS
should have to know or care about. One page now, grouped by integration:
Zahlungen (Stripe), DNS (Hetzner), Monitoring, VPN/WireGuard, SSH-Identität. A
secret and a plain setting sit side by side within a section; the difference
stays visible — a vault entry is write-only and shows only an outline, a
setting shows its value in full — as a property of the field, not a reason
for a separate page.
Both storage mechanisms are unchanged underneath: this is a presentation
change, not a data migration. The vault keeps its own gate (secrets.manage +
a recently confirmed password); plain settings keep theirs (hosts.manage
alone). Reachable with either capability, since the two are no longer two
pages a role happens to see one, both, or neither of — every section and
every save action still checks its own capability server-side.
admin.secrets and admin.infrastructure redirect here permanently rather than
404ing a bookmark. The nav entry that replaces both is visible to either
capability — Navigation's capability field now accepts an array meaning "any
of these", not only a single ability.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The footer is four columns of three lines, as designed — but the specimen only
filled the fields an invoice legally needs, so two of the four columns came out
empty and it read as a missing footer rather than as missing data. Reported
that way, which is the correct reading of what was on the page.
A specimen exists to show the layout. Every field now carries an obvious
placeholder, so the shape is visible before any real detail has been entered,
and what is still a placeholder is obvious at a glance.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
TCPDF takes leading whitespace in HTML literally, so every line of the address
and every line description came out indented by however far the Blade template
happened to be nested — and the one line that had no indentation, the VAT
number, sat flush against the margin looking like the mistake. It was the only
correct one.
Also puts the title and the invoice number in one block. As an h1 with a
paragraph beneath it, TCPDF gave the heading a margin of its own and the two
drifted a centimetre apart.
Found by rendering the page and looking at it, which is the only way any of
this is ever found.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
TCPDF 6, deliberately, after installing 7 and finding out what it is. Version 7
is not a newer TCPDF; it is a compatibility shim over tc-lib-pdf whose own
mapping table lists 115 of 293 methods as stubs, and whose font package ships
no font files at all — the first render died on a missing helvetica.json. The
6.x line carries a hundred and sixty-five fonts, a working writeHTML and real
header and footer hooks, and is what everybody means by TCPDF.
The body is a Blade template handed to writeHTML rather than a hundred Cell()
calls with millimetre coordinates, because this table has to be adjusted the
first time somebody sees it on paper, and nobody adjusts the second kind.
InvoiceMath is integer cents end to end, and rounds once. A percentage applied
line by line and rounded each time drifts from the same percentage applied to
the sum — three lines at 3,33 € less 10 % is 99 cents that way and 100 cents
the honest way, and the customer's calculator is what finds it. Gross is always
derived from net and never the reverse: taking VAT back out of a gross figure
returns a different number often enough to matter. A discount and a surcharge
are one operation with opposite signs, so nothing has to remember which of two
flags means which.
Quantities are thousandths, because hours, gigabytes and part-months are all
real, and are printed with the trailing zeroes stripped — "12,000 Std." reads
as a defect.
Every line shows quantity, unit price net, total net AND total gross: this goes
to businesses and to consumers, and each reads a different column first.
Verifying it took two goes and both failures were mine. `strings` over a PDF set
in a Unicode font finds nothing, because the text is stored as subset glyph ids
— the check has to render in a core font to be a check at all. And two of the
strings I then declared missing were simply expectations I had got wrong.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
SITE_HOST takes a comma-separated list now, the first name canonical. It serves
the site; every other name in the list redirects there permanently, path and
query intact. An apex domain and its www are two names for one thing, and
answering on both without picking one splits search rankings and cookies
between them.
The redirect is a host-bound catch-all rather than middleware. Middleware that
only some routes carry is the same half-measure this file already made once,
and a catch-all registered without a host would swallow every path in the
application — which is what the third test is there to stop.
The test harness needed fixing too, and the fix is the finding. Router::dispatch
on a standalone router does not rebind the container's request, so a route
reading one — through the helper OR through an injected parameter, both of which
resolve from the container — gets the test's request rather than the one being
answered. The redirect silently lost its query string in the test while working
in production. dispatchOn() binds it where the framework would.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Its own tab rather than a section of Settings, as asked. What is set here
appears on a legal document, and burying it beside the site-visibility switch
invites somebody to change one in passing.
Everything the printed invoice needs — registered name, address, Firmenbuch
number and court, VAT ID, bank details, payment terms, logo — with the logo
replaceable, because a company changes its mark. None of it reaches an invoice
that already exists: the values are copied into each document when its number
is assigned, so a corrected address is correct from the next one onwards and
cannot rewrite an old one.
The console refuses to consider itself ready while a name, an address or a VAT
number is missing, and says which. An invoice without them is not a valid
invoice in Austria, and issuing one is worse than refusing to.
The series editor carries the same shape as EditDatacenter and for the same
reason. The prefix is free while the series is empty and frozen once a document
carries it: changing RE to AR renames nothing and leaves a series whose past
says RE and whose future says AR, with no record they belong together. The
counter may be raised — an operator migrating from another system needs exactly
that — but never lowered, because a lower number is one already printed on a
document somebody holds. Both rules are recomputed from the database on save
rather than read back from the properties the browser returns.
CompanyProfile drops keys that are not part of the profile. It is fed from a
form, and a forged key must not be able to write an arbitrary setting into the
same table the site-visibility switch lives in.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The previous release bound the landing page and stopped there. The website duly
vanished from the portal — and the portal stayed reachable from the website:
www.clupilot.com/dashboard, /login, /settings all kept working. Half a
separation is no separation, and it was reported back within the hour.
APP_HOST binds every portal route, Fortify's own POST actions included through
fortify.domain — a sign-in form on the website's hostname would otherwise post
to a route that answers there. SITE_HOST now takes the legal pages and
robots.txt with the landing page rather than leaving them everywhere; binding
them is also what makes route('legal.impressum') produce a www URL from inside
a queued mail, where there is no request to take a hostname from.
There is no clever middleware here and there should not be. Route::domain() is
the mechanism: a route registered for one host does not exist on another, and a
request for it gets the 404 it deserves. The only deliberate exception is "/" on
the portal host, which redirects to the dashboard or the sign-in page — that is
what people type from memory, and turning it into an error page to make a point
about hostnames helps nobody. The Stripe webhook and /up stay host-agnostic:
Stripe posts to whichever URL it was given, and a mismatch there loses payments.
Both are opt-in and empty by default, which every development machine reached
by a bare IP depends on.
The tests now check BOTH directions for every path rather than only the one
that was reported. That is the mistake this commit exists to correct.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An invoice is a tax document, so two things drive the shape of this.
It is frozen at issue. Everything the finished document says — issuer address,
VAT number, bank details, customer address, every line, the rate, the totals —
is copied into the invoice row when the number is assigned. The PDF is rendered
from that and never stored, which is what was asked for; rendering it from
today's settings instead would have been simpler and wrong, because an address
changed in 2028 would rewrite an invoice from 2026. The width of this table IS
the feature.
Numbers are gapless and ascending, which is a legal requirement rather than a
preference, and that is why none of it is derived from the invoices table.
"Highest number plus one" hands the same number to two sales that land together
and hands a used number back out after a row is removed — a number already
printed on a document somebody holds. The counter is a column, read and advanced
under a row lock inside the caller's transaction, and taking one outside a
transaction throws rather than quietly working.
Four Rechnungskreise seeded — Rechnung, Gutschrift, Storno, Anzahlung — each
with its own prefix and its own counter, because a credit note is not an
invoice with a minus sign in front of it. Seeded rather than left to the
operator: an installation with no series cannot issue anything, and discovering
that at the first sale is the worst possible moment.
TCPDF added, for the renderer that comes next.
There is deliberately no test for the outside-a-transaction guard, and a note
where it would have been: RefreshDatabase opens a transaction around every
test, so the guard cannot fire and a green test for it would be green for a
reason that has nothing to do with the guard.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The SSH private key CluPilot deploys to every host is now stored through
SecretVault (ssh.private_key), preferred over CLUPILOT_SSH_PRIVATE_KEY(_PATH)
at all three real consumers — SshTraefikWriter and HostStep::keyLogin.
kuma.password/kuma.totp stay in .env: they authenticate a separate Python
container at boot, and nothing in this app reads them, so the vault would
have nothing to wire them to.
A new /admin/infrastructure page, backed by App\Support\ProvisioningSettings,
makes the non-secret deployment settings that used to force a shell —
DNS zone, WireGuard hub endpoint and public key, Traefik's dynamic-config
path, the SSH public key, and the monitoring bridge URL — visible and
editable from the console, each wired to every real consumer. WG subnet/hub
IP and Kuma's own connection details stay in .env: the compose file and a
separate container read those before this application ever does.
Two of the Zugangsdaten page's three entries were decorative: whatever an
operator typed was encrypted and stored, but HttpHetznerDnsClient and
HttpMonitoringClient still read config() directly, so the stored value never
reached an outgoing request. Both now resolve through SecretVault::get() at
the point of use, matching how the Stripe client already worked.
The landing page was registered host-agnostically, so app.clupilot.com served
it: marketing copy, a pricing table and a "sign up" call to action, at the
address where a customer's servers live. Reported exactly that way.
SITE_HOST binds the website to its own hostname. Every other host — the portal,
a bare IP — answers "/" with the product: the dashboard for somebody signed in,
the sign-in page for everybody else. Never a 404 there: "/" is what people type
from memory, and turning that into an error page to make a point about
hostnames helps nobody. Empty keeps today's behaviour, which every development
machine reached by IP depends on.
The console is unaffected — its routes are registered first and win on their
own host, the ordering the status page above already documents.
The legal pages are deliberately not bound. An imprint has to be reachable from
wherever the reader is standing, and a mail footer links to it from whichever
host sent the mail.
Also drops "just reply to this message" from two mails. A reply lands in the
billing or provisioning mailbox rather than in the support queue somebody
actually works through — so it now says to raise it in the portal, where it
gets a place in that queue instead of getting lost.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Four templates, one layout. Two of them — the maintenance announcement and its
cancellation — still wore Laravel's markdown component, which brings its own
logo, its own button and its own footer: the product was sending mail that
looked like two different companies, one of which was the framework.
New: an order confirmation, sent when the payment lands rather than when
provisioning finishes. Those are minutes apart at best and can be much longer,
and somebody who has just been charged and heard nothing assumes the worst
about both the charge and the product. It deliberately promises no time for the
cloud itself — provisioning takes what it takes, CloudReady announces the end,
and a promised minute that slips is worse than no promise. Queued after the
transaction, never inside it, and never allowed to fail the webhook: Stripe
retries anything that is not a 2xx, and a retry would re-enter provisioning
over a mail server having a bad minute.
The finished-cloud mail now names what was actually built — address, plan,
storage, location — because somebody who ordered a fortnight ago is checking it
against what they bought, and that is a comparison rather than a sentence. Still
no credential in it.
Two tests earn their place. One holds every template on the shared layout, so a
new one written in a hurry cannot copy-paste its way back to the framework's.
The other proves the finished-cloud mail carries no password — asserted against
the data the mail is given and the HTML it renders, not against the template's
source, because the first version of that test tripped over the word in a
comment and would have passed a template that leaked the value through a
variable. It tested the prose, not the mail.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Since 1.2.0 the agent has ended with a non-zero status on every tick, before
writing anything. The console showed a check that never finished and a
last-checked time frozen at the moment of the deployment, and the update button
could not be reached at all — the one mechanism that would have delivered the
fix.
Two instances of the same trap, both mine, both under `set -Eeuo pipefail`:
The tag count was `release_version_gt … && echo`. The LAST iteration is almost
always a tag that is not newer, so the loop ended non-zero, pipefail carried it
out of the pipeline, the command substitution inherited it, and set -e ended
the agent. `if` rather than `&&` is the whole fix: an if whose condition is
false still returns 0.
The newest tag came from `git tag … | head -1`. head exits after one line, git
takes SIGPIPE, pipefail does the rest. install-agent.sh has carried a written
warning about exactly this since it was written; I read it and wrote it anyway.
Both now live in deploy/lib/release.sh, because the reason neither was caught
is that no PHP test can reach a bash pipeline.
tests/Feature/ReleaseComparisonTest.php runs the real functions in a real
throwaway repository under the agent's own set -Eeuo pipefail, and asserts the
EXIT CODE as well as the answer — an answer nobody lives to read is not an
answer. The SIGPIPE case needs four hundred tags to reproduce, because a short
list finishes writing before head leaves.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The ownership repair added in 1.1.1 sampled the owner of each top-level
directory and skipped the recursion when it already matched. node_modules was
owned by www-data; node_modules/.vite-temp, left behind by an earlier root
build, was not. So the repair walked past it, `npm run build` failed with
EACCES, and the deployment stopped in maintenance mode — on the release whose
whole point was that this could not happen.
A directory's owner says nothing about its contents. It now walks each tree
once with find and changes only the entries that are wrong, which is also
cheaper than the detect-then-chown-everything it replaces.
Verified against the shape that actually failed: a root-owned file inside a
www-data-owned node_modules, repaired.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Registration opened an account that could sign in immediately on an address
nobody had proved was theirs — and anybody can type a stranger's into a
registration form. Both halves were commented out: the Fortify feature and
MustVerifyEmail on the model.
`verified` sits on the whole portal group rather than on the pages that spend
money. An unconfirmed address is not a billing problem to be caught at
checkout; it is an account that may not belong to the person holding it, and
the servers, the users and the backups behind it are worth as much to whoever
typed the address as to whoever owns it.
The mail is a Mailable in this product's design rather than Laravel's
notification, which would arrive with the framework's logo, button and footer
as the first thing anybody ever receives from CluPilot. It also has to leave
through the SYSTEM mailbox like every other account mail, which the
notification path does not do on its own.
The link is signed and expires, and the address is part of what is signed — so
a link issued to a mistyped address stops working the moment the address is
corrected, rather than confirming an address nobody can read. Tests cover the
tampered link, the expired one, the corrected address, and one account trying
to confirm another.
The waiting page is ours (Fortify has views off) and offers the only two things
that move somebody forward: send it again, or sign out and register with the
address they meant. The resend is throttled, because otherwise it is a button
that makes the server send mail to an arbitrary address as fast as it can be
clicked. Somebody already confirmed is redirected away from it — the `verified`
middleware only guards the other direction.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Completes the device work: the warning mail now has somewhere to send people.
A warning whose only advice is "if this was not you, take action" names a
problem and hands back nothing to do about it.
Both sides get their own component rather than one shared with the guard passed
in. Operators and customers are two guards and two tables (R21) — a component
taking the guard as input is one forged property away from listing and ending
the other side's sessions. Every query in SessionRegistry is scoped by guard as
well as by id for the same reason, and three tests hold that line, because the
unscoped version looks exactly like a working feature while doing it.
TouchLoginSession keeps each row pointing at the session it describes. Both
sign-in paths raise the Login event BEFORE session()->regenerate(), so the row
is written against an id that is dead a moment later — and the once-a-minute
throttle would have held the correction back for the first minute of every
session, hiding the session its reader is sitting in. A changed id is therefore
never throttled.
A session counts as live only if the framework's row exists AND was touched
within the session lifetime. The join alone is not enough: Laravel collects
expired sessions by lottery, so on a quiet installation rows sit there for days
and the list would offer somebody a laptop they shut last month.
Ending the others goes through the product's own modal (R23) and leaves the
asking session alone: signing somebody out of the page they are using to sign
other people out is not what the button says.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Sessions lived in Redis, where they cannot be enumerated — one key per session,
no index by user — so "where am I signed in" and "end that one" were not
answerable at all. The database driver keeps a row per session and makes ending
one a delete. It costs every currently signed-in person one forced sign-in,
once, which is why it is happening now rather than later.
The warning is only worth anything if it is rare, so the two obvious signals
are deliberately not used. Not the IP: it changes on every train, every café,
every mobile handover, and behind a VPN it is not theirs to begin with. Not the
user-agent: Chrome ships every four weeks and the string changes each time,
which would be twelve warnings a year per customer, describing nothing. A
device is a long-lived signed cookie holding a random token, and nothing else
is consulted. The honest cost — cleared cookies, a private window, a second
browser — is written into the mail itself, because a reader who thinks the
warning is wrong stops reading the next one.
Three things the tests found or hold:
The first device on an account is new and must not warn. Replying to somebody
creating an account by telling them they signed in from a new device is noise
on the one message that has to stay worth reading.
token_hash was globally unique, and the shared-browser test failed on it. Two
people on one machine share one cookie and must each own a device row against
it; the obvious repair — issue a fresh token for the second — would orphan the
first person's row and warn them about their own desk. Unique is now per
identity.
Recording a device may never block a sign-in. A safeguard that locks the owner
out when it breaks has stopped being one, so the listener logs and swallows,
and a test drops the tables to prove it.
Sessions are linked by a uuid carried inside the session payload rather than by
the session id, which Laravel rotates on every sign-in and every regenerate().
Laravel's own sessions.user_id cannot carry the link either: it is filled from
the default guard, while operators and customers are two guards and two tables
(R21) — operator 1 and customer 1 would each be offered the other's sessions.
Also lands the shared mail layout the rest of the templates will use: tables
and inline styles for Outlook, no image and no web font because half of all
clients block remote content, and the button in --accent-active rather than the
brand orange, which is 2.9:1 against white.
Not tagged: the session list is not built yet, and without a tag no server can
install this.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An earlier edit removed the ADMIN_HOSTS example line and left its
"Beispiel:" dangling into the VPN_CONFIG_KEY block, so the file
documented neither properly. SECRETS_KEY was never in here at all —
without it the console silently stores no credentials, which is exactly
the kind of thing an example file exists to prevent.
The password no longer travels through third-party mail servers or sits
forever in an inbox: it moves onto the instance (encrypted, same as
nc_admin_ref) and shows on the dashboard until the customer clicks
"Notiert", which deletes it for good.
The 500 on the VPN config download was never in the VPN code. storage/logs/
laravel.log was owned by root, mode 644, since 27.07 04:16 — the moment a
failed `artisan optimize` wrote its error there during a deployment. From then
on the application could not append to its own log: Monolog threw on every
attempt, and a throw while logging is a 500 on any page that logs, with nothing
written down to say why. The error page said "Er wurde protokolliert". It was
not.
It surfaced on the config download because that is one of the few pages writing
a log line on its way through — on success and on a wrong password alike. Pages
that log nothing were unaffected, which is exactly why it looked like a VPN
fault for days.
`docker compose exec` is root unless told otherwise, and every deployment
script relied on that default — including the agent's allowlist sync, which
runs every minute. docker/entrypoint.sh had it right all along and drops to
www-data for precisely these commands. Now so does everything else, help text
included: telling an operator to run artisan as root is how the file ends up
owned by root in the first place.
update.sh also repairs what an earlier run left behind, before its first
unprivileged step rather than after — a root-owned log file is not
self-healing, the page that trips over it is nowhere near the deployment that
caused it, and with in_app unprivileged a root-owned vendor/ would break the
next composer step outright.
tests/Feature/DeploymentRunsAsTheAppUserTest.php holds the line. It was checked
against the previous commit and finds all nine places that were wrong.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Asked for directly: a commit on main must change nothing on a server, and only
a tag whose version is higher than the installed one may be installed.
The agent asked two different questions before this. A pinned server compared
tags; everything else counted commits on its branch — so a console following
main offered an update for every push, verified or not, and "Jetzt
aktualisieren" meant "take whatever is on the branch right now". Landing on main
and being released are different events, and only the second is a decision
somebody made.
It is one question now, regardless of what the checkout is attached to: is there
a tag whose version is higher than the deployed one? Compared with sort -V
against the version in the deployment manifest — not the VERSION file, which an
update moves before it migrates, so a run that failed in between would leave the
checkout claiming a version it never finished installing. A run always targets
that tag; the branch path is gone. A request that arrives with nothing to
install is answered rather than obeyed, before anything announces a run.
The console follows: the button is disabled with nothing released, says so in a
line rather than leaving a grey button to be guessed at, names the version it
would install rather than a count, and refuses the action server-side as well —
a Livewire action is a public endpoint, and one place a rule may not live is
only in the disabled attribute of a button.
VERSION becomes 1.1.0, to be tagged as the first release this mechanism can see.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Clicking "Einrichten" generated a secret and showed the QR with no exit:
leaving meant navigating away, which left an unconfirmed enrolment on the
account that nothing on the console ever displayed. cancelSetup() clears
it — it was never confirmed, so it never protected anything.
The page was also one card with four states stacked into it. Now each
state is its own panel, the enrolment step says which step it is and
carries numbered instructions beside the code, and the recovery codes get
their own card with a copy button instead of being a footnote under
whatever came before them.
Found uncommitted in the working tree at the start of this session and carried
in as its own commit so it can be reverted on its own. Not written here: a
cancel action that clears an unconfirmed secret, the wording for every state of
the page, and a rebuilt setup view. The suite is green with it in place,
including the R18-R23 scan tests.
The code was immutable, which made a typo permanent. It cannot be freely mutable
either, and not only because hosts.datacenter references it: each host's DNS name
was minted from it and registered at the provider, the machine's own hostname was
set from it as it was built, the counter handing out those numbers is keyed by
it, and every past order stores it as plain text with no foreign key to follow.
Renaming a code with hosts in it is not a rename — it is a datacenter called hel
full of machines called fsn-01.
So it is editable exactly while nothing references it, which is the case that
matters: a typo noticed shortly after creating one. Once a host or an order
depends on it the field is disabled and says what is holding it, with the
numbers. The lock is recomputed from the database on every save, never read back
from the property the browser returns.
Alongside it, an optional free-text field for the specific datacenter —
fsn-dc-15. A provider runs several within one location, on separate power and
separate uplinks, and two entries both reading "Falkenstein (fsn)" are not a
choice anybody can make. Nothing keys off it; the code remains the identifier.
Also renames the country loop variables in the edit modal. They were $code and
$name — the component's own properties — and shadowed them for the rest of the
file. Harmless while nothing below the loop read them, which stopped being true
the moment the code became an editable field above it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Checking for updates was a request written into the same mailbox as a real
update, collected by the same agent on the same systemd timer — so asking what
was new was answered on the next tick, and the console, having nothing else to
show, counted down to it. An operator who asked a question was told an update
would start in 3:44.
A systemd path unit now wakes the agent the moment the request file is written,
for a check and for a run alike. PathChanged, not PathExists: PathExists re-arms
as soon as the service goes inactive, so a request the agent could not consume —
it holds a lock for the length of an update — would restart it in a tight loop.
The timer stays as the fallback, and a drop-in disables systemd's start rate
limit, because two triggers on one oneshot service can otherwise wedge the unit
and leave neither of them able to run.
The countdown is gone from both the settings card and the maintenance overlay.
It could not be made honest: its target was recomputed on every poll, and where
the interval the agent reports is shorter than the timer actually installed on
that host it had already gone by, so the fallback moved it forward again each
time. It ran backwards four seconds and snapped back to a full minute, forever —
reported exactly that way. A queued run says it is starting; a queued check says
nothing beyond its badge, because a check starts nothing.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
VpnConfigAccess::reveal() dereferenced Auth::guard('operator')->user()
unguarded, which is null when a modal's session has ended since it was
opened (a Livewire action reaches its component through /livewire/update
on its own, without the page's original route middleware). The same
unguarded pattern was in TwoFactorSetup, InstanceAdminAccess and Settings.
Add App\Livewire\Concerns\ResolvesOperator with currentOperator(), the one
place that resolves the operator and redirects to admin.login when there
isn't one, and use it everywhere the pattern occurred.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Without ADMIN_HOST_EXCLUSIVE the default is false, and https://admin.…/
then serves the PORTAL. That reads as a fault and is not one, so the
example file now says which setting decides it and why the host list must
hold nothing but the console's own name once it is on.
A blocked outbound port (587 filtered at a firewall, as on the live
server) left both MailboxTester and MailboxTransport blocking until
PHP's default_socket_timeout (60s) or the reverse proxy cut the
request — a 504 with no error the operator ever saw. Mail::build()
honours a 'timeout' config key by calling SocketStream::setTimeout()
(confirmed by reading MailManager::configureSmtpTransport() and by an
end-to-end run against a genuinely unroutable host), so MailboxTester
now passes 'timeout' => 10 through it. MailboxTransport builds its
EsmtpTransport directly rather than through Mail::build(), so it sets
the same call on the transport's stream, at 30s — a queue worker can
afford to wait longer than an operator watching a browser, and a
timed-out send is retried rather than lost.
The test button also now shows a visible "sending" state while the
request is in flight, matching the wire:loading span pattern already
used on admin/host-create's save button — previously only
wire:loading.attr="disabled" fired, leaving a greyed-out button with
no other sign anything was happening.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
guest:operator's authenticated-user redirect had no console-aware
override, so it fell to Laravel's own default: the named 'dashboard'
route, the portal. An operator revisiting admin.login while already
signed in bounced to the portal's own login instead — in exclusive
mode, to a 404, since dashboard isn't a console route there.
redirectUsersTo() now mirrors the existing redirectGuestsTo() override
right above it, keyed on the same AdminArea::isConsole($request)
condition, so the two read as a pair.
completeLogin() re-checks isActive()/isOperator() immediately before signing
in, not only at the password step. The two-factor challenge previously only
confirmed the operator row still existed (Operator::find() + a null check),
so disabling an operator or revoking every console role in the window between
the password step and the pending code did not stop the login from
completing — the realistic case is an owner locking someone out mid-login,
not a contrived one.
One check, in the static method both OperatorLogin's direct exit and
OperatorTwoFactorChallenge::verify() already share, rather than a second copy
in the challenge. completeLogin() now returns bool instead of void: false
means refused, and neither the guard nor the session was touched. Each caller
turns that into a ValidationException in its own vocabulary — 'email' /
auth.failed for the direct exit (already unreachable in practice, since
authenticate() just checked the same two conditions synchronously; kept for
defense in depth), 'code' / auth.not_an_operator for the challenge, since the
code entered may be genuinely correct and reusing "wrong code" would mislead.
The three sites that refuse to create or rename an operator onto a
customer's email (Admin\Settings::saveAccount(), ::inviteStaff(), and
clupilot:create-operator) all checked Customer::where('email', ...) as
a proxy for "does this address already have a portal login". A users
row with no matching customers row — an email changed on one side
only, or legacy/orphaned data — passed straight through: this dev
database already had one.
Extracted the three copies into Customer::emailTaken(), which checks
both tables directly, so the three sites cannot drift from each other
again.
The setup-route exemption already went through AdminArea::routeIs(),
which matches both admin.<name> and admin.via*.<name>. The logout
exemption next to it used a bare $request->routeIs('admin.logout'),
which matches only the canonical name — on a recovery hostname the
logout route is admin.via0.logout, so the check failed there and an
unenrolled operator's logout POST bounced back to enrolment instead
of being let through, on exactly the host that exists because the
canonical one is not working.
RequireOperatorTwoFactor exempted the whole of admin.settings while
compulsory two-factor was on, on the theory that it was "the page
where two-factor is set up". That component also carries staff
management, site visibility, network restrictions, account changes,
and the two-factor policy switch itself, so an unenrolled operator got
unrestricted access to all of that, not just enrolment.
Enrolment (secret, QR, confirm, recovery codes, regenerate, disable)
moves to its own route and component, admin.two-factor-setup /
Admin\TwoFactorSetup, reachable by every operator regardless of
capability. That is now the only page the middleware exempts besides
logout, and its redirect points there instead. admin.settings goes
back behind the policy like every other console page; only the policy
switch itself stays there, since only someone who already satisfies
it should be the one changing it.
EnsureCustomerActive used session()->invalidate() to sign a suspended
or closed customer out. In shared-host mode the console and the
portal keep their login key in one session, so invalidate() (flush()
+ migrate(true)) silently signed out an operator elsewhere in that
same browser too. Same fix as the console's own /logout route:
regenerate() gets a fresh session id without flushing attributes
belonging to another guard.
confirmPassword() already checked the right account per guard, but the
session marker it stamped, auth.password_confirmed_at, was one flat
key shared by every guard. In shared-host mode the portal and console
guards keep their login in the same session, so confirming a
customer's portal password left the marker in place for an
operator-only gate too. One private method now computes the key for
all three callers so they cannot drift apart again.
PublicSiteGate let anyone through on a bare Auth::guard('operator')->check(),
which stays true for a disabled operator's live session — disabling
someone does not sign them out, so it never stopped this gate from
showing them the real site indefinitely, even though EnsureAdmin
already treats them as inactive. Now requires the same thing EnsureAdmin
does: an active operator holding a console role.
Chosen to merely ignore an invalid operator session here rather than log
it out. This gate only decides what one request sees; logging out would
ripple into whatever else that session is doing (a concurrent console
tab, mid-task), a bigger side effect than a visibility check exists to
have. EnsureAdmin sets the precedent — it also rejects a disabled
operator per request without touching their session.
Customer::ensureUser() enforced uniqueness only within users, so a
customer provisioned (or registering publicly) with an operator's email
got a second, colliding identity for the same address — the exact thing
R21 exists to prevent. Checks Operator by address now, not by session
(the deleted assertNotAdmin() checked who was signed in, which could
never be the right question).
Public registration gets the same guard via a plain unique() validation
rule, reusing Laravel's stock "already taken" message rather than a
dedicated one — naming the collision specifically would tell a public
visitor an address belongs to staff, a worse leak than the generic
refusal every other collision here already gives them.
Impersonation answers 409 instead of crashing into it. The Stripe
webhook keeps recording the paid order (same principle as
openContract()'s own comment: the order is proof money changed hands)
and withholds only the colliding login, logged for an operator to
resolve by hand.
Verified the reverse direction Codex flagged as already covered: two
Admin\Settings actions and the clupilot:create-operator command all
already refuse an operator email that collides with a customer's, and
that check is sound today because every users row is created in
lockstep with a customers row of the same email (CreateNewUser and
ensureUser are the only two creation sites, both confirmed by grep) and
nothing in this app can change a user's email afterwards (Fortify's
updateProfileInformation feature is disabled, and no other code calls
that action).
console.require_2fa exempted admin.settings from the redirect it forces on
an unconfirmed operator, but that page only ever configured the global
policy — nobody could enrol behind it. A newly invited operator stayed
permanently redirected to a page with no way to satisfy the requirement,
the opposite of what the switch was for.
Adds enable/confirm/regenerate/disable to Admin\Settings, reusing Fortify's
own actions exactly as the portal's Settings already does — they only ever
touch the model they're handed, no guard or auth() call inside them, so
pointing ConfirmsPassword's guard at 'operator' is the only change needed.
The new card is deliberately not gated behind the site.manage capability
that hides the rest of this page's Owner-only sections: the compulsory
switch applies to every operator, so enrolment has to be reachable by every
operator too. Dropped the account card's stale hint pointing at a "separate
security area" that never existed.
operatorUserIds() only discovered console users through model_has_roles. A
pre-existing account granted console.view straight through
model_has_permissions, holding no role at all, was invisible to the
worklist — meanwhile the permission's own guard is switched to `operator`
a few lines above, so that account would silently lose console access
while staying behind as a working portal login. Worklist is now the
deduplicated, sorted union of both tables; orderBy('model_id') kept on
each side since carryAcross() remaps in place and the ordering still
matters regardless of which table an id came from.
Where the console and the portal share a host (shared/fallback mode —
this VM's own mode), both guards keep their login key in the SAME
session. session()->invalidate() is flush() + migrate(true) — it
discards every attribute in the session, not only the operator's, so
signing out of the console silently signed a customer out of the
portal too if the same browser carried both. Replaced with
session()->regenerate(): a new session id, so there is no fixation
risk, while attributes belonging to any other guard survive untouched.
ApplicationBuilder::withMiddleware() defaults redirectGuestsTo() to
fn () => route('login') before bootstrap/app.php's own callback ever
runs — always the portal's Fortify page, regardless of which side of
the site turned the guest away. In non-exclusive (shared, this VM's
own mode) that sends a guest bounced off /admin to a sign-in form whose
table holds no operators: no 404 any more, but a sign-in that can never
succeed. Exclusive mode happened to self-correct only because
RestrictAdminHost 404s the wrong host before this ever ran.
Fixed for both modes at once rather than depending on which one a given
deployment runs: ask AdminArea, the one place routes/web.php's own
registration and RestrictAdminHost already agree is the source of truth
for "is this the console".
POST /broadcasting/auth carries only the 'web' middleware group
(Laravel's own withBroadcasting() registers it that way), so
PusherBroadcaster::auth() resolved retrieveUser() on the DEFAULT guard
before the admin.runs channel's own Auth::guard('operator') check ever
ran — found nobody, since an operator is never signed in on 'web', and
threw straight from there. The guard was correct but unreachable.
Fixed by naming both guards on the channel registration itself.
Also adds broadcasting/auth to RestrictAdminHost::SHARED: in exclusive
mode it was neither admin.* by name nor on the shared list, so it 404'd
on the console host too — degrading silently to wire:poll.4s rather
than breaking outright, which is why nothing screamed.
Three faults in the same migration:
- up()'s removal loop was driven by operatorUserIds() (model_has_roles
WHERE model_type=User) via the $carried array — but carryAcross()
repoints model_has_roles to Operator for every operator before a
single users row is deleted. A run that stops partway (the
customer-conflict abort, or a dropped connection on real MariaDB,
which this file deliberately runs without a transaction) leaves that
worklist empty on the next attempt, so `migrate` records the
migration as applied while every leftover users row still grants a
live portal login on the operator's own password. Now driven by
`operators` joined to `users` on email: that finds every
carried-but-not-yet-deleted row regardless of which run carried it.
- operatorUserIds() had no ORDER BY. carryAcross() remaps four owned
columns in place, keyed on the old users.id, while operators.id hands
out new values in the same order the list is walked — unordered, a
later operator's freshly assigned id can equal an earlier operator's
still-unprocessed users.id, and the second remap catches a row the
first one already rewrote. One operator ends up silently owning
another operator's VPN peer. Added ->orderBy('model_id').
- down() restored model_has_roles but not model_has_permissions, so an
operator holding a direct (not role-granted) permission lost it on
rollback. Mirrored the same move carryAcross() does forward.
Also removes seed_roles_and_permissions' now-stale
User::OPERATOR_ROLES/hasAnyRole()/assignRole() bootstrap loop — all
three gone from User per this branch's own work — which only a deep
rollback (down() of the move migration recreates is_admin users) would
ever have reached, but would fatal when it did.
It checked Auth::guard('operator')->check() instead of the users row it
was handed, so with an operator's own session still attached (shared
mode carries the same cookie through both legs of impersonation) it
threw the moment a customer's email already had a users row — a 500 on
the first impersonation of anyone who had signed into the portal
themselves. Deleting it rather than fixing the check: operators live in
`operators` now, never in `users` (R21), so a users row can no longer
BE an operator account for this to guard against. Also drops the dead
`'is_admin' => false` write — the column reads from nowhere any more.
redirect()->to(AdminArea::home()) resolved against whatever host the
leave() POST itself arrived on — the portal's, once the console has a
hostname of its own — landing the operator on the portal's dashboard
instead of back at the console. route('admin.overview') is domain-bound
to the console and generates the correct cross-host URL, matching what
this line did before this branch. The test named after this behaviour
now actually asserts it.
actingAs()/Livewire::actingAs() call Auth::shouldUse(), which made every
existing test for this trait pass identically whether confirmPassword() asked
for the right guard explicitly or just read whichever guard happened to be
default — reverting the explicit guard() call to a bare auth()->user() passed
the full suite. This test signs the operator in without actingAs and
deliberately decouples the ambient default guard from their session before
calling confirmPassword(), so only the explicit resolution can succeed.
Deleted tests/Feature/Auth/ConsoleLoginLandsInTheConsoleTest.php — it tested
the three deleted response classes. Its intent (an operator's sign-in landing
in the console, not the portal) is covered by OperatorLoginTest's "signs an
operator in on the operator guard" and OperatorTwoFactorChallengeTest's "signs
the operator in once the code actually checks out", both confirmed present
before deletion; the route-separation half is covered by the new
ConsoleHostSeparationTest cases added in this commit.
Re-measuring before writing found the spec's numbers had moved: seventeen
permissions now, not sixteen, because the mailbox work added mail.manage.
It also turned up something the spec did not anticipate — ConfirmsPassword
resolves the password through auth()->user(), the default guard, so all
five components using it break the moment a second guard exists. That is
now its own task.
Self-review caught two references to things that do not exist: users has
no uuid column, so the impersonation link addresses the customer instead,
and there is no layouts.guest — the auth pages use layouts.portal.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
env('MAIL_HOST')/env('MAIL_PORT') returning anything, or MAIL_URL supplying
either, now counts as "supplied" and wins over the sentinel comparison — a
relay genuinely on 127.0.0.1:2525 no longer reads as unconfigured. The
sentinel stays as a fallback for when neither signal says anything (including
under config:cache, where env() goes null and this collapses to today's
behaviour).
MAIL_SCHEME=smtp is Symfony's opportunistic scheme (upgrade to STARTTLS
if offered, don't fail if not) — not a "no encryption" statement.
Mapping it to 'none' silently turned every existing MAIL_SCHEME=smtp
installation's encrypted-when-possible connection into an always-
plaintext one. Maps to 'tls' (STARTTLS required) instead: stricter than
smtp's own default, so a relay lacking STARTTLS now fails loudly rather
than leaking credentials.
saveServer() wrote host/port/encryption without touching any mailbox, so
the console kept showing every mailbox as verified against a server
nothing had tested since. Mirrors EditMailbox::save()'s existing guard on
a single mailbox's own identity, just at server scope: only clears when a
field actually changed, so re-saving unedited values leaves a real
verification alone.
Both places now delegate the actual clear to new Mailbox::
invalidateVerification()/invalidateAllVerifications() methods rather than
touching last_verified_at directly, sharing the mutation. The "did this
change" comparison stays separate in each caller - one diffs a loaded
model's attributes, the other diffs persisted settings against incoming
scalars, and forcing them through one function would add machinery no
actual duplication justifies.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
MailboxTester required a usable SECRETS_KEY unconditionally, refusing an
unauthenticated relay's test-send on a fresh install with no key yet, even
though real sending never touches the cipher for that mailbox. Gated the
check on authenticates, same as the password-presence check beside it.
Comparison pass across MailboxTester and MailboxTransport turned up two more
of the same shape. MailboxTransport's delegate-cache fingerprint decrypted
$box->password unconditionally, even when unauthenticated and never going to
use it — a mailbox that once authenticated, stored a password, and later had
authenticates unchecked would crash real sending the moment SECRETS_KEY
became unusable. And MailboxTester had no guard against a stored port <1;
Symfony silently reinterprets that as port 25 rather than refusing it, so the
test button could reach whatever happens to listen there and report success
for a configuration MailboxTransport refuses outright.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An SMTP relay with a host and a from address but no username or password
- a trusted local or private-network relay - always used to be seeded as
a placeholder, because the takeover required a username to treat an
account as real, and Mailbox::isConfigured() always required a stored
password. Laravel's own SMTP mailer has supported unauthenticated relays
all along.
Add mailboxes.authenticates (default true, so every existing row keeps
its current behaviour) to tell "does not authenticate" apart from
"authenticates, but nobody has typed the password yet" - the same empty
password column used to mean both. The takeover migration now seeds the
real account off the host/address alone and marks it authenticates=false
only when neither a username nor a password resolved; isConfigured(),
MailboxTransport and MailboxTester all read it before requiring or
sending a password; the edit modal gets a checkbox for it with the
password field's hint updated to match, in both languages.
MAIL_SCHEME=smtps or an smtps:// MAIL_URL on a non-465 port used to be
downgraded to STARTTLS because mail.encryption was derived from the port
alone. Resolve the scheme first (from MAIL_SCHEME directly, or from the
URL's own scheme via the same ConfigurationUrlParser Laravel uses) and
only fall back to the port heuristic when nothing was actually stated -
which is also what keeps this machine's invalid MAIL_SCHEME=tls from
silently steering the result.
isUsable() checked only "is SECRETS_KEY nonempty", so a set-but-malformed
key (wrong length, garbage base64) read back as usable even though
encrypter() rejects it two lines below. EditMailbox::save() and
MailboxTester::run() both gate on isUsable() specifically to avoid an
uncaught RuntimeException reaching the operator; a lying isUsable() meant
that guard did not fire in exactly the configuration it exists for.
Both methods now read resolveKey() — the base64: prefix, the raw-base64
path, the 32-byte check — so they cannot disagree about a value either
one is given. SecretVault::isUsable() and the secrets console page's
"no key" banner both delegate down to this and are covered here too, not
assumed to inherit the fix correctly.
The seed migration read config('mail.mailers.smtp.host') and its three
siblings directly. An install configuring SMTP through MAIL_URL (the
other form config/mail.php supports) never sets those individual keys —
MailManager only substitutes the URL's components in at transport-build
time, inside its own protected getConfig(). Read raw, that left the
migration seeding config/mail.php's own placeholder defaults, which the
UNCONFIGURED_HOST/UNCONFIGURED_PORT guards then read as genuinely unset:
blank host, port 0, an unconfigured mailbox, for an install that was
sending mail successfully.
resolveSmtpConfig() calls the same Illuminate\Support\ConfigurationUrlParser
MailManager::getConfig() itself delegates to, so this is the same
resolution rather than a second copy of its merge order. Verified against
the real (protected) getConfig() via reflection: the URL wins for
host/port/username/password wherever it actually supplies one, and an
unset MAIL_URL leaves this a no-op.
The takeover migration seeded `address` from MAIL_USERNAME and left
`username` null unconditionally, conflating the SMTP login with the
sender address. Whenever the two differ — an API-key username, a
shared relay login — mail would go out From the login instead of the
address the system was actually configured to send from, exactly like
this installation: MAIL_USERNAME is no-reply@clupilot.com but
MAIL_FROM_ADDRESS is hello@clupilot.local.
`address` now reads config('mail.from.address'), falling back to the
SMTP login only when that reads back config/mail.php's own unset
placeholder (env('MAIL_FROM_ADDRESS', 'hello@example.com') — the same
masking problem UNCONFIGURED_HOST already guards against for
MAIL_HOST). `username` is set to the SMTP login only when it actually
differs from the resolved address, since Mailbox::smtpUsername()
already falls back to address when username is null. display_name
now reads config('mail.from.name') instead of a hardcoded literal.
The placeholder domain for the four non-configured mailboxes still
comes from the SMTP login, not from mail.from.address — the two can
name different domains, and only the login's is proven to accept mail
for a given install.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
savePurposes() only checked that each key was a nonempty string, so a
stale or tampered mailbox key (reachable by posting straight to
/livewire/update) saved successfully while MailboxResolver silently
returned null for it. Every purpose's key must now name a mailbox that
exists; system's must additionally be active, since every unmapped or
inactive OTHER purpose falls through to it.
EditMailbox::save() also cleared last_verified_at only when the
password changed, but smtpUsername() depends on address and username
too (falling back to address when username is blank) — changing
either while leaving the password untouched kept showing a successful
verification for an identity nothing had actually tested.
EsmtpTransport's autoTls (default true) and requireTls (default false)
are independent of the implicit-TLS constructor argument: 'tls' left
these at their defaults, so a server that omitted STARTTLS sent
mailbox credentials in the clear while reporting success, and 'none'
would silently upgrade the moment a server offered STARTTLS. Both
MailboxTransport and MailboxTester already duplicated the "ssl, or
port 465 ⇒ implicit" half of this decision independently; MailTlsPolicy
is now the one place both read, for both dimensions.
MailboxTester still builds through Mail::build() rather than a hand-built
transport: MailManager::createSmtpTransport() forwards the whole config
array to EsmtpTransportFactory as DSN options, which already reads
auto_tls/require_tls itself, so the same policy reaches this path
through keys the config array already supports.
Symfony's mailer only knows the schemes smtp and smtps; the example's
MAIL_SCHEME=tls (and the "tls | smtps (465)" comment naming it as an
option) made the default mailer unconstructible. .env itself is left
alone — that is the operator's live file.
I3: nothing stopped an operator unchecking Aktiv on the mailbox that
mail.purpose.system points at. MailboxResolver::active() filters an
inactive mailbox at BOTH the direct lookup and the system fallback, so
that one checkbox could take mail.purpose.system to null and every
purpose without its own mapping down with it — the existing
system_required guard on savePurposes() reads as if this were covered,
but it only blocks the empty-mapping path, not this one.
EditMailbox::save() now refuses active=false against the mailbox 'system'
currently points at, the same way savePurposes() already refuses to leave
'system' empty.
I4: Admin\Mail::saveServer() writes mail.host — the platform's outbound
relay for every purpose mailbox at once — and CloudReady::toMail() puts a
customer's Nextcloud admin password in cleartext in the message body. So a
signed-in mail.manage session was already a credential-interception
primitive, the same threat Admin\Secrets' second gate exists for. Both
saveServer() and EditMailbox::save() (only when a new password is actually
being typed) now also require passwordRecentlyConfirmed(), following the
ConfirmsPassword pattern Secrets.php and Settings.php's two-factor actions
already use — including their per-action UI shape (an inline confirm form
scoped to the gated action), not a whole-page lock, so address, display
name, username, no-reply, active and the purpose mapping stay reachable
without confirming, per the brief's capability split.
Both gated and ungated paths are covered by tests, and both guards were
mutated away and confirmed to fail before being restored.
Mail::to($x)->queue($mail) resolves the DEFAULT mailer, and
Illuminate\Mail\Mailer::queue() (vendor Mailer.php:482) does
`$view->mailer($this->name)->queue($this->queue)` — overwriting
MaintenanceAnnouncementMail/MaintenanceCancelledMail's own 'cp_maintenance'
with the default mailer's name ('array' in tests, 'log'/whatever
MAIL_MAILER is in prod) before the job is even built. Both mails kept
sending through the old .env account instead of MailboxTransport. CloudReady
was never affected — MailChannel.php:66 preserves a notification's own
mailer.
Fix: name the mailer before queueing — Mail::mailer($mail->mailer)->to(...).
$this->name on the resolved Mailer is then already $mail->mailer, so the
vendor overwrite becomes a no-op instead of a silent downgrade. Confirmed by
reading the vendor source, not assumed.
SenderAddressTest's "names the purpose mailer..." test asserted
$mail->mailer on a bare, never-queued mailable, which proves nothing about
what survives queueing — the constructor sets it right regardless of what
MaintenanceNotifier does with it. Replaced it with one that drives
MaintenanceNotifier::deliver() under Queue::fake() and inspects the pushed
SendQueuedMailable's mailable. Verified it fails against the pre-fix code
first (the pushed job carried mailer = 'array'), then verified the fix
makes it pass, then mutated the fix away and watched it fail again.
MailboxSeedMigrationTest.php had the actual .env MAIL_PASSWORD for
no-reply@clupilot.com hard-coded into a test fixture — replaced with an
obvious dummy. Grepped the whole branch (576cfca..HEAD) and the working
tree for that string and for every other real secret value in .env;
nothing else leaked.
Separately, the seed migration's SECRETS_KEY-missing warning claimed a
password "was NOT copied into the mailbox table" even when a vault row
already existed and its ciphertext WAS carried across a few lines below,
unconditionally on $canEncrypt. An operator debugging a live mail outage
would have been sent to re-enter a password that was already sitting in
the column. The warning now distinguishes the two cases and says which
one actually happened.
It only ever loaded the page and asserted the banner, never a password
save — but its name claimed the crash-on-save case, which is exactly the
promise that let that bug ship unnoticed once. The test that earns the
crash claim is its new neighbour, added for the same finding.
EditMailbox::save() now checks SecretCipher::isUsable() before touching a
typed password and reports it as a form error, instead of letting
SecretCipher::encrypt() throw all the way to Laravel's debug page. Also
switches the mail.manage migration to Role::findOrCreate, matching every
sibling capability migration, so a squashed replay can't hit
RoleDoesNotExist.
The vault's mail.password row is no longer deleted by this migration at
all, in either direction: deleting it unconditionally destroyed a real
password whenever MAIL_USERNAME was empty (nowhere to carry it to), and
even on a successful carry-over a later rollback had nothing left to fall
back to. Reproduced both against real MariaDB, along with a migrations-
table drift that crashed a retry on the mailboxes.key unique constraint —
fixed with Mailbox::firstOrNew() and a transaction around each direction.
down() now goes through the new Settings::forget() instead of a raw
delete, so it stops leaving the settings cache holding what it just
removed. A skipped .env password (SECRETS_KEY still unset) now prints an
operator-visible line instead of migrating clean and failing silently
later. Host/port that resolve to config/mail.php's own placeholder
defaults are treated as unset rather than as a real relay.
The seed migration also guards against SECRETS_KEY being unset at migrate
time (encrypting the .env password would otherwise throw and take the
whole migration down, on a fresh install as much as in the test suite),
and the four tests/Feature/Mail files written before this migration reset
the mailbox table in their beforeEach so they keep testing what they did
before mailboxes.key collided with the seeded rows.
A mutation the reviewer ran (if ($box !== null) -> if (true)) left every
test green: CloudReady hand-rolled the same null-mailbox guard as
SendsFromMailbox, but nothing exercised its null branch. Added the
missing test, then extracted the decision itself (null mailbox -> no
sender fields, no_reply -> no Reply-To) into one shared method so an
Envelope-shaped and a MailMessage-shaped consumer can no longer disagree.
Re-review of the previous fix round found the "cannot disagree" part of
finding 4 was still open. resolution() had unified the log/array/null/
mailbox decision, but inside the mailbox branch describe() returned
$box?->address unconditionally while delegate() additionally required
isConfigured() before using it. A mailbox with active=true, a real
address, and no password produced
'mailbox://support/support@clupilot.com' — reading as entirely healthy
— while send() threw. That is exactly the harm the original finding
named: the log says fine, the mail fails.
resolution() now decides "unconfigured" too, not just "which
non-delivering mode": it calls isConfigured() itself, once, and returns
that verdict alongside the box. describe() and delegate() both branch
on the SAME result again, the same way they already did for log/array/
null — a mailbox with no password now reads as
'support@clupilot.com [unconfigured]' rather than a plain address, and
the address stays visible so an operator can tell WHICH mailbox needs
fixing.
Also renamed a test the re-review flagged as promising more than it
checked: "registers a mailer per purpose without touching the database
at boot" only ever verified the config array's shape — the DB-touching
claim is a separate, already-passing test just below it
(defines every purpose mailer as a plain literal...). Renamed to
"registers a mailer for every purpose". No behaviour change.
Added a test creating a mailbox with no password and asserting the DSN
both names the address AND carries the marker, plus that send() still
throws — proving agreement, not just a matching label painted on
separately. Mutated describe()'s unconfigured branch to drop the
marker: the test failed exactly on the missing 'unconfigured' string
(DSN read as a plain, healthy-looking address again). Reverted, reran,
passes.
Full suite: 667 passed. vendor/bin/pint --test clean on both files.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The reviewer continued the mutation sweep from Task 4's own commit and
found three more unpinned lines in delegate(), plus two real behaviour
gaps, all inside the same 40-line method:
- The fingerprint refresh (the headline feature: a worker's mailer
must pick up a corrected password without a restart) had no test —
mutating its check to "delegate === null" left the suite green.
- The implicit-TLS third argument to EsmtpTransport had no test either
— mutating it to a hardcoded true left the suite green, because the
only assertion touching it was instanceof EsmtpTransport, which the
hanging variant also satisfies.
- isLogging() only ever checked for 'log', but phpunit.xml sets
MAIL_MAILER=array for the whole suite. Task 5 wires real mailables
to these mailers next; the first feature test that sends one without
Mail::fake() would have opened a real SMTP connection.
- describe() and delegate() each ran their own copy of that guard —
which is exactly how deleting it from ONLY delegate() passed the
whole suite in the first place: __toString() kept reporting "log"
from its own untouched copy.
- An unconfigured host/port (Settings::get('mail.host', '') and a
stored null port casting to 0) built a transport pointed at
smtp://:587 or silently downgraded to plaintext port 25, instead of
refusing the way a missing mailbox already does.
Fixes: replaced isLogging() with resolution(), the one place that now
decides "log, array, null-default, or a real mailbox" — describe() and
delegate() both branch on ITS result, so a guard broken in one cannot
look fine in the other. Added an explicit RuntimeException for a blank
host or non-positive port, guarded the same way as the missing-mailbox
case just above it.
Tests: added coverage for the fingerprint rebuild (reuses the same
delegate until the password actually changes, proven by object
identity), the exact DSN string for both the STARTTLS (587) and
implicit-TLS (465) cases, 'array' and unset-default both landing on a
non-delivering transport, and the blank host/bad port throwing.
Mutated each of these four in turn on the final code and confirmed:
fingerprint check removed -> the reuse test fails (same object handed
back after the password changed); TLS argument hardcoded true -> the
587 DSN test fails ('smtps://...' where 'smtp://...:587' was
expected); NON_DELIVERING narrowed back to ['log'] -> both the array
and unset-default tests fail (a real EsmtpTransport where a safe
transport was expected); host/port guards removed -> both throw
expectations fail. Reverted each, reran, all twelve tests pass again.
Replaced the two tests that reached into delegate() via Closure::bind
to check "log or SMTP" with one behavioural test: point Settings at a
closed loopback port (127.0.0.1:1, so refusal is instant and entirely
local — no DNS, no dependency on this environment's network egress
policy) and assert Log::shouldReceive('debug')->once() while sending
for real through Mail::mailer('cp_support')->raw(...). Mutated
NON_DELIVERING to drop 'log' specifically and confirmed this test
alone catches it: a real connection attempt to the closed port throws
TransportException (Connection refused) in under 300ms. Reverted,
reran, passes again.
Also: the two tests that only checked the config array's shape and a
snapshot of the resolved address promised more than they verified —
CLAUDE.md R19 names a test that recomputes the implementation as
checking nothing. Added a source-level test that the five cp_* config
entries are parenthesis-free literals (same technique
DisplayTimezoneTest/IconLayoutTest use: a property of the file, not of
one run) as the actual "no query at boot" proof, and renamed the
send-time test to what it verifies now that the fingerprint test above
covers the live-refresh claim properly.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Review of Task 4: MailboxResolver::for() only fell back on a missing
mapping or a missing row. Deactivating a mailbox — the operator's
explicit "do not use this" — left it resolvable anyway, so
MailboxTransport reached it, found isConfigured() false, and threw
instead of quietly using the next candidate the way every other
"this mailbox is unusable" case does. Worse, __toString() still
reported the deactivated address as though it were healthy.
named() now runs through a new active() filter at BOTH lookup sites —
the purpose's own mapping and the system fallback — so an inactive
system mailbox is refused exactly like a missing one, not handed out
as the last resort. A missing password stays deliberately unfiltered
here: that is a MailboxTransport concern (loud failure naming the
mailbox), not a resolver fallback trigger — silently rerouting mail
because a password hasn't been typed yet would hide the gap instead
of surfacing it.
Added two tests and mutated active() to a no-op filter to confirm they
catch it: both failed (one expected the system mailbox, got null; the
other expected null, got the inactive mailbox's full attribute dump).
Reverted, reran, both pass again.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Five purpose-named mailers (cp_maintenance, cp_provisioning, cp_support,
cp_billing, cp_system) land in config/mail.php as plain static entries —
no query runs to build them. Mail::extend('mailbox', ...) in
AppServiceProvider registers a transport that looks up its mailbox
through MailboxResolver only once a mailer is actually resolved, which
for queued mail is inside the worker at send time, never at boot.
Mutation-tested the brief's own three tests by deleting the MAIL_MAILER
guard from MailboxTransport::delegate(): all three stayed green. They
only exercise __toString()/describe(), a code path separate from the one
that actually sends. Added two tests that reach into delegate() itself
(a bound closure, since it's private) and assert the transport it
actually builds: LogTransport while MAIL_MAILER=log, EsmtpTransport once
it isn't. Re-ran the same mutation against the strengthened suite: it
now fails (EsmtpTransport where LogTransport was expected), then passes
again once reverted.
Verified two things against the installed versions before writing this:
LogTransport takes a Psr\Log\LoggerInterface and Log::channel(null)
resolves to the default channel rather than throwing, and
Mail::extend('mailbox', ...) is read by
MailManager::createSymfonyTransport() via $config['transport'] before it
would fall back to createSmtpTransport() — both matched the brief
exactly, no changes needed there.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The old test rotated app.key and expected the password to stay
readable, but Laravel's encrypter is a container singleton resolved
once — config()->set('app.key', ...) never rebuilds it, so the
rotation the test performed was invisible to any code path going
through it. Confirmed by mutation: rewiring Mailbox to Crypt::
encryptString/decryptString (genuinely APP_KEY-keyed, the exact
regression this constraint exists to forbid) left the old test green.
Replace it with two tests: a positive proof that rotating SECRETS_KEY
makes a stored password unreadable (the one that discriminates), and
a separate check that rotating APP_KEY does not, with
forgetInstance('encrypter') so that rotation is actually visible to
whatever the password accessor resolves.
Re-ran the same mutation against the new test: it fails (exit 1, the
SECRETS_KEY test reports the expected DecryptException was not
thrown), then passes again once the mutation is reverted.
The Task 2 reviewer rewired the model to Laravel's APP_KEY-based Crypt
facade and every test stayed green. Laravel's encrypter is a container
singleton resolved once from app.key, so config()->set('app.key') never
rebuilds it and the rotation the test performed was invisible.
Replaced with a positive proof — rotating SECRETS_KEY must break
decryption — plus the APP_KEY case with forgetInstance(), which is what
makes that direction mean anything.
Mailbox hand-rolled the same creating-time UUID assignment that
App\Models\Concerns\HasUuid already provides to 17 other models under
R11 (URLs address records by UUID, not integer PK), and skipped the
route-key binding that comes with it. Swap onto the trait, and cover
both the assignment and the route key with a test matching the
convention already used for Host/Order.
Also match MailboxFactory's @extends annotation to how the other
factories in the repo write it (Pint's fully_qualified_strict_types
rule turns a fully-qualified docblock reference into an import plus a
short name anyway, so this is what it would end up as either way).
Seventeen models use App\Models\Concerns\HasUuid, and R11 is the reason:
URLs address records by UUID, not by integer primary key. The plan told
the implementer to hand-roll booted() instead, losing getRouteKeyName()
with it. Authoring error, corrected before the remaining tasks copy it.
The Task 1 implementer copied '// path/to/file.php' into the files
verbatim, which breaks Pint's blank_line_after_opening_tag and matches
no file in the repo. The annotation was mine; the constraint now says so
before the next seven tasks repeat it.
Self-review against the spec turned up four gaps and one latent bug in
what already ships.
The bug: Laravel 13's MailManager reads only 'scheme' when building an
SMTP transport (MailManager.php:196) — the old 'encryption' fallback is
gone — and .env carries MAIL_SCHEME=tls, which Symfony does not accept;
it knows smtp and smtps. Nothing has failed because MAIL_MAILER=log
means no connection has ever been opened. The plan stores a human-facing
tls/ssl choice and translates it where it is used, and never copies
MAIL_SCHEME through.
The gaps: the cancellation mail and the provisioning notification were
edited but not tested, secrets.manage was never proven insufficient for
the new page, and a missing SECRETS_KEY had no task making the page say
so rather than throw.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The console offers a single mail.password pointing at one SMTP mailbox,
which is nowhere near enough for five sending addresses. A mailbox is
address, display name, username and password; five of them as registry
entries would be twenty secrets named mail.support.username, and the
question of which mail sends from which address would still have no home.
Send-only stays usable because every message carries Reply-To on its own
mailbox, so a customer's reply lands in a mailbox someone reads. That is
what makes IMAP unnecessary rather than merely deferred.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Decided: whoever is in operators has no business in users. A row left
behind is the same mixing the separation exists to end, only smaller.
The one case that deletes nothing is a row with a customer, a seat or an
order on it. That would mean the same person is operator and paying
customer, and a silent delete would take billing data with it — so the
migration stops and names the address instead. Neither existing account
is in that state.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The operator console and the customer portal share one users table, one
login page and one guard. Three reported faults follow from that single
fact: the console serves the portal's sign-in page, that page offers
"Registrieren", and the link 404s because RestrictAdminHost::SHARED does
not list register.
Measured rather than assumed: driving the host guard directly gives
/login through and /register 404 on the console host, and all sixteen
Spatie permissions turn out to be console permissions — so RBAC moves to
the new guard rather than being duplicated across two.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The three templates the design was signed off against lived in a
session-scoped scratchpad and would have disappeared with the session — the one
artefact the whole conversion is measured against. They are in docs/design/ now,
with the measurements that were got wrong at least once written down beside
them, and a note that the way to check is to render and measure rather than to
read the source. That distinction already settled one disagreement: the source
said the metric grid used a 20px gap, rendered it is 14px.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three things reported together.
── Editing belongs in a modal (R20)
The seats table grew its input fields into the row. It worked and it looked
broken: the row grew, the columns beside it jumped, and a table half in edit
mode reads as a rendering fault rather than as a form. The project already had
the answer — EditDatacenter, whose own header comment says it avoids exactly
that row-height jump — and the seats table simply did not use it.
EditSeat is now a ModalComponent. A modal is reachable WITHOUT the page's route
middleware, so it resolves the customer itself and re-reads the record rather
than trusting a hydrated property: a forged addressEditable would otherwise
open the address of an accepted seat, and the address is the person — editing
it hands one employee's access to another with nobody told. Only an invitation
still in flight can have its address corrected, which is the case that actually
comes up.
The actions column is now always drawn. It used to disappear when the only seat
was the owner, on the reasoning that there was nothing to act on. But every
seat can be renamed, and a column that vanishes does not read as "not
applicable here" — it reads as "this product cannot do that", which is how it
was reported, three times. The owner's row says "Geschützt" rather than leaving
an empty cell.
Also caught here: the edit fields carried class-wide #[Validate] attributes, so
an empty edit form made the INVITE button fail on a field the invite form does
not have. Rules for an action belong to the action.
── The update button
"I cannot run an update, it says everything is current." `behind` is a READING
taken by the agent every five minutes, not the state of the world — push a
commit and the console insists it is up to date and refuses to act. The agent
does its own fetch before deciding, so asking against a stale reading costs one
fetch and finds nothing; being locked out costs the deployment. The button is
now offered whenever an agent is alive and no run is in flight, labelled for
what it does rather than for what the last reading said.
── The update never announced that it had finished
Because the thing being watched restarts the thing doing the watching. Mid-run
every wire:poll request fails, and what answers afterwards is a new build being
questioned by the old page's JavaScript — so the card sat on "läuft" until
somebody reloaded by hand. A small Alpine watcher now asks a plain JSON
endpoint (no Livewire, no component state, no assets), treats a failed request
as the restart rather than as a fault worth giving up over, and reloads once
the build it is looking at is no longer the build it started with.
── Support
The page was a decorated placeholder: a button that raised a toast saying the
form was "only hinted at in the prototype", three invented ticket titles living
in the translation file, and no way to see what became of anything. It looked
thin because nothing on it was real.
It now leads with the customer's own requests — what somebody arriving here
wants to know is what they asked and whether anyone answered — with contact
details moved to the side where they belong. The form attaches the plan, the
instance and who is asking automatically: making a customer describe their own
server back to the people who built it is the part of support people hate. FAQ
answers end where the thing can actually be done, and "is it me or is it you"
is answered by a link to the status page.
637 tests. R20 recorded in CLAUDE.md and enforced by EditInModalTest: no page
view may grow an input field inside a <td>.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The console announced an update for "spätestens um 15:21" while the clock on
the wall said 17:21. Not a formatting slip in one string: fourteen views and
four components printed database values straight out, so every absolute time in
the product was two hours out all summer and one hour out all winter.
Two of those views looked as though they had handled it. They called
->timezone(config('app.timezone'))
which reads like "convert to local time" and, app.timezone being the STORAGE
zone that must stay UTC, converts to UTC — a no-op wearing the costume of a
fix, which is worse than no call at all because it stops the next person
looking. That exact string is now banned by test.
Worse than the labels were two FORMS. Maintenance windows and plan versions
filled their datetime-local fields from UTC and parsed what came back as UTC. A
datetime-local field carries no offset — it is the digits a person reads off
their own clock — so an operator typing 21:00 scheduled a window for 23:00
their time, and nothing anywhere said so. App\Support\LocalTime now holds
toField() and fromField() side by side, because getting one end right is not
half a fix, it is a fresh bug.
The mechanism is one Carbon macro, ->local(). It copies before converting:
Illuminate\Support\Carbon is mutable, so without that, rendering a timestamp
would rewrite the model attribute as a side effect and anything comparing or
saving it afterwards would be an hour or two out. Both Carbon classes get the
same body — Carbon keeps macros in one global table, so the second registration
replaces the first for every Carbon class, and two different bodies meant the
immutable version, safe for itself, silently became the mutable one's
implementation too. My own test caught that.
The existing tests had not caught any of this because they built their expected
values with the same wrong call the views used — a test that recomputes the
implementation asserts nothing. They now assert the wall clock, and the queued
update additionally asserts that the UTC time is NOT shown.
Recorded as R19 in CLAUDE.md and enforced by tests/Feature/DisplayTimezoneTest:
no Blade or Livewire component may format an absolute time without ->local(),
the UTC no-op is banned, storage stays UTC, both sides of the DST boundary are
checked, ->local() must not mutate, and a form field must round-trip to the
same instant.
APP_DISPLAY_TIMEZONE, default Europe/Vienna. 615 tests.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The demo customer is a genuine login on a panel that answers from the public
internet. A default password in a seeder would sit on production for as long as
the demo does, and "it is only the demo account" is how the first one gets
taken. It now takes DEMO_PASSWORD if the operator sets one and otherwise mints
a 24-character random password, printed once at seed time.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The panel had been built by reading the template and believing the result.
Every round of review found the same class of defect, so this round the
template was rendered in a browser and measured with getComputedStyle, and the
implementation measured the same way — two number columns instead of an
opinion.
That immediately settled a disagreement: a review of the template's SOURCE said
the metric grid used a 20px gap. Rendered, it is 14px. The measurement wins.
Brought to the template's figures: label 11.5px (it was 11px in three separate
places, which is how it drifted — it is now one .lbl rule), value tracking
-0.02em, unit weight 450, metric row 6px above and 14px between, page head
centred with a 14px gap, grid gap 14px, columns switching at 1101/561px and the
h1 at 901px to match the template's own breakpoints, ring 62px, bar 5px.
The shared button now takes its height from min-height (40px) rather than
vertical padding, at 14px/600 with 0 18px padding and a 10px radius — a button
keeps its height whatever sits inside it, icon, spinner or bare text.
Also here, from the same round of review:
- The chart's blue border was Tailwind's own `ring` utility colliding with a
component class of the same name. Renamed to `.metric-ring`. This was
dismissed once as a screenshot artefact; it was real.
- Page titles lost the `sm:text-3xl` (40px) an earlier bulk edit had appended
to 23 of them. The template's h1 is 30px.
- The users table has its actions back — edit, suspend, lock and delete — for
every seat that is not the owner, with the owner refused in the action itself
and not merely hidden in the markup.
DemoCustomerSeeder writes one complete customer as real rows: instance,
subscription, six seats across four roles, a backup, current-period traffic and
thirty days of samples with a deliberate wobble and one day at 286/288 checks.
Nothing in the panel is drawn from a fixture any more, so anything missing
shows up as missing. Removing the demo is one deletion.
Verified: 607 tests, and a Codex comparison of the two measurement sets —
"a person would call them the same design", the only difference a 1px gap.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Availability is now counted from our own monitoring answers. Uptime Kuma knows
the figure, but the REST bridge in front of it only answers "healthy, yes or
no", and waiting for the bridge to grow an endpoint would have left the panel
without the number indefinitely. The sync already asks on a schedule; counting
the answers gives a percentage that is ours and explainable.
An unanswered check is not a failed one — the counter only moves when a real
answer arrived, so our monitoring going down does not become the customer's
outage on the one figure they are asked to trust. An instance nobody has ever
checked shows no availability rather than 100 %.
The downgrade path existed nowhere. Going down is not the mirror of going up:
it can ask an instance to hold more than the target plan allows. Smaller plans
are now listed even when they cannot be taken, with the obstacle in the
customer's own numbers — "you have 31 users, this package allows 10" — because
a greyed-out button that does not name what is in the way is the thing people
ring about. Storage is checked against the last real reading rather than the
contractual allowance, or anyone who once bought a large plan could never leave
it. The limit is re-checked in the action: a rule enforced only in markup is
not enforced.
And the smaller corrections from this round:
- The cloud tab carried a hardcoded "B" as the instance's initial, and the PHP
and MariaDB versions, which tell a tenant nothing they can act on.
- "EU — Serverstandort im Angebot festgehalten" under a label already reading
"Serverstandort" was two sentences saying nothing. It is the country.
- Support promised a reply "binnen 4 Std." with nothing behind it. What is true
everywhere else is an answer on the same working day.
- The actions column appeared even when no row in the table had an action.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The panel could not show the storage ring or the transfer trend because nothing
measured them. instance_traffic keeps one row per billing period — right for an
allowance, useless as a series — and storage consumption was never sampled at
all, so the card could only ever state what was sold rather than what is used.
instance_metrics holds one row per instance per day, written by the traffic
collector on the visit it already makes. A second scheduler entry against the
same Proxmox API would have doubled the load and the failure modes for no gain.
Disk usage comes from `df` inside the guest rather than from Proxmox's own disk
figure, which reports the allocated image: that would show every customer a full
500 GB from their first day.
The rule the whole thing is built on: a reading that could not be taken is not a
reading of zero. The disk columns are nullable and left untouched when the guest
agent does not answer, so yesterday's figure stands instead of the ring dropping
to empty — which would tell a customer their data had vanished. Missing days
stay missing in the series rather than being filled with zeroes, which would
draw an outage that never happened. Both are covered by tests.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Card by card against the approved template: label with a chevron, the figure
and its unit on one line, a line of context underneath, a bar across the foot.
The order matches too — storage, seats, transfer, then the fourth slot.
Three of the template's four visuals have no data behind them, and the code now
says so where someone will read it rather than leaving the next person to
wonder why the charts are missing:
- Storage consumption is never sampled. The card states the contractually
agreed allowance instead of drawing a ring at an invented level.
- instance_traffic keeps one row per period, not a daily series, so there is
nothing to draw a sparkline from. The share of the allowance is real, so
that card carries a bar.
- monitoring_targets records a state and a check time but no uptime figure, so
there is no availability percentage to show. That slot carries the last
backup — the thing this product is about and can actually prove.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The dashboard was built to my own idea of the layout rather than to the
template that was signed off: a coloured pill where the template has a stamped
mono line, bare figures where it has a label with a chevron, a unit on its own
line instead of beside the number, and no ring at all. There is no point
agreeing a design and then building something adjacent to it. The metric card
is now a component that draws the template's form, and the pages use it.
Two more places were still showing data that does not exist:
- Support listed three tickets to every customer, complete with reference
numbers and dates. There is no ticket model; it was fixture text. A request
list also belongs in the console, where an operator can see who filed what.
Removed until there is something real behind it.
- The datacentre name reached the customer through the cloud tab's copy as
well. Customer surfaces name the jurisdiction; the building is operator
information.
And the actions column rendered an empty cell for the owner, who can be neither
re-invited nor revoked. An empty cell reads as a missing feature; it now says
so with a dash and a title.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The breadcrumb said Übersicht on every page. The sidebar and the breadcrumb
each built their own copy of the structure, so the layout had no way to know
which entry was current and fell back to the first one. Navigation::portal()
and ::console() are now the single definition, and currentLabel() matches on the
route name — which matters for the console, whose PATH changes between
host-bound and fallback mode while its route names do not.
The datacentre name is out of everything a customer sees, for the third time
and now at the source rather than in a template. Falkenstein is how an
operator places an instance; a customer's processing record names the
jurisdiction, and putting the building in customer copy means editing that copy
every time the estate grows.
Also swept the views onto the new scale: --text-faint is 2.8:1 and a decoration
token, but it was carrying table headers, hints and timestamps — text people
have to read. All of it moved to --muted, which is 5.0:1 and passes AA.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The console was a second product. admin-tokens.css held a complete dark set —
its own surfaces, its own orange, its own status triad — so every shared
component had to work in two worlds, and the two halves of the application
drifted apart in ways nobody could see from inside either one. That file now
carries density and nothing else: smaller type, tighter rows, tighter corners.
Colour comes from one place.
The tokens themselves are rebuilt around what the redesign settled on:
- Radii scaled to object size (9/11/16/22) instead of one value everywhere,
which is what made the interface read as a design-system specification
rather than as a product.
- Warm, broad, low shadows. A neutral grey drop shadow belongs to a different
design language and reads as cold on this ground.
- --accent-press, which several rules already referenced and nothing defined.
An undefined var() does not make a browser skip the declaration; it computes
to , and for background-color that is transparent — the accent button
lost its fill on hover and left white text on white.
- No serif. A serif headline is what made every page read as a document, which
is the impression the whole redesign exists to remove. --font-serif now
points at the sans so nothing breaks while call sites are cleaned up.
The two shells are one shell with two configurations, and both finally have a
mobile navigation: the sidebar used to simply disappear below 900px, leaving no
way to move around the application at all on a phone.
The customer dashboard is bound to real records — instance, seats, traffic,
backups, contract — instead of the fixtures it shipped with. Where something is
not measured, storage consumption, it says what was contractually agreed rather
than inventing a figure. This is the sheet a customer forwards to their auditor.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Safari zooms when a focused input is smaller than 16px, and then leaves the page
zoomed — so on an iPhone every form throws the layout about, and the way back is
a pinch. The usual fix is the meta-viewport switch, which suppresses the zoom by
disabling pinch-zoom entirely: it takes a real accessibility feature away from
everyone to solve a cosmetic problem for some. Sizing the fields at 16px on
touch devices removes the reason instead.
!important on purpose: it has to beat every text-size utility on every field in
the application, and a rule that loses to `text-sm` on one form is worth
nothing. Checkboxes and radios are left alone — no text to inflate, and sizing
them there breaks the box.
Also -webkit-text-size-adjust, so iOS stops inflating body copy in landscape.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The gateway is restarted twice in a deployment — once by `up -d`, then again
after the hub whose network namespace it lives in — and `docker compose exec`
into a container that is still coming up fails outright rather than waiting.
Twenty seconds did not cover that, so the first run of the new probe reported a
gateway that answers as down, and the resolver stayed out of client configs for
one more deployment.
The health site also now binds the hub address instead of only matching on it.
Nothing was published either way, but the file should do what its comment says.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The console has been unreachable over the VPN, and the cause was the readiness
probe rather than the tunnel. The gateway binds to the WireGuard hub address
alone; the probe asked 127.0.0.1, where nothing has ever listened. It could only
fail, so VPN_READY stayed false, and on that basis the application withheld the
`DNS = 10.66.0.1` line from every client config it issued. A phone then built
the tunnel, asked its normal resolver for the console hostname, got the public
address and had its connection closed — indistinguishable from "this site does
not exist", which is exactly what it looked like.
Probing over TLS on the bare address would not have worked either: the site
matches on the console's hostname, so a request without SNI is offered no
certificate. The gateway now answers a plain-HTTP health port on the hub
address, which removes TLS, SNI and name resolution from the question and
answers only what is being asked — is this gateway listening, in this network
namespace, right now. Caddy refuses to start when the certificate is unreadable,
so a health port that answers still proves the whole file loaded.
Also here, all found while looking:
- Icons pushed their label onto a second line and rendered a size larger than
asked for. Tailwind's preflight makes an svg display:block, and `.size-4` and
`.size-5` have equal specificity, so stylesheet order decided — and it emits
size-4 first. Every icon written as 16px was silently 20px. Recorded as R18.
- Four error pages printed `errors.404.hint` in place of a sentence: the lang
files give those codes a null hint and Laravel returns the key for a null line.
- The Developer role had no label in either language, so the dropdown showed
`admin_settings.role_developer`.
- The secrets area held one key, which is not worth a password gate. It now
carries the credentials that actually stop the business when they expire —
DNS, monitoring, SMTP — and the test button appears only where a checker
exists, instead of reporting on Stripe whatever was being looked at.
- The update button said nothing about when a queued run would start or where a
running one had got to; both are now shown, and a failure names its step.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An empty 404 is itself information: it says something terminates TLS here and
chose not to answer. The console and the websocket endpoint now close the
connection instead, which is what a hostname that serves nothing looks like.
The websocket endpoint answers a genuine upgrade — verified live, 101 — and
nothing else; a browser opening it gets a closed connection.
Reviewing that turned up two holes that mattered more than the thing being
reviewed.
The compose defaults published the application and Reverb on every interface.
Docker publishes ports ahead of UFW, so those backends were reachable from the
internet with the firewall closed — and reaching a backend directly skips the
proxy, and with it every hostname and address rule keeping the console private.
The defaults are loopback now, and an update rebinds an existing installation
that is behind a proxy actually running and holding 443. A development box
without one is left alone, because taking its port away would look like the
machine had broken.
And the console's own "open" switch was emitting 0.0.0.0/0 into the proxy's
allowlist. One click would have put the console on the public internet, which
is the exact state the owner's rule exists to prevent. Switching it off relaxes
the application's check; the proxy keeps its list, always.
The reference proxy config carries the arrangement: QUIC early data off, since
an address-based decision taken on 0-RTT can answer 425 and some browsers do
not retry — an intermittent lockout from the console is the worst kind — and
explicit handling for plain HTTP, whose automatic redirect otherwise announces
both hidden names to anyone who asks.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two things reported success while the tunnel console was unreachable.
The services were restarted the moment the hub container counted as started,
but the hub brings wg0 up as part of its start command — so they were binding an
address that did not exist yet. They now wait for the interface.
And readiness was a container-state check. A container can be up and running
while the process inside it listens in a network namespace that was torn down
underneath it: nothing errors, the address simply refuses connections, and
"running" reports everything fine. It asks the gateway now, and only a real
answer counts — because the consequence of getting this wrong is a client
config naming a resolver that is not there, which takes the device's whole name
resolution with it for as long as the tunnel is up.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Both VPN services share the provisioning container's network namespace, and a
process holds the namespace it started in. Restarting the hub — which every
deploy does, to pick up new code — therefore leaves them listening inside a
namespace that no longer exists.
Nothing errors. The containers stay up, Caddy's log still reports it is serving
on the tunnel address, and connections to that address are simply refused. It
looks precisely like a gateway that never worked, which is how it presented on
the live server after the first successful start.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The dnsmasq image was pinned to 2.90-r0, which is not published. The gateway
therefore never started — correctly reported as not ready, so no client was
handed a resolver that was not there, but the tunnel console did not come up
either.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The owner's phone shows a blank page on the VPN. That page is the reverse proxy
refusing the request, and it refuses because the phone is not on the tunnel: the
client config routes only the management subnet, so a request to the console's
public hostname leaves over the mobile network and arrives from a carrier
address. It is also why the peer reads "last contact: never" — WireGuard only
handshakes when it has traffic to send, and nothing is ever routed in.
The obvious fixes are both wrong. Adding the server's public address to
AllowedIPs routes the WireGuard endpoint into the tunnel it is trying to
establish. A public DNS record pointing at 10.66.0.1 publishes the internal
subnet to anyone enumerating the domain — the owner raised that himself, and he
was right.
So the console is served INSIDE the tunnel instead. A small resolver and a small
gateway share the hub container's network namespace, which is where wg0 lives,
and answer on 10.66.0.1 directly. A client therefore needs no route beyond the
subnet it already has, the host's docker bridge is never exposed, and the
request reaches the application with its real 10.66.0.x source — which is what
the console's own allowlist checks. The gateway reuses the certificate the
public Caddy already renews: a certificate is bound to the name, not to the
address serving it, so nothing new is issued and nothing internal reaches a
public zone.
Most of this commit is the arithmetic of not lying about it. Review found
fourteen ways the arrangement could report itself working while it was not:
enabling the compose profile after the services were started rather than before;
starting a gateway with empty certificate paths, which can only crash; treating
"container created" as "container running"; carrying a stale readiness marker
through a failed restart; reusing the previous hostname's certificate after a
rename; leaving the profile enabled when the hostname was cleared, in a script
that exits early precisely when nothing else would fix it; reading the renewal
timestamp as a user who cannot traverse Caddy's storage; and a `find | head`
that aborts the whole installer under pipefail the moment two issuers hold a
certificate for the same name.
One of them was mine and worth naming: to let the container read the
certificate, I had made the TLS private key world-readable. On a multi-user host
that hands the console's identity to every local account.
The client is told about the resolver only when both services are confirmed
running, because a config naming a resolver that does not exist takes the
device's entire name resolution with it for as long as the tunnel is up.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The page shown while the site is hidden was still in the old style — a coloured
square and system fonts — on the two hostnames a visitor is most likely to try.
It now uses the site's own plate, typeface and registration marks, still
entirely self-contained because it is shown precisely when the asset build may
not exist. Both it and the error pages lighten the accent in dark mode: the tone
is chosen for contrast against paper, and on the ink plate the small text is the
first thing to stop being readable.
The VPN investigation ended somewhere useful, and not where it started.
The blank page on the phone is the reverse proxy refusing the request — `respond
404` sends no body. It refuses because the phone is not on the tunnel: the
client config lists only the management subnet in AllowedIPs, so a request to
the console's public hostname goes out over the mobile network and arrives from
a carrier address. It also explains "last contact: never", since WireGuard only
performs a handshake when it has traffic to send, and nothing is ever routed
into the tunnel.
The obvious fix — add the server's public address to AllowedIPs — is written
down here as a comment and a test rather than as code, because it cannot work.
The WireGuard endpoint is that same address, so routing it into the tunnel
routes the handshake packets into the tunnel they are trying to establish. The
result is a loop and a connection that never comes up: the same blank page, now
with no way in at all.
Reaching the console over the VPN needs an address INSIDE the subnet — the proxy
answering on the hub address, and a name that resolves to it. That is a
deployment change, not something a config line can express.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Changing a key meant a shell, a file edit and a cache rebuild — and the person
who owns the Stripe account is not necessarily the person who owns the server.
Two gates, not one. The capability decides who may open the page; every operator
has console.view, and that must not mean "can read the payment key". The
password decides whether this SESSION may see or change anything, because the
realistic threat is not a stranger but an unlocked machine, and a session is
exactly what that hands over. Both are re-checked server-side on every action —
a Livewire action is reachable by anyone who can post to /livewire/update.
The value is stored encrypted under a key of its own, SECRETS_KEY, and the vault
refuses to work without it rather than falling back to APP_KEY: rotating APP_KEY
is ordinary maintenance and would otherwise destroy every stored credential,
discovered when Stripe stops answering. It is read where it is used, not
overlaid onto config at boot — an overlay adds a query to every request
including the public site, and leaves queue workers holding whatever was true
when they started. It is never shown again, only outlined, and never enters a
Livewire property that would carry it to the browser and back in the snapshot.
A registry, not an env editor: a form that can set any environment variable is a
privilege-escalation primitive, and one bad value bricks the installation with
no way back through that same form.
The test button is the part that matters. It reports which Stripe account the
key belongs to, whether it is LIVE or test — the most expensive mistake here is
pasting one where the other belongs, and both look identical in a form — and
which webhook endpoints exist with the events each subscribes to. A key can be
perfectly valid while the endpoint listens for the wrong five events, and
nothing fails until a payment goes unrecorded.
The webhook signing secret deliberately stays in .env. It is read on every
incoming payment event; in the database, a database problem becomes silently
failing signature checks.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Clicking Save made every button on the console's settings page appear to fire.
Seven `wire:loading.attr="disabled"` had no `wire:target`, and without one
Livewire applies the loading state to ANY request on the component — so one save
put all of them into their disabled state simultaneously. Each names its own
action now.
Two-factor for customers. Fortify's endpoints already existed; only the screen
was missing. Setting up requires re-entering the password first, and every
action re-checks that server-side rather than relying on the button not being on
screen — a Livewire action is reachable by anyone who can post to
/livewire/update. The confirmation marker is Laravel's own session key, so it
and the framework's password.confirm middleware mean the same thing rather than
drifting apart.
The secret never enters a Livewire property. Component state travels to the
browser and back in the snapshot; the QR image is derived from the secret, the
secret is not in it — and there is a test that says so.
The status page moves to the ROOT of its hostname: status.clupilot.com/status
says the same word twice. That needed the domain-bound `/` registered BEFORE the
landing page, because Laravel takes the first match and the landing route is
host-agnostic — so the status host would have served the marketing site.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
STATUS_HOST binds /status to a single hostname. Every other host redirects
there rather than 404ing: a status page is the one address people keep in a
bookmark and reach for when something is already wrong, so breaking old links
to prove a point about separation would be exactly backwards. Unset, nothing
changes.
The /legal/status redirect goes through route() instead of a literal path. A
relative redirect lands on whatever host the visitor is already on — which,
once the page has a hostname of its own, is precisely where it no longer
answers.
The installer told the operator to point Stripe's webhook at the customer
portal. Stripe posts server-to-server and never sees the portal; the endpoint
is the api hostname, which the installer never even asked for. It asks now, and
prints the address that actually receives the events. Getting this wrong does
not fail loudly — payments simply stop being recorded.
It also writes ADMIN_HOST_EXCLUSIVE=false on a fresh install. Switching the
console onto its own hostname before the DNS for it exists makes the console
unreachable under any other name, and that is not a thing to have on by default.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three gaps, all of the "half-built" kind.
Nobody could change a password. Fortify's updatePasswords feature was switched
off, so an account created with a generated password kept it until someone
opened a shell on the server — including the owner's own. Both settings pages
have the form now, sharing one concern, because two copies of a password rule is
how one of them ends up weaker. It goes through Fortify's own action rather than
hashing here, and the current password is required: an unlocked machine should
not be two keystrokes away from locking its owner out.
The datacenter edit form had no active switch. The column and the scope existed,
and the list page has a toggle — but the form you open to change the thing did
not offer the one lifecycle action a location actually needs. Switching one off
now says what it does NOT do: existing hosts keep running. Once, on the actual
transition, and as the only message — the generic "saved" toast would otherwise
replace it, and an already-inactive location would have announced its own
deactivation every time its name was edited.
The staff table's actions cell is empty for your own row, because you cannot
revoke yourself. With a one-person team the column was therefore always blank
and read as broken rather than as a rule.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The console was unreachable, and not for the reason it looked like. Two causes,
both mine.
A failed `artisan optimize` — the one that hit duplicate route names — left a
broken route cache behind, so every request to the console host answered 500.
Rebuilt.
Underneath that: the reverse proxy has its own console allowlist, hard-coded,
and it runs BEFORE the application. Everything added on the console's own
access page was therefore ineffective, and when the owner's address changed
they were turned away by the proxy before reaching the page that would have
fixed it. The proxy now imports a fragment generated from the same list the
console manages, regenerated by the host agent and reloaded when it changes.
Getting that safe took most of the review. It refuses to rewrite an ambiguous
Caddyfile rather than replacing some other site's matcher; it never falls back
to a loopback-only list when the application cannot be reached, because that
list validates cleanly and locks out every remote operator; it retries a reload
that failed instead of assuming it worked; and an installation that upgrades
without rerunning the installer is told, because otherwise the whole mechanism
is invisibly absent.
Prices are entered in euros. The form asked for cents, so €799 was typed as
79900 and one slipped digit was a factor of ten on an invoice. Conversion
happens in one place, on the string rather than through a float — (float)
'79.90' × 100 is 7989.999… and casting truncates to 7989, one cent short on
exactly the prices people charge — and it refuses an amount the column cannot
hold instead of failing at the database.
Every error code has a page now, in the site's own language and typeface,
self-contained so it still renders when the asset manifest is the thing that
broke. There was only a bare white 404.
The VPN list stops being a seven-column table nobody could fit: names broke
across two lines and so did the headings. These are attributes of one access,
not quantities compared down a column, so each access is a row — identity on
one line, measurements in mono on the next.
The status page says what it measures rather than what it promises. "New orders
are delivered without failures" read as a marketing claim on a page whose only
job is to be believed, and said nothing about the last 24 hours.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Registering the console once per accepted hostname reused one set of route
names, and Laravel refuses to serialise two routes under the same name — so
`artisan optimize` failed on the live server the moment the separation was
switched on, mid-deploy.
Only the canonical registration carries the `admin.` names now; the alternates
answer under `admin.viaN.*`. They exist to be MATCHED — they are the addresses
someone locked out reaches for — never to have URLs generated for them, so
route() keeps producing the canonical hostname.
That renaming then broke every exact route-name check, which is how the console
navigation decides what is active: reached through a recovery address, nothing
in the sidebar was marked, exactly when something is already going wrong. The
check goes through AdminArea now and matches either form.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Fortify sends every successful sign-in to config('fortify.home') — /dashboard.
That is why an operator signing in ended up in the customer portal, and once
the console has a hostname to itself it stops being merely confusing:
/dashboard does not exist on that host, so signing in would land on a 404.
Three outcomes now, decided by where the sign-in happened and who signed in:
the console for an operator on the console, the portal everywhere else, and for
a non-operator on the console the session is taken away again at the moment it
was created — a guard that merely refuses each page afterwards leaves that
session in the browser.
Four things the review caught, each of which would have left a hole:
- Fortify never reaches LoginResponse when a two-factor challenge was involved.
Binding only that one left exactly the accounts most likely to be operators
on the old behaviour, so both exits are bound and share one decision.
- The JSON branch ran before the authorization check, so a JSON client kept a
session a browser would have lost.
- The two exits do not share a JSON success contract — an ordinary sign-in
answers {"two_factor":false}, a completed challenge answers an empty 204 —
and merging them breaks a client keying off the status code.
- In shared mode everyone posts to /login, so the request never looks like the
console even when /admin is the destination. The intended URL is read too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three things the owner asked for, and one the review found underneath them.
The console leaves /admin. It has its own route file now, registered before
routes/web.php because once it has a hostname to itself it sits at the ROOT of
that host — where `/` and `/settings` also exist for the portal, and the first
matching route wins. Where it mounts is one decision in one place: `/` on the
console hostname where it has one to itself, `/admin` on any host otherwise.
Names stay admin.* in both modes, so nothing that builds a URL has to know.
Exclusivity is its own switch, not a consequence of having a hostname. The
first attempt made "this host is the console" follow from ADMIN_HOSTS, and a
development machine lists its own IP there so the console works without DNS —
which took the public site and the portal off that machine entirely. The
switch also registers the console on every listed hostname, canonical last, so
the alternates that exist as recovery paths keep working.
The status page moves out of /legal, where it sat beside the imprint and the
terms. Nothing about the current health of the platform is a legal document. It
is a real page now: portal, instances, provisioning and backups, each derived
from records, aggregate only, and a component with no signal reports "unknown"
rather than "operational".
That last rule is what exposed the real bug. monitoring_targets.status was
written once — 'up', at provisioning — and nothing ever updated it. Both the
console's notices and the new public page read it, so an outage would have been
published as healthy indefinitely. There is a sync job now, on a five-minute
schedule, and a checked_at column so a verdict can go stale instead of standing
forever.
The monitoring contract had to grow a third state for that to be honest.
isHealthy() answers true when no monitoring is configured and false when the
monitor is unreachable; recording that boolean would have published either a
fleet-wide all-clear nobody measured or a fleet-wide outage that was really one
broken monitor. health() returns null for both, the recorder leaves the old
verdict to go stale, and isHealthy() keeps its forgiving semantics for the one
caller that wants them — the provisioning acceptance check, which must not fail
a delivery because monitoring is not set up.
Backups are counted from the instances that need protecting rather than from
the backup rows that exist, so an instance with no schedule at all cannot be
missing from the arithmetic that declares the estate protected.
Also: the update panel polls itself, offers the button only when there is
something to install, and opens the log while a run is in progress.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The panel had no way to update the installation, and could not have one on its
own: it runs as www-data inside a container, and the update restarts that
container. A button that shelled out would kill its own web server
mid-response, and would need the application to hold host-level credentials —
a far worse thing to own than an out-of-date checkout.
So the button is a mailbox. The panel writes a request into the checkout; a
systemd timer on the host, running as the service account, consumes it, runs
deploy/update.sh and writes back what happened. The same timer answers the
question the panel cannot answer alone — is there anything to update — which
needs a git fetch, and therefore credentials the application does not have.
The parts that were wrong before review, all of which would have shipped as a
button that looks fine and does nothing:
- The agent was only installed by install.sh, which the installed base never
runs again. Every existing server would have shown the button permanently
disabled. It has its own root entry point now, install.sh delegates to it,
and update.sh says so when the unit is missing.
- On a release-pinned server the checkout is detached, so it followed
"origin/HEAD" and then ran an update that deliberately stays on the pinned
tag: updates advertised, nothing applied. It now compares TAGS in release
mode and passes the target release through.
- On a branch other than main it advertised that branch's commits and then
deployed main's, because update.sh defaults to main.
- A request written while the agent was down was executed whenever the agent
next started, days later.
- A single status file meant the routine five-minute check overwrote a failed
update with "idle" before anyone saw it.
- An agent that had been stopped left the button enabled forever, because a
status file written once counted as an agent.
- The agent's error messages were German strings rendered into an English
interface; it reports codes now and the panel translates them.
Also: the add-address button in the console-access panel was as tall as the
field plus its hint, because the hint was a sibling inside the flex row.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The hostname guard, the network allowlist and the public-site switch each
decided for themselves, by testing the path against admin/*. That works only
while the console sits under /admin. It is also a trap: the moment the console
moves to the root of its own hostname, PublicSiteGate stops recognising it, and
with the public site hidden the console answers 503 to the very person trying
to sign in and switch it back on. The guard does not fail loudly — it silently
stops matching.
AdminArea is now the single answer. It has two modes and no third: a console
hostname is configured, in which case the console IS that host and answers at
its root; or nothing is configured, in which case the console stays under
/admin on any host exactly as before, so upgrading cannot lock anyone out of a
system that was working.
RestrictAdminHost gains the half it was missing. Binding console routes to a
hostname does not stop the customer routes from answering there too, because
they are registered without one — so the console's hostname would still serve
portal pages wherever the paths did not collide. It now enforces both
directions, with the endpoints both sides genuinely share written out as a list
rather than inferred.
Nothing changes yet for an installation with no ADMIN_HOSTS set, which is every
development machine and every fresh checkout.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three console pages were fiction. The front page claimed 42 customers, 39
instances, four hosts named pve-fsn-1..3 and €7,842 a month, over a twelve-month
growth curve; the instance list held seven invented machines; the revenue page
reported churn and a trend for a business with no recorded history. All of it
was hard-coded. It read like a running company and measured nothing.
They now read the database. Two figures are gone rather than approximated —
the revenue trend, which needs a monthly history nobody records, and churn,
which needs a base the data cannot supply. ARR stays, labelled as the
projection it is. The green "all systems normal" badge is computed from the
notice list instead of asserted, and the notices themselves come from failed
runs, hosts reporting errors or gone quiet, and monitoring that is down.
Host load is the one number that had to agree with something else: placement
counts the VM disk allocation, ignores a failed instance that never got a VM,
and subtracts the host's reserve. A dashboard doing its own arithmetic would
show a host as comfortable while orders were already being refused on it, so it
uses the host's own accounting — with the filter moved into a scope both share,
and the sum preloaded so listing hosts stays one query.
The instance list drops the Nextcloud version column: that version is not
recorded anywhere, and a column filled with a plausible number is worse than no
column. Statuses the lifecycle writes but nobody had translated no longer
render as "admin.status.failed".
The price sheet also gains the included traffic, which the catalogue has always
carried and the page simply never printed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The marketing page was a generic centred hero in the system font stack: it
neither used the design system the console is built on nor looked like the
product it sells. Rebuilt around what CluPilot actually promises — security you
can produce evidence for — so the page reads as a controlled technical
document: a specification plate instead of a hero image, numbered sections, an
audit register with rhythm and proof per measure, and a price sheet rather than
floating cards. IBM Plex Serif joins Sans and Mono as the display voice, self
hosted as static files so the public page renders even without the Vite build.
The prices were written into the page by hand, and the page and the catalogue
had already drifted apart on three of four plans: the site advertised 249 € for
a plan the checkout charges 399 € for. The sheet now reads the catalogue, like
every other caller — including the currency, which is configurable and was also
hard-coded here.
The catalogue fails loudly on purpose; a public website must not. A broken or
overlapping catalogue is caught in the controller alone: the page still
renders, the sheet is replaced by "on request", and nobody is quoted a number
the checkout would not honour.
The sign-in and registration panels shared a copy-pasted orange gradient. They
now share one component and the same ink plate as the site, so the two halves
of the product no longer look like two companies.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The allowlist is managed in the console, which is fine until the address you
manage it from changes — and then the page that would fix the problem is the
page the problem blocks. Every gate needs a door that does not depend on
itself, and on a server that door is a shell:
php artisan clupilot:console-access show
php artisan clupilot:console-access allow 203.0.113.7
php artisan clupilot:console-access open
The address check moved to RestrictConsoleNetwork::isNetwork() so the command
and the console apply the same rule. Codex caught the version that did not: a
typo like 203.0.113.9/99 was stored, reported as success, and matched nothing —
leaving whoever was recovering still locked out, now believing they were not.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
RestrictAdminHost answers under which NAME the console responds — and the
caller picks the Host header, so it can never answer who is asking. This does:
a network gate on the client address, which behind a trusted proxy is not
something the client chooses.
The management VPN is always in the list and cannot be removed — it is the one
way in that survives a bad entry. Beyond that the owner keeps their own
addresses in the console, because being away from the VPN should not mean being
locked out, and the person who needs to change that list is the person sitting
in front of it.
Two refusals rather than warnings, since by the time a warning renders the
request that would show it has already been rejected: switching the restriction
ON is refused unless the address doing the switching is already covered, and
removing the entry you are sitting behind is refused. Entries are validated as
an address or CIDR — a typo that matches nothing is how someone locks
themselves out while believing they have not.
404, never 403.
Registered as persistent Livewire middleware, and verified in a browser that it
holds there: with the settings page open, narrowing the list turned the next
action from 200 into 404. Codex read the path guard as skipping
/livewire/update; Livewire in fact replays middleware against a duplicate of
the request carrying the original component's path, so the guard matches and
the client address is preserved.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Livewire re-applies only the middleware on its persistent list when an action
posts to /livewire/update. Its defaults cover auth; ours were not on the list —
only RestrictAdminHost had been added. So EnsureAdmin and EnsureCustomerActive
guarded the PAGE and not the actions, and the page is not where the actions run:
a signed-in non-operator who could reach the admin host could drive console
components, and a suspended customer could keep driving the portal.
Found by Codex while reviewing the domain-separation design, and confirmed
against Livewire's own default list in vendor.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The gate exempts admin/* so the console keeps working, but /admin sends a guest
to /login and /login is not the console — so with the site hidden and no VPN
yet, an operator cannot sign in to flip the switch back. Found while bringing
up the live server.
The mechanism for it already exists and is the right one: TRUSTED_RANGES. What
does NOT work is exempting the login flow by hostname, which was the obvious
patch — a Host header is chosen by the caller, so one forged header would have
lifted the gate for every route, portal included. Codex caught that; the comment
now says why the narrow-looking option is the wrong one.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The file is sourced, so ADMIN_NAME=Boban Blaskovic is read as a command and
dies with "Blaskovic: command not found" — naming neither the file nor the
variable — and set -e ends the install there. A display name with a space is
entirely ordinary; the example just happened to use "Administrator", one word,
so nobody hit it.
Found while installing on the live server.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The map listed only *.dev.clupilot.com, with the production names commented out
under "add the real public hostnames here before launch". Launching without
them removes the outer of the two layers that keep /admin off the public
internet — the ADMIN_HOSTS check in the app would still answer 404, but the
whole point of the pair is that neither is relied on alone.
admin.clupilot.com stays out of the list on purpose: the list names the hosts
that are PUBLIC, and the console is not one of them.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Found by running it on a fresh Debian 12 with systemd, no docker, no git and no
users — which is the first time it has ever been run anywhere.
`optional_env` ended in `[[ -n "$2" ]] && set_env …`. With an empty value the
function returns 1, and under `set -e` that ends the install, silently, with a
half-written root-owned .env. Absent is the NORMAL case for those variables —
they are the optional ones — so this killed every installation that did not
happen to supply a Hetzner token. An `if` returns 0 and does not.
Then it waited for `php -v` before migrating. PHP answers in seconds; the
entrypoint is still running `composer install` on a fresh checkout, which takes
minutes. So `artisan migrate` ran against a checkout with no vendor/ and died
on a missing autoload.php. It now waits for vendor/autoload.php, exactly as the
dependent containers already do, and says where to look if it never appears.
After both: exit 0, 59 migrations applied, the plan catalogue seeded and
consistent, the Owner account created with its role, and the portal answering
200 while the console redirects to login and the unconfigured Stripe webhook
fails closed with 400.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
VERSION at the repository root is the release number and the only place it is
written down — a file rather than `git describe`, because a source archive, a
shallow CI checkout and a container built without .git have no tags to
describe. Cutting a release is editing that file and merging it; CI creates the
annotated v<VERSION> tag once green, only on the commit that raised the number,
and never moves it. Servers are pinned to these.
Two modes, and the difference is the point. RELEASE=v1.0.0 pins a server to an
immutable tag, checked out detached: it moves when someone decides it moves.
BRANCH=main follows the edge, where CI tags a commit only after it is pushed.
The mode is remembered, so re-running the updater on a pinned box does not
quietly walk it back onto main.
Going backwards is refused, by commit ancestry rather than by comparing version
strings — a tag can be cut from anywhere, and only ancestry says whether history
is going back. The schema has already moved forward by then, and the migrations
needed to reverse it are not in the older checkout at all.
What the console reports comes from a manifest written atomically after every
step succeeded, never from live git: git says what the files are, not whether
the deployment came up. So a failed update keeps reporting the version that is
actually serving — including its version number, not the newer one the checkout
has already moved to. A deployment pinned to the tag reads "1.0.0 (abc1234)";
anything else reads "1.0.0-dev (abc1234) · main", because every commit after the
tag still carries VERSION=1.0.0 and is not that release. Reporting it as one is
how a bug gets filed against the wrong code.
Codex reviewed the design before it was written and the result six times after.
Its findings, all real: the version had to come from the manifest too, not just
the commit; branch names need JSON escaping or the manifest silently vanishes; a
`case` glob does not anchor and accepted 1x.2y.3garbage; pinning to the commit a
server already sits on skipped recording the mode, and then skipped detaching;
a manifest that failed to write would never be repaired; an unparseable
timestamp would 500 every admin page; and an empty tag list read as a
connectivity failure.
466 tests green.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The installer clones BRANCH, which defaults to main — and the repository has
no main. Git's own "Remote branch not found" reads like a bad token or an
unreachable server, and the branch is the one thing here that is routinely
wrong. It now asks first and, when the branch is missing, prints the ones that
do exist and how to pass one.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
It still named two webhook events; the application handles six, and the four
new ones are the billing cycle itself — renewals, failed payments, status
changes and endings. It also said nothing about stripe:sync-catalogue, without
which Stripe has no prices and nothing can be sold at all.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two findings from reviewing all five phases together rather than one at a time.
The webhook held every event a handler answered `null` to — but `null` also
means "already recorded" and "deliberately skipped", which is every checkout's
own invoice and every redelivered renewal. Their contract is right there, so
`replayHeldFor()` could never come back for them, and ordinary Stripe traffic
silted up the holding area until the weekly prune. It now holds only what it
genuinely cannot match — and if the contract appeared in the meantime, applies
the event instead of dropping it: the creation race is narrow, but losing a
cancellation to it would leave us serving someone who had left.
Also fixes a rollback that predates this work and blocks `migrate:fresh` on
MariaDB entirely: dropping the unique index on customers.user_id fails while
the foreign key added one migration earlier still depends on it. Verified by
building all 33 migrations from nothing on MariaDB, rolling every one of them
back, and building them again.
458 tests green. Codex clean on the full branch diff.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A Product per plan family and a Price per priced row of a published version,
plus the four subscribed webhook events that were arriving and being ignored.
`stripe:sync-catalogue` mirrors the catalogue. Idempotent twice over: a stored
id is skipped, and each call carries an idempotency key derived from our own
row, so a crash between Stripe creating a Price and us recording its id gives
back the same object rather than a second one. That matters more here than
usual — a Stripe Price cannot be edited or deleted, so a duplicate is
permanent. Drafts are not synced at all: a version that has promised nothing
has no business in a price list. --dry-run shows what would be created.
The webhook now handles invoice.paid, invoice.payment_failed,
customer.subscription.updated and customer.subscription.deleted. It never
re-derives an amount: the invoice is the authority for what was charged, and
recomputing it from our catalogue would produce a second, disagreeing answer.
A failed payment is recorded and nothing else — Stripe runs the dunning
schedule, and cutting a customer off on the first failure would punish an
expired card as though it were a refusal to pay.
Only a cycle renewal moves the term on. Stripe also sends paid invoices for
prorations and manual charges, and the checkout's own invoice — which is
already in the register as the purchase, and would otherwise double every
customer's first payment.
Stripe does not guarantee delivery order, which is the source of most of the
care here:
- state changes are judged and written in one transaction with the row held,
so two deliveries cannot both pass a check made on a stale copy;
- an older event never overwrites a newer one, with a rank breaking ties
between events sharing a second — their timestamps have one-second
resolution, and a failed attempt and its successful retry routinely do;
- a term is never shortened, and an ended contract is never revived;
- an event for a contract that does not exist yet is HELD and replayed the
moment it appears, rather than acknowledged and forgotten. A cancellation
dropped that way would leave us serving someone who had already left. Held
rows that never match are pruned after a week.
Register entries are keyed by what they are about — the invoice, the attempt,
the subscription — with a unique index doing the work, because a check two
concurrent deliveries can both pass is not idempotency.
PlanChange is now documented as the preview shown before someone confirms, not
the invoice: Stripe's proration accounts for tax, existing credit and the exact
second the change lands, and ours cannot.
Not run against the live account — `stripe:sync-catalogue` creates objects that
cannot be deleted, so that is the owner's call. The dry run lists 12.
457 tests green. Codex review clean after seven rounds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two things the contract could not answer on its own: what happened, and what
the customer's whole bill is.
`subscription_records` is append-only, one row per commercial event. Flat
columns for everything searched or relied on as evidence — event, customer,
subscription, plan family and version, term, net/tax/gross, currency, tax rate,
reverse charge, Stripe ids — PLUS a versioned JSON copy of the whole snapshot.
Not JSON alone: you cannot query it, and "the amount is in there somewhere" is
poor evidence. Copied, not joined, so a row still answers after the customer,
the plan or the version have gone.
The flat columns describe the TRANSACTION. Gross is what was actually taken;
net and tax are that gross split by the rate that applied on the day. A
discount lowers the taxable amount rather than creating negative VAT, and a
free checkout is recorded as free instead of as paid in full. What was agreed
sits beside it in the snapshot, so a charge that differs from the catalogue is
preserved as a question rather than reconciled away.
The register refuses to be rewritten, in bulk as well as one row at a time —
model events do not fire for `query()->update()`, which is exactly the shape a
careless data fix takes.
`subscription_addons` carries the owner's rule: a customer's total is their
subscription plus their modules, and all of it is frozen at what was agreed.
Price protection covering only the plan would let a module quietly double for
someone who booked it two years ago. A module they have NOT booked is a sale
still to be made, at today's price — so the catalogue is consulted only for
what is not in this table. Several bookings of one module are summed rather
than reduced to one arbitrary row, or the page and the bill would disagree.
Concurrency: one order books one module, enforced by a unique index rather than
a lookup two retries can both pass; cancellation is an atomic claim; and each
booking commits with its own register entry, so a failure cannot leave a sale
without evidence and a retry that finds the booking cannot skip the event.
Verified in the browser: with the module raised from 29,00 € to 59,00 € in the
catalogue, the customer who booked it still sees 29,00 € and a total of
208,00 €, while a new customer is quoted 59,00 €.
436 tests green. Codex review clean after seven rounds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The owner can now do from the console what only a config edit could do before:
create a plan line, draft a version, price it, publish it into a window, and
pull a plan out of the shop.
Two pages and one modal, because the catalogue has exactly two levels. The
plan list is a name, a rank and a kill switch. Everything that can be got
wrong — capabilities, prices, windows — lives on the versions, where the page
is built around the one rule that matters: a draft is freely editable, a
published version is not touchable at all. So drafting and publishing are
separate acts, and publishing says plainly that it is final.
The console refuses everything the catalogue refuses, on the form rather than
as a stack trace: an overlapping window, a window that ends before it starts,
a version with no price for a term we sell on, and — new here — a version with
no VM template, which would be bought and then fail provisioning every time.
Numbers are bounded on both sides, because a mistyped price otherwise
overflows the column and answers with a 500 instead of saying which field was
wrong. Performance class and features are picked from the keys we have labels
for; free text would be frozen at publication and shown to customers as a raw
translation key forever.
Concurrency, since two admins share one catalogue: draft numbers are allocated
under a lock on the family, publication is an atomic conditional claim, and
discarding a draft is one statement conditional on it still being a draft —
otherwise a draft published in the meantime could be deleted out from under
the customers now contracted to it.
`plans.manage` (Owner and Admin) guards the pages themselves, not only the
buttons, and the modal authorises itself — prices, drafts and unreleased plans
are not something to leave readable to anyone who types the URL.
Also fixes the shared checkbox, which ticked in the browser's own blue on
every page that used one: a native checkbox ignores text colour and needs
accent-color.
Verified in the browser: withdrawing a plan in the console removes it from the
customer's billing page immediately, and restoring it brings it back. The
public landing page carries no catalogue-driven plan list, so there is nothing
there to hide.
421 tests green. Codex review clean after six rounds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Plans lived in config/provisioning.php, where the owner cannot reach them and
where a plan has no history. They now live in plan_families / plan_versions /
plan_prices — a name that never moves, what the plan WAS at a point in time,
and a price per version and term with its own Stripe Price id.
- Availability is computed on every read (available_from <= now < until,
half-open, UTC) plus a per-family sales kill switch. Nothing schedules a plan
into or out of sale: a job that fails to run is a plan that silently
misbehaves.
- Overlaps crash rather than resolve. currentVersion() uses sole(), and
scheduling takes a lock on the family and rejects an overlapping window —
two versions on sale at once would decide a customer's price by row order.
- A version is frozen from publication, not from first sale, and so is its
price: a checkout is not instant, and an amount edited between the session
opening and the webhook landing would contract someone at a price they were
never quoted. Repricing publishes a new version, as Stripe requires anyway.
- Neither a published version, its price, nor a family with customers can be
deleted, and a family key cannot be renamed. All of those would null the
provenance off existing contracts.
- Subscriptions and orders record plan_version_id. A historical reference
resolved by plan NAME hands back today's terms, which is the split-brain one
level up. A checkout that carried its version is honoured even after the
window closes — they paid for what they were shown.
Switched atomically and failing closed: config('provisioning.plans') and
plan_features are gone, and nothing falls back to them. A fallback would
resurrect a plan the owner had just switched off. The seed lives in the
migration, and PlanCatalogueTest pins what the config catalogue sold as the
shadow comparison. `php artisan plans:check` reports overlaps, gaps and
missing prices before a customer finds them.
Contract-backed displays, which were reading the live catalogue:
seat limits, the cloud card, the plan card, and admin MRR — the last three now
divide a yearly contract down via Subscription::monthlyPriceCents(), since all
three label the figure per month.
Two recovery gaps closed along the way: the order now commits before the
contract is opened (so a contract failure can never erase the record of a
payment), a Stripe retry repairs a missing contract and restarts a run stranded
with no_subscription, and TickProvisioning sweeps runs left pending by a crash
rather than only running/waiting ones.
402 tests green. Codex review clean after thirteen rounds. Verified in the
browser: portal, billing and console render unchanged off the new catalogue.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The pipeline re-resolved config('provisioning.plans') by order.plan, so the
subscription snapshot protected a customer's price but not their machine:
shrinking a plan resized an existing customer's VM on its next run. Nothing
created a subscription either, so closing this meant opening the contract at
purchase and pointing provisioning at it.
- OpenSubscription freezes the catalogue onto a subscription when a checkout
is paid; StartCustomerProvisioning calls it inside the order transaction.
- CustomerStep::plan() reads the frozen snapshot. ValidateOrder and
ReserveResources fail closed with no_subscription rather than falling back
to the catalogue, which is the bug itself.
- template_vmid joins the snapshot so a re-clone cannot pick up a blueprint
published after the sale. Deliberately outside FROZEN: it is how we build
the machine, not a term the customer is owed, and a dead template must be
replaceable without cancelling a contract.
- TrafficMeter reads the allowance off the contract too — cutting a plan's
traffic was otherwise enough to start throttling someone who bought more.
- The migration backfills contracts for orders that already bought something,
reconstructed from what was actually delivered where an instance exists,
and adopts an existing order-less contract instead of opening a second.
Orders paid in a currency the catalogue cannot price get none, matching the
checkout path.
price_cents stays the catalogue's NET price, which is what PlanChange
prorates against — not Order::amount_cents, which holds Stripe's GROSS total.
Reconciling the two belongs to the proof register and Stripe (phases 4/5).
Also pins STRIPE_WEBHOOK_SECRET blank in phpunit.xml: the operator's real
secret was reaching the suite from .env and rejecting every unsigned test
payload, which is why 7 webhook tests failed before any of this.
Verified in the browser: with team traffic cut from 3000 to 500 GB in the
catalogue, the customer's portal still shows 3 TB.
373 tests green. Codex review clean after three rounds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Design is decided and Codex-reviewed; none of it is built. Records the live
split-brain bug to fix first, the three-table catalogue, computed availability,
the proof register with frozen add-ons, the Stripe split, what already exists,
and the working rules that cost time this session.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A cancelled subscription still reported an upgrade as allowed and priced it, so
a caller trusting that would have provisioned and billed a customer who had
already left. And any term string other than the two we support was silently
priced monthly while keeping the unknown value — a subscription whose price and
billing period disagree. Both are refused now.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Flooring the remaining time made an upgrade with under a day left cost nothing,
and an upgrade requested after the period had ended cost nothing while being
applied immediately — the bigger plan for free. Remaining time now rounds up
while any service is left, and an expired period defers the change to the next
term instead of pricing it at zero.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Once the term is over, the downgrade has to be allowed — otherwise the job that
is supposed to carry it out never can, and the change waits forever for a date
that has already passed.
And a grandfathered plan can be cheaper than the smaller plan costs today, which
made the goodwill credit negative: an invoice for the privilege of downgrading.
Clamped to zero.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
With grandfathered prices the comparison inverts: a business plan bought when
it cost less than today's team plan would have treated a move to team as an
upgrade — charged immediately, while the customer loses resources. The plan's
rank is frozen with the rest of the snapshot and decides the direction; prices
only decide the amount.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The plan catalogue describes what we sell today; a customer who signed up last
year bought last year's terms. Every commercially relevant condition — price,
quotas, seats, the hardware behind the plan — is now frozen onto a subscription
at signup, and the model refuses to let any of it be rewritten afterwards. A
price rise applies to new subscriptions and cannot reach back into an existing
contract.
PlanChange holds the two rules, computed against the frozen price rather than
today's catalogue:
- Upgrading is immediate and pro rata: the new plan for the days left in the
paid term, minus what the old plan was worth over those same days. On the
last day of a month that is one day's difference, not a month's.
- Downgrading waits for the end of the term. A yearly customer bought a year
and can move down when it is up; a month is a month. A mid-term downgrade is
a goodwill decision, not a self-service button, and its credit covers only
the unused part of the difference.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A verifier that returns the number in display form ("DE 811 907 980") would
have failed the comparison against the normalised current value and silently
switched a genuine reverse-charge customer back to domestic VAT. Both sides are
normalised now, and vat_id_verified_at is a real datetime rather than a string.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A timestamp alone said "some number was checked once": editing the field left
it intact, so a customer could swap a verified foreign VAT ID for any
plausible-looking one and keep zero-VAT pricing. The verified value is stored
and compared, which makes the rule self-enforcing — no writer has to remember
to clear a flag, and there are several writers.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Any non-empty string starting with two characters other than AT switched the
customer to reverse charge — typing "XX123" was a 20 % discount. Reverse charge
now requires a VAT ID that is verified, belongs to an EU member state other than
ours, and looks like a VAT number at all. Unverified is the normal state and
means the domestic rate: over-collecting is correctable, under-collecting is a
tax liability.
Changing the number clears its verification. Verification itself (VIES) is not
built yet, so reverse charge stays off until someone confirms a number — which
is the safe direction to be wrong in.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Codex was right that this could misstate real charges: an EU business with a
VAT ID registered in another country is billed under reverse charge, and we
were adding 20 % Austrian VAT to their total anyway. TaxTreatment resolves it
from the customer's VAT ID, and the whole page — cart, plan cards, add-on
cards — now states one treatment instead of contradicting itself.
Explicitly NOT handled: cross-border sales to private individuals, which are
taxed at the buyer's national rate under OSS. That needs a maintained rate
table and a tax adviser, not a guess, so those fall back to the domestic rate —
over-collecting rather than under-collecting.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The note rounded VAT after aggregating while the total rounded per order, so
cent-level prices made the two disagree — and a customer who spots that stops
trusting every other number on the page.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Both requests could finish their delete before either inserted, leaving exactly
the two pending upgrades the rule exists to prevent. Replacement and insert now
run in one transaction with the customer row locked.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two contradicting plan upgrades sat in the cart at 799 and 399 € — no checkout
could resolve which one the customer meant. Choosing another now replaces the
pending one and says so; add-ons still stack, because buying 200 GB as two packs
is a sensible thing to want.
Every price now states net or gross and how often. The cart shows net per line
with "pro Monat" or "einmalig", then subtotal, VAT and gross — and separates
the monthly recurring amount from a one-off traffic top-up sharing the same
cart, because those are two different commitments. The rate is configurable
(CLUPILOT_TAX_PERCENT, 20 % default) since it follows the seller's country.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The handoff stayed in the cache for its full ten minutes, so any replayed
component request could fetch the plaintext again — "shown once" was a figure
of speech. It is consumed on the first read and the token dropped; the payload
reaches the view and nothing else.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two from Codex:
- The job accepted any stored instance with a host. A closed one's VMID can have
been reused on the same machine, and the reset would then land on another
customer's VM. It now requires a live instance, and the action is not offered
for anything else.
- An unreachable Proxmox or guest agent throws rather than returning an exit
code, so nothing was ever written to the handoff and the modal polled forever.
The throw is caught, and a failed() handler covers anything that still escapes.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Impersonation borrows the customer's portal session; this is access to their
installation, which is a different thing and now a different button.
Nextcloud has no passwordless admin jump, so this does the only honest thing it
offers: it resets OUR managed admin account inside that installation and hands
the credentials over once. The customer's own accounts are untouched, and the
next request sets a new password again.
- New capability instances.adminlogin, Owner and Admin only — stronger than
impersonation, because it hands over control rather than a session.
- The operator's own password is required every time, rate-limited: taking over
a customer's installation is not something an unattended browser should manage
on its own.
- The reset runs on the provisioning worker (it owns the tunnel and the Proxmox
credentials); the console polls a handoff token, so the credentials never
enter a Livewire snapshot.
- A silent instance is reported as such instead of appearing to succeed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
"5 purchases pending" told nobody what they had ordered and offered no way to
change their mind. The billing page now lists each pending purchase by name,
what it costs, when it was added, and the total — with a remove button per row
behind a confirmation, like every other destructive action in the console.
The wording lives on the Order model rather than in the view, so the cart, the
invoice list and any later confirmation mail cannot each invent their own name
for the same row. Removal is scoped to the customer's own still-pending orders,
checked in the modal itself: modals are reachable without the page's guards.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Jobs that pin themselves to the provisioning connection bypass
QUEUE_CONNECTION, so two tests opened a Redis connection — fine on a machine
running the stack, a RedisException in CI. A test run must not depend on
infrastructure being up.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The dist path is rate-limited for anonymous callers, and a partial failure left
a half-installed vendor/ behind — the suite then failed with 500s that had
nothing to do with the code. Source clones need no quota. A GitHub token would
let us go back to the faster path.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CI has no build, so every page rendering through @vite threw a view exception —
dozens of failures with one cause. withoutVite() makes the suite test the
application rather than the state of the asset pipeline; a broken build shows up
in the build job, which is where it belongs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
CI caught it: both rendered through @vite, so a missing manifest threw a view
exception instead of a page. That is not a test problem — the update page is
shown precisely while the application is mid-deploy or freshly installed, which
is exactly when the manifest may be absent. Both carry their own small
stylesheet now and render with nothing built at all.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
actions/cache expects a cache service the runner matching Gitea 1.20 does not
speak, and it failed the job outright. It was an optimisation; the source
fallback that makes the install work is what mattered.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Composer's dist downloads come from GitHub, which throttles anonymous callers —
on a shared address that is a coin flip, and it took the run down after four
minutes of setup. Source clones are the fallback, and both toolchains now cache
their package directories so a repeat run barely touches the network.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The floating tags moved to node24; act_runner 0.2.6 — the version that matches
Gitea 1.20 — supports node20 at most, so every job died before running a single
test. Pinned to the newest releases that still declare node20.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Once a key is free, someone can legitimately create a new access with it. The
forced revocation looked the key up and would have deleted that person's access
and pulled their key off the hub. It now acts only on an adoption artifact — a
system peer with no owner and no creator — and leaves anything else alone.
Re-issuing also threw when VPN_CONFIG_KEY was missing, which is exactly the
situation the console tells people to fix by re-issuing. It now hands the new
config over once instead of storing it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Codex found that a sync landing between the key swap and its removal would see
the old key as unknown. Writing the test showed something worse than the
duplicate he predicted: the adoption cannot even happen — the address still
belongs to the live access — so the insert violated the unique index and took
the ENTIRE reconciliation down with it. One stale key would have stopped every
peer's state from updating.
The sync now recognises that case and queues the removal instead of adopting,
and a key with no row of its own is revoked with force: it can only ever be
removed, never kept, so the removal cannot be talked out of it by a row that
should not exist.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
An access created without storing its config had no download button and no
explanation — it looked broken. It now shows a dimmed button that says why
(the private key only exists on your device), and every staff access gets
"Re-issue": a new keypair, old key off the hub before the new one goes on,
so two peers never claim the same tunnel address at once. A stored config is
re-encrypted in step, or the owner would download a key the hub no longer
accepts.
Host peers are excluded: their key belongs to the machine's own wg0, and
swapping it here would cut the host off with nothing left to repair it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
github.* is the documented context alias and exists in 1.20; gitea.* came
later. The runner is pinned instead of :latest — the registration protocol
moves with the server, and a newer runner refuses to register against an older
Gitea.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three things that bit us on every deploy:
- artisan down now renders a branded page that says an update is running and
reloads itself, instead of Laravel's bare 503.
- A page left open across a deploy carries a Livewire snapshot and CSRF token
the new code rejects — the user got "419 Page Expired" and a dead interface.
A 419 from a /livewire/ request now reloads the page; the session is still
valid, so that is all it takes. Hooked at the fetch layer rather than through
Livewire's request hook, whose failure callback is not invoked for this case
in the installed version — verified against a real 419 in the browser, not a
simulated one.
- Vite no longer empties its output directory: wiping it is what left an open
page without its stylesheet mid-deploy, which is the "design is completely
broken" symptom. update.sh also rebuilds the caches with optimize:clear +
optimize instead of leaving them half-warm.
Plus CI: .gitea/workflows/tests.yml (Pest + asset build, and a tested- tag only
on a green main) and an opt-in act_runner service under the ci profile.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
--env-file makes the whole run non-interactive, which is what a bare server
needs: install git, clone, run, done. The file also carries the operational
secrets (Hetzner DNS, Stripe, SMTP, the Proxmox key path); those are optional,
so a first install can happen before the Stripe account exists and the features
stay dark until the values are filled in.
The installer warns when the file is readable by more than its owner, and
clupilot.env is gitignored — it holds every secret an installation will need.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The banners sat outside the h-screen shell, so the page scrolled and the content
scrolled — two scrollbars whenever a maintenance window was active.
Maintenance notices are now a bell with a count in the header, next to the user
menu that was otherwise the only thing up there. Impersonation stays visible as
a header chip rather than moving into the dropdown: it is a mode, not a notice,
and acting as someone else without noticing is how mistakes happen.
Also: the VPN status pill wrapped onto two lines in a narrow column.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A registration finishing while the purge waited on the run locks wrote
dns_record_id after the purge had already loaded the host, so it skipped the
deletion and then deleted the row holding the only id.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The failure may be a lost response to a request that did create the record.
Advancing straight away stored no id, so PurgeHost could never remove it and the
host's management address stayed published. The upsert is idempotent, so a retry
recovers the id; only after the attempts run out does the onboarding continue
without a name.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two legacy codes can normalise to the same label (eu_west and eu-west), and
separate counters then handed both of them eu-west-01 — a unique-constraint
failure inside the reservation, which blocks onboarding rather than being a DNS
problem the step can shrug off. Lock, counter and the in-use check all key off
the label now.
(The helper was also called label(), which HostStep already declares as the
step's display name — renamed.)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
alpha_dash accepted eu_west, -edge and edge-, none of which are valid DNS
labels — every host in such a datacenter would have failed registration and,
because DNS is non-fatal, silently ended up without a name. The console now
requires a proper label, and the step normalises anything created before that
rule so existing rows still get a usable name.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A lost response, or a retry after a later step failed, made every further
attempt a 404 — and the host impossible to purge.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Swallowing it and carrying on deleted the row that held the only reference to
that record, publishing the machine's management address for good. The purge now
fails instead — and is retried, since it re-reads the host and its other steps
are idempotent — so a broken DNS provider becomes a visible failed job rather
than a silent leak.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Codex was right that my never-reuse claim did not hold:
- The lock was released with only a candidate in hand, so two concurrent
onboardings in one datacenter could pick the same name and overwrite each
other's record. The name is now persisted on the host while still locked.
- The number was derived from the hosts that happen to exist, so removing the
highest one handed that number straight back out — a cached name would then
resolve to a different machine. The counter is stored per datacenter, floored
by what is actually in use so a wiped settings store cannot reissue live names.
- PurgeHost deleted the row that carried the record id, leaving the machine's
management address published with nothing left to clean it up.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
fsn-01.node.clupilot.com, numbered per datacenter and never reused — removing a
host must not renumber its neighbours onto its name, so the number is stored
rather than derived.
The record points at the host's WireGuard address, not its public IP: the name
exists so an operator can reach a host by name over the VPN, and publishing a
Proxmox host's public address would hand every scanner a target, which is the
one thing this network design avoids.
DNS is convenience, not a prerequisite: a failure logs an event and lets the
onboarding finish rather than stranding a host that is otherwise ready.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Defaulting missing netin/netout to zero reset the baseline, so the next real
sample added the entire cumulative counter again — a customer throttled for
traffic that was counted twice. Such a sample is skipped and logged now.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- update.sh restarted the long-lived services before clearing the caches, so
they booted from the old cached config and kept it for the life of the
process — the release's configuration never reached the workers.
- install.sh put the Gitea token in the clone URL, which is visible in the
process list to every local user while the clone runs. It goes through a
short-lived askpass helper now.
- The collector's uniqueness lock expired at exactly the collection interval,
so a delayed queue could run two collectors on the same baseline and count
the same delta twice — throttling a customer for traffic they never used.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Tying the release to the creation of the new month's row meant a single failed
call was never retried: the row exists from then on, and the current period
looks unthrottled, so nothing could detect the stale NIC limit. A customer would
have stayed slow for a whole month they had paid for. Checked on every sample
now, with a test that makes the first release fail.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- The provisioning worker boots before install.sh writes
CLUPILOT_WG_HUB_PUBKEY and holds the empty value for the life of its process,
so every host onboarded afterwards would have got an empty PublicKey in its
wg0.conf.
- A failed update left the checkout at the target, so the rerun compared a
commit with itself and skipped exactly the dependency and image steps that had
not finished. The comparison base is now the last commit actually deployed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two from Codex:
- A throttled instance kept its NIC limit into the new month: the new period
row starts unthrottled, so neither branch of enforce() fired and nothing ever
took the limit off. A customer would have stayed slow through a month they
had already paid for.
- PublicSiteGate exempted livewire/* wholesale. That endpoint is shared by the
console and the portal, so a signed-in customer could keep driving portal
components — billing included — while the portal was supposed to be offline.
Operators pass the normal check anyway, which is all the console needed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Customers can now see what they have used and what is left, and the service
slows down rather than stopping when the allowance is gone — a slow Nextcloud
gets a top-up, a dead one gets a cancellation.
- instance_traffic keeps one row per instance per month. Proxmox counters are
cumulative since the VM last started, so usage is the difference between two
samples, and a counter that went backwards means a restart, not a refund.
- Outbound is what counts: inbound is free at our providers and egress is what
Hetzner's 20 TB per server applies to.
- CollectInstanceTraffic samples every 15 minutes, warns once per threshold
(80/95 %) rather than on every run, and at 100 % limits the VM's NIC via
Proxmox — released again as soon as the customer tops up or the month rolls
over.
- The dashboard gets a full-width band (it throttles the service, so it is not
a tile among tiles) with the top-up offer right next to the warning.
- Bytes are formatted in SI units now: allowances are computed in SI, so
dividing by 1024 made a 1000 GB plan read as "931 GB".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The installer still needs root for apt and the firewall, but it now creates a
clupilot service account that owns the checkout and runs Docker, maps the
container user to it (HOST_UID/GID), and update.sh refuses to run as root —
root-owned files in the checkout are files the application cannot write.
The account has no password login: docker group membership is root-equivalent
on the host, so it is reachable only via sudo -u or an SSH key.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- update.sh recreated the app container only at the very end, so an update that
changes the PHP runtime would have installed dependencies and migrated inside
the old one.
- install.sh randomised DB_PASSWORD but left DB_ROOT_PASSWORD at the value
committed in .env.example — the same root credential on every installation,
reachable from any container on the compose network.
- Settings cached the fallback after a database failure, so one blip could
leave a hidden site publicly visible until someone cleared the cache. Only a
successful read is cached now, proven by a test that drops the table and
brings it back.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Codex was right on all three, and the first was a design error on my part: the
checkout is bind-mounted into every container, so 'git merge' swaps the running
code instantly — 'migrations before traffic' was not achievable by ordering.
The updater now goes down → merge → dependencies → migrate → assets → restart →
up, trading a short deliberate outage for never serving code whose schema does
not exist yet. If a step fails the site STAYS down: coming back up with new code
on an old schema is worse than staying dark until someone looks.
It also records the last successfully deployed commit. A run that died halfway
left the checkout ahead, so the next run said 'already up to date' and skipped
the rest forever.
And it installs dependencies when a lockfile moved: vendor/ and node_modules/
live in the bind mount and shadow the image, so rebuilding the image never
updated them — migrations could run against stale packages.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
install.sh sets up a bare Debian/Ubuntu server end to end: Docker, git,
WireGuard, clone, generated secrets, stack, migrations, hub keypair, the Owner
account and a closed firewall. Re-runnable: it keeps an existing .env and never
regenerates the hub key, which would disconnect every onboarded host.
update.sh pulls and applies. Migrations run before the new containers take
traffic, the image is rebuilt only when its definition changed, and the queue
workers are restarted — they are long-running processes that otherwise keep the
old classes in memory, which cost us an hour during development.
clupilot:create-admin creates or promotes an Owner, so re-running the installer
fixes a lost role instead of failing on a taken address.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
While the product is still being built, the marketing site and the customer
portal should not be reachable — but they must stay reachable for us.
- A toggle in the console (site.manage, Owner/Admin) stored in a new
app_settings table, because this has to be flippable without a deploy.
- Outsiders get a placeholder with 503 + noindex, not 200: a 200 invites search
engines to index the placeholder as the site's content, which is far harder
to undo than to prevent.
- Anyone on the management VPN, and any signed-in operator, sees the real site.
The console, Livewire's endpoint, the Stripe webhook and the health check are
always reachable — otherwise the switch could only be flipped once.
- robots.txt is generated by the app and follows the switch. It had to stop
being a static file: nginx short-circuited it and Laravel's stock file said
'Disallow:' with an empty value, so crawlers were never told anything.
- Settings reads fall back to the default when the table is unavailable. The
gate reads one on every request, so a deploy running new code before migrate
would otherwise answer the entire site with a 500.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The action labels wrapped to two lines and crushed the column — now icon
buttons with tooltips, like every other admin table. The form column was too
narrow for its content: the datetime fields silently clipped their own value,
so they are stacked and full width now, with duration chips because typing an
end timestamp by hand is the fiddliest part of the form. Host rows show a real
selected state and a per-datacenter count, and the impact column says
"1 Host · 1 Kunde" instead of "Host(s) · Kunde(n)".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Encryption and the write ran after the transaction had committed and the peer
had been dispatched to the hub. A failure there left a live access whose config
was never stored — unrecoverable, and the operator would create a second one
not knowing why. Both now happen in the same insert; nothing is dispatched
unless it succeeded.
Re-verified in the browser afterwards: create with storage, wrong password
refused, right password reveals the config.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Ownership alone kept download, block and delete reachable for someone whose
roles were removed by any path other than revokeStaff() — a direct role edit,
say. Being staff is now part of ownership, so revocation closes these doors
without depending on whoever removed the role also remembering the tunnel.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The download counter was read-modify-written, so two concurrent retrievals
recorded one. It is an audit trail — under-reporting is the failure mode it
must not have.
The creation-race test broke when issuing moved into a transaction: its
simulated competitor writes inside our transaction, so the rollback removes
that row too. It now asserts what actually matters (the loser is told, and
creates nothing) and states what a single-connection sqlite test cannot show.
This test was red in the previous commit — my mistake for committing before
reading the run.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A revocation committing between the operator check and the insert would find no
peer to remove and still leave the revoked colleague with a brand-new tunnel.
Issuing now runs in a transaction that locks the owner row — the same row
revokeStaff() locks — so the two cannot interleave.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every five-second poll re-rendered the page, putting the private key into
another HTTP response — the handoff kept it out of the snapshot but not out of
the responses. Traffic figures can wait the minute it takes to copy a key.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Creating a second access with a supplied key skipped the config branch, so the
first access's private configuration stayed on screen under the new name — and
someone would have handed it out.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two modules is below the minimum, and against a bordered card some readers fail
to locate the symbol at all.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Once revealed, the plaintext sits in the handoff cache for ten minutes, and the
modal read it from the token alone. A former owner could keep pulling the key
out of an open modal after revocation — the exact window purgeSecret() exists to
close. Every request now re-checks the policy and drops the handoff when it no
longer holds.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The sidebar still gated the VPN entry on vpn.manage, which the split deleted —
so the page would have vanished from the console for every role, Owner
included. Every operator can hold their own access, so the entry is shown to
all of them and the page itself shows only what the policy allows. Guarded by a
test across all five roles, which is the assertion my rewrite had dropped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A worker could pick the job up mid-transaction, still see the peer as active,
leave it on the hub — and never be asked again, because the committed state is
only a soft delete. A revoked colleague would keep their tunnel until some
later reconciliation noticed.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Codex spotted the migration labelling sync-adopted peers as staff with no
owner, which breaks the invariant the same migration introduces. The live sync
had the identical hole — it never set kind at all, so every adopted peer landed
on the 'staff' default. Both now use system for a peer nobody is behind, and
promote it to host once the link is known.
.env.example carried ADMIN_HOSTS twice; phpdotenv keeps the first, so a fresh
checkout would have got the list without localhost and 404'd its own console.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reworked after a design consultation with Codex, which pushed back on my first
proposal in three useful ways.
Ownership and rights:
- vpn.manage split into vpn.view.all and vpn.manage.all. Seeing an access is
not managing it, and neither is holding its private key.
- Record-level rules live in VpnPeerPolicy, not in permissions: an access
belongs to a person, and ownership is what grants sight of it. Every operator
reaches the page, but sees only their own unless they may see all.
- Issuing an access is not self-service — it reaches the management network, so
it needs vpn.manage.all even for oneself.
- New Developer role: sees everything, manages nothing. Writing code does not
imply authority over other people's access.
- kind (staff|host|system) replaces a null user_id that had to mean two
different things at once.
Config storage, opt-in per access:
- Downloading is owner-only — explicitly NOT for view.all or manage.all. An
admin who needs access revokes this one and issues their own, which keeps the
record of who holds what honest.
- The password is asked on EVERY retrieval, rate-limited. Laravel's
password.confirm keeps a 15-minute session stamp, which would authorise
unlimited later downloads from an unattended browser.
- Stored under VPN_CONFIG_KEY, not APP_KEY: a leaked application key must not
also hand over the management network. Purged on revocation and when a staff
member is revoked — console taken away, tunnel left open was the worst case.
- The plaintext never enters a Livewire snapshot (the page polls every five
seconds); the component carries an opaque handle instead.
Also: copy button works without HTTPS again (navigator.clipboard only exists in
a secure context, so over http it silently did nothing), plus config download
as a file and a QR code for the mobile apps.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The FK only nulled host_id, so the adopted peer stayed enabled-but-absent: shown
as "wird angewendet" forever, and re-enabling it would have put the deleted
host's key and address back on the hub. PurgeHost now tombstones that row, which
hands it to the same revocation machinery as everything else.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- A host's wg_pubkey may not be in vpn_peers yet, so the duplicate check passed
and an operator could create an access with it. ApplyVpnPeer would then run
wg set with a freshly allocated address, rewriting that host's allowed-ip and
cutting CluPilot's management tunnel to a live machine. Creation now rejects
keys already held by a host, checked under the allocation lock.
- A sync landing between addPeer() and the step storing wg_pubkey adopted the
peer as "unknown", and a later sync filled in host_id but left the name, so
the page showed that host as unknown forever. The name is now filled in when
the link becomes known — only for sync-adopted rows, so an access an operator
named keeps its name.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureWireguard and RemoveWireguardPeer mutate the hub too, and were not
taking the lock, so a sync could still read the interface around them and
write stale state. Both now hold wireguard:hub, which is what makes the
read/mutation guarantee actually hold.
- The duplicate-key check ran before the allocation lock, so two concurrent
creations with the same key both passed it and the loser hit the unique index
as an unhandled 500. The check moved inside the lock, with the index kept as
a caught backstop for any writer that does not take it — reproduced in a test
by inserting a colliding row from within the allocation call.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A sync could read the hub snapshot just before ApplyVpnPeer removed a peer and
purged its tombstone, then adopt what it had seen as a fresh enabled access —
restoring a revoked one. Both jobs now hold Cache::lock('wireguard:hub') around
read-decide-mutate, so a reconciliation can never straddle a removal. Retry
removals are dispatched after the lock is released, because the sync queue
driver runs them inline and they take the same lock.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
If an add job was retried after the access had been revoked and its tombstone
purged, it found no row and trusted its own enabled=true payload — re-adding a
key that no longer had a row anyone could revoke it with. A missing row can only
mean the access is gone, so the captured payload may now remove but never
enable.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two more from Codex:
- Addresses come from one subnet but live in two tables (hosts.wg_ip and
vpn_peers.allowed_ip), so a concurrent host onboarding and console creation
could each see the same address as free and both insert — neither unique
index sees the other. Creation now waits on Cache::lock('wireguard:allocate'),
the same lock ConfigureWireguard already holds while reserving a host address.
- mount() runs once, so revoking vpn.manage left an open tab polling every five
seconds and still receiving fresh peer state. Authorization now also runs on
hydration, which is what the poll goes through.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
With the Vite dev server off by default, a fresh checkout had no public/build
(gitignored, and the image does not build it), so every @vite page failed with
ViteManifestNotFoundException. The entrypoint now builds once when the manifest
is absent, non-fatally — a broken build must not wedge the container into a
restart loop where the logs are unreachable.
Proven by deleting public/build and restarting: assets rebuilt automatically,
page 200.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two lifecycle holes Codex found in the new VPN management:
1. Delete removed the row before the hub knew. If the removal job was delayed
or failed, SyncVpnPeers saw a peer it did not recognise and adopted it back
as a live access — silently restoring what an operator had just revoked, and
with no row left to revoke it again. Deletion is now a soft-delete
tombstone: the row survives until the hub confirms the peer is gone, the
sync retries the removal instead of adopting, and the tombstone is purged
only once the peer is really absent. It also keeps the key and the tunnel
address reserved meanwhile, so neither is handed out twice.
2. ApplyVpnPeer applied the state captured at dispatch. A retried block job
could therefore undo a later unblock, and nothing would repair it — the sync
only observes state, it never re-applies intent. The job now resolves the
current desired state from the row and treats its payload as a fallback for
the case where the row is already gone.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The console can now create, block and remove VPN accesses, and shows who is
actually connected — traffic counters, source endpoint and last handshake.
Design notes:
- The web container has no wg0, so the page never talks to WireGuard. Live
state is copied in by SyncVpnPeers on the provisioning queue (the only worker
whose container owns the interface); the page polls the database and merely
nudges that job, throttled so many open tabs cannot flood the queue.
- enabled (operator intent) and present (observed on the hub) are stored
separately, so a sync can never quietly undo a block and drift stays visible
as "wird angewendet".
- The sync adopts peers the host pipeline registered, naming them after their
host — otherwise "who is on the VPN" would have blind spots.
- Keypairs are generated in PHP via libsodium rather than shelling out to
wg genkey (no interface in this container, and it keeps generation testable).
The private key is shown once and never stored.
- allocateIp() now also considers vpn_peers, which would otherwise be handed a
tunnel address a host already holds.
- vpn.manage is a new capability held by Owner/Admin only, and it hides the nav
entry too — a VPN access reaches the management network.
Verified end to end against the real hub, not just mocks: created an access in
the browser, connected with the generated config, watched the console flip to
"Verbunden" with real counters, then blocked it and confirmed the peer was
gone from wg0 and the client could no longer handshake.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Setting the real APP_URL made route() build https://app.dev.clupilot.com/...,
which ADMIN_HOSTS does not list, so 30 admin tests 404'd. The suite must not
depend on operator hostnames.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The cancel buttons were dead: wire-elements registers Livewire.on('closeModal'),
but the buttons used Alpine's $dispatch, which fires a DOM event. Livewire
bridges its own events TO the DOM, not back, so nothing ever received them.
Proven in the browser both ways — before: modal stays open after Abbrechen;
after: it closes.
Domain operation behind Zoraxy:
- trustProxies for FOR/PORT/PROTO so Laravel sees https (otherwise it builds
http:// URLs into an https page). X_FORWARDED_HOST is deliberately NOT
trusted — the console is gated on the request host, and trusting it would let
anyone reach /admin through a public domain by forging the header.
- APP_URL + VITE_REVERB_* point at the dev domains (wss via ws.dev).
- Vite dev server is now opt-in (VITE_AUTOSTART): over https the browser cannot
load assets from http://<ip>:5173. Built assets are the default, and the
entrypoint clears a stale public/hot, which otherwise 404s every asset.
Verified in the browser over https: login, styled pages, zero console errors,
zero unencrypted requests, /admin reachable only on admin.dev.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The hub lives in queue-provisioning (the only worker on the provisioning queue,
and LocalWireguardHub shells out to wg in-process). Generated the hub keypair,
wrote wg0.conf, and filled CLUPILOT_WG_ENDPOINT/HUB_PUBKEY.
Verified against the running stack rather than mocks: registered a stand-in
Proxmox peer through the app's own addPeer(), got a handshake, opened hub->peer
TCP over the tunnel (what the SSH steps actually need — a handshake alone does
not prove routed TCP), confirmed wg-quick save persisted the peer, then removed
it through removePeer(). wg0 returns after a container restart.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Only the marketing site and the customer portal are public; /admin and the
Proxmox hosts stay on the private network. nginx was a single server_name _
catch-all, so /admin was served on all four dev domains.
Two layers:
- nginx denies /admin on the known-public hostnames before PHP is reached
(denylist, so an allowlist typo cannot lock the operators out).
- ADMIN_HOSTS is now populated, making the app layer a strict allowlist that
also covers /livewire/update, which nginx cannot attribute to /admin.
Verified live against the running stack: /admin is 404 on www/app/api/ws and on
any unlisted host, 302->login on admin.dev / the private IP / localhost, while
/ and /dashboard stay reachable everywhere.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
DNS names are case-insensitive and Symfony's getHost() always returns lowercase,
so ADMIN_HOSTS=Admin.Example.com rejected every request and locked operators
out. Normalised in the config AND at the comparison, so the value is safe
whichever route it took in (env, cached config, runtime set).
operator()/admin() moved from RbacTest/HostManagementTest to tests/Pest.php:
they were only loaded when those files happened to be in the run, so a targeted
single-file run died on 'undefined function operator()'.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Admin actions post to /livewire/update, which a path-scoped guard skips — an
operator session could drive admin components through a PUBLIC hostname despite
ADMIN_HOSTS. The restriction is now registered as Livewire-persistent middleware
and listed on the admin route group, so Livewire re-applies it from the
component snapshot.
Proven by replaying a snapshot taken from the real rendered page: identical
payload -> 404 on a public host, 200 on the allowed host (positive control, so
the test cannot pass for the wrong reason).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Proxmox fleet and the operator console must never be publicly reachable. The
primary control is the reverse proxy, but nginx here is a catch-all
(server_name _), so /admin was served on EVERY hostname — a proxy
misconfiguration would expose it. ADMIN_HOSTS pins it; any other host gets 404
(not 403: a public domain must not disclose that a console exists).
Prepended to the group instead of the admin route group on purpose: route
middleware is reordered by Laravel's priority list, which runs first — a
guest would then be redirected to /login and learn the console is there. Covered
by a test for exactly that case. Empty ADMIN_HOSTS = unrestricted, so nobody is
locked out by upgrading.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- MONITORING_ATTEMPTS is capped by the run's max_attempts, so a large value can
no longer burn the retry budget and fail the very provisioning the degradation
exists to protect (covered by a new test at the budget boundary)
- /health is now dependency-free (200 in ~2ms with Kuma absent, verified: the
container healthcheck stays healthy); Kuma state is exclusively in /ready
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Verified with a reachable Kuma and deliberately wrong credentials:
/ready -> 503 'Kuma login rejected: Incorrect username or password.'
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Verified against a real Kuma by stopping it mid-test:
- get_monitors() reads the library's CACHED monitorList event, so it reported
'up' long after Kuma died. Reachability now does a real HTTP round-trip plus a
live socket check.
- the cached list could yield an id for a monitor that no longer exists; a match
is now confirmed with a live get_monitor before it is returned, so CluPilot can
never record a target that is never checked.
- liveness (/health, always 200 while serving) split from readiness (/ready, 503
when Kuma is unreachable) — the container healthcheck must not restart a
healthy bridge just because a dependency is down.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- attempt is 0-based, so compare one-based: ATTEMPTS=2 really means two tries
- bridge accepts add_monitor returning {monitorID}|{id}|int (v1.2.1 returns a
dict — re-verified: first create on a fresh Kuma is HTTP 200 with the id)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Kuma has no write REST API (monitor CRUD is Socket.IO only), so docker/kuma-bridge
translates the exact generic REST contract HttpMonitoringClient already speaks —
no PHP client change needed. Opt-in compose profile 'monitoring'.
Verified end-to-end against a real Uptime Kuma 1.x:
create -> id, create again -> same id (idempotent), list, status, delete
and PHP MonitoringClient -> bridge -> Kuma round-trip.
The e2e run caught a real bug: add_monitor takes 'maxretries', not 'retries'.
Monitoring is now observability, not a delivery gate:
- RegisterMonitoring retries MONITORING_ATTEMPTS times on an outage, then
continues degraded with a visible 'info' event
- RunAcceptanceChecks no longer fails when monitoring isn't green (a fresh Kuma
monitor legitimately reports 'pending' — confirmed in the e2e run); it records
the gap instead. MONITORING_REQUIRED=true restores strict gating.
- docs/monitoring-uptime-kuma.md documents setup, failure behaviour, alternatives
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- .env.example gains a full, commented CluPilot operations block (Stripe, Hetzner
DNS, Traefik, WireGuard hub, SSH identity, monitoring, prod mail) with a note
that everything is optional for local dev
- config/provisioning.php: CLUPILOT_SSH_{PUBLIC,PRIVATE}_KEY_PATH read the key
from a file (a multi-line PEM cannot live in .env), falling back to inline vars
- documents that Uptime Kuma's REST API is read-only (monitor CRUD is Socket.IO),
so it needs a bridge rather than being drop-in for the generic REST client
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ResolvesCustomer trait replaces 5 duplicated customer() lookups; portal actions
now SAY why nothing happened (operator accounts have no Customer) instead of
returning silently — the actual cause of 'dead buttons', '0/0 seats' and
'settings not saving' when signed in as admin
- portal layout: explicit notice for a login without a linked customer
- /cloud: per-instance maintenance badge + window details; seat note 'owner = seat 1'
- maintenance form: sectioned card, hints, placeholder, styled datetime fields,
grouped host picker with per-datacenter select-all + selection counter
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- isOperator()/EnsureAdmin/broadcast fall back to is_admin so a legacy admin is
never locked out by a stale permission cache
- published modal: centered max-w-lg card (dynamic modalWidth class was purged
by Tailwind → full-width)
- datacenter edit moved to a modal (no row-height jump); location is now a
country dropdown (config/countries.php) instead of free text
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- 5 operator roles (Owner/Admin/Support/Billing/Read-only) seeded via migration
with a capability catalogue; app checks capabilities via Gate, never role names
- every mutating admin action authorizes server-side (hosts/datacenters/customers/
impersonate/provisioning); is_admin reads migrated to console.view / isOperator()
- admin /settings: own account + Owner-only staff invite/role/revoke with
last-owner, self-role and customer-collision guards (transactional)
- sidebar 'zum Kundenportal' link replaced with Settings
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The DB now refuses to orphan a host; datacenter delete pre-checks for a friendly
message and catches the constraint as the race backstop.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- seat limit follows the active/cancelling package, not a newer inactive record
- suspend/reactivate toggle refuses closed accounts (terminal); closed shown in list
- factory emails use a large unique numeric space (safeEmail pool could collide
late in a full suite run)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- seats table + model; Users page manages team members (owner auto-created)
- invite respects plan seat allowance + dedupe; role change + revoke guarded
so the last owner can never be removed or demoted
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- customers gain profile + branding + closed_at; instances gain cancellation
fields; branding resolver (NULL -> CluPilot defaults) snapshotted into the
provisioning run context
- cancel package: term-end, irreversible, typed-confirm modal (R5)
- close account: guarded (no active package), typed-confirm modal (R5)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- plans gain seats + performance class; customer views show storage/seats/
performance/features, no raw vCPU/RAM (admin keeps specs)
- billing: scoped wire:target + wire:key so one purchase no longer spins all
- chart island: line-colour->transparent gradient for filled line datasets;
MRR / backups / invoices bar charts converted to gradient line
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- customers.user_id unique so impersonation/billing can't cross customers
- HostCreate validates datacenter is active (exists rule + active=1)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- migration seeds fsn/hel + any host-referenced code so existing installs
keep selectable datacenters after upgrade
- Billing::customer() resolves via user_id, email only as legacy fallback
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Progress bar + X/total, highlighted current step, faint next step, failure
inline — replaces the long repetitive per-step 'done' list. Tactical-Terminal
tokens, DE+EN.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
App-shell layout: sidebar is a full-height fixed column on lg, only main
scrolls. Re-added the left->right shimmer sweep on the dashboard storage
banner (reduced-motion safe, token colours).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
datacenters table/model + admin CRUD (/admin/datacenters, nav). HostCreate
picks from active datacenters (validated); hosts show the datacenter code.
Seeded fsn/hel. 5 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clone recovery: once the lock clears but the task ref is lost, destroy the
possibly-incomplete VM and re-clone instead of advancing onto it.
- applyFirewall clears existing rules before adding, so retries don't accumulate
duplicate Proxmox firewall entries.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Nextcloud: parse occ status JSON (installed + not in maintenance).
- Admin: query occ user:info for the account.
- Monitoring: MonitoringClient::isHealthy checks the provider, not the local row.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
TraefikWriter now targets the host that serves the traffic (DNS points at it):
SshTraefikWriter SSHes in and writes the file-provider YAML there. Interface
takes the traffic host + guest backend.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CompleteProvisioning scrubs admin_password whenever credentials_sent exists,
so a crash between recording and scrubbing can't leave the password in context.
- HttpMonitoringClient looks up an existing monitor by URL before creating one,
so a retry after a crashed POST doesn't create a duplicate external monitor.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clone recovery polls until the VM lock clears instead of advancing onto a
possibly-incomplete clone.
- RegisterBackup/RegisterMonitoring create the local row BEFORE the run-resource
breadcrumb, so a crash between them can't leave the row permanently missing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureCloudInit sets cores/memory from the plan (not the template default).
- RegisterBackup uses a deterministic Proxmox job id (ignore-exists) + firstOrCreate.
- RegisterMonitoring is idempotent by URL + firstOrCreate — no duplicate schedules
or monitors after a crash/retry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- applyFirewall sets policy_in=DROP so only 80/443 are exposed.
- Capacity/placement account for disk_gb (the real VM allocation), not the
smaller Nextcloud user quota — no systematic overcommit.
- CloudReady sent synchronously again; the step retries on mail failure with the
password preserved (no lost credential in a failed queue job).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CloudReady receives the ENCRYPTED password (decrypts only when rendering), so
the queued payload never holds plaintext.
- RegisterBackup uses a valid Proxmox calendar expression (02:00).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CreateCustomerAdmin puts OC_PASS on the docker invocation (survives the &&).
- RegisterBackup creates a real vzdump job via ProxmoxClient::createBackupJob.
- RegisterMonitoring registers via a new MonitoringClient service (interface +
fake + http). Both persist the external id [E] before the breadcrumb, so
acceptance reflects a real registration, not a fabricated row.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Accept checkout.session.async_payment_succeeded (async methods) and dedupe on
the checkout session id, not the event id.
- committedGb still counts a failed instance while its VM exists (has vmid);
releases quota only when no VM was created — no overcommit vs no leak.
- CloudReady is queued (durable). Credential delivery is documented at-least-once
(a rare duplicate welcome email beats a lost credential; exactly-once = v1.1 outbox).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Proxmox guest agent execs a program directly; our compound commands
(cd/&&/pipes/redirects/env) need an explicit shell.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Clone: recover via vmExists() when the task ref was lost, instead of
re-cloning the reserved vmid (which Proxmox rejects).
- Deploy: persist the DB password ENCRYPTED before compose up and reuse it on
retry, so a crash can't regenerate a mismatching credential.
- Complete: gate credential delivery on a credentials_sent breadcrumb so a
retry after a crash doesn't re-send the email.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Failed run releases the instance (status=failed) so its quota stops counting
against host capacity.
- CompleteProvisioning activates instance+order only AFTER onboarding tasks +
credential delivery succeed.
- ConfigureNetwork polls until the guest has an address (no wrong Traefik route).
- customers.email unique + race-safe customer resolution in the intake action.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
RunRunner::onPoll no longer resets started_at, so a poll step's own deadline
(WaitForGuestAgent 270s, ConfigureDnsAndTls cert 840s) actually fires instead
of resetting every poll. maxDuration raised above each own-deadline so the
step's fail wins over the generic timeout. Shared core fix (A + B).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Require a real customer email (no unknown@ fallback merging customers).
- Stripe signature: enforce 5-min replay tolerance + accept any rotating v1.
- DeployApplicationStack no longer persists the DB password in the run context.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Stripe webhook fails closed when the signing secret is missing (outside local/testing).
- ReserveResources places + creates the instance under a per-datacenter lock so
concurrent orders can't overcommit a host.
- CloneVirtualMachine reserves the vmid + breadcrumb BEFORE cloning, so a crash
can't mint a new vmid and orphan the first clone.
- CreateCustomerAdmin checks user existence and resets the password instead of
re-running user:add on retry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Stripe: only checkout.session.completed with payment_status=paid (dedupes the
paired payment_intent event and blocks unpaid async sessions).
- Capture the guest IP (ConfigureNetwork) and point Traefik at the VM, not the
Proxmox host, so ACME/HTTP-01 can reach Nextcloud.
- Resize the disk to an absolute target (not '+…') so a retry can't double it.
(Codex #4 timeout was a false positive — started_at resets per step.)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Admin /admin/provisioning bound to real runs+steps (poll+admin.runs). Embedded
CustomerProvisioning card shows the logged-in customer their own run live
(per-customer StepAdvanced channel, email-bridged authz). Shared BuildsRunSteps.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Signed webhook (HMAC verify when secret set), CSRF-exempt route. Paid checkout
creates customer+order+run (stripe_event_id unique => duplicate webhooks start
one run) and dispatches. 5 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Detailed build contract for Subsystem B (15 customer-provisioning steps),
written against the real Subsystem-A contracts: ProvisioningStep/StepResult
(advance/retry/poll/fail), RunResource idempotency breadcrumbs, ProvisioningRun
context, the config/provisioning.php pipeline registry, and the read-only
ProxmoxClient it must extend. Covers new models (customers/orders/instances/…),
ProxmoxClient VM-lifecycle additions, Hetzner-DNS + Traefik services, Stripe
idempotent intake, live progress binding to the existing admin/customer views,
build order and DoD. Unblocks B.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Prevents a second worker from consuming the follow-up job and bailing on the
still-held run lock, which would stall the run until the next scheduler tick.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Keeps the wg_peer resource gated on a verified handshake (idempotency) while
ensuring PurgeHost can always remove the hub peer, even on terminal failure.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- ConfigureWireguard checks setup command results and only records the wg_peer
resource after the handshake verifies, so a transient setup failure re-runs
the full setup instead of getting stuck on the idempotent path.
- Host removal now deactivates immediately and queues PurgeHost, which deletes
runs under the runner lock (waiting out a long step) — no 15s LockTimeout error.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- PhpseclibRemoteShell sets a command timeout (default 2000s) so apt
full-upgrade/install don't hit phpseclib's ~10s default and fail.
- Host removal dispatches RemoveWireguardPeer to the provisioning queue, which
runs in the worker that owns wg0 (the web container can't manage WireGuard).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Image installs wireguard-tools/iproute2; the provisioning worker brings up
wg0 before queue:work so LocalWireguardHub can manage peers.
- ConfirmRemoveHost deletes each run under its run:<uuid> lock so an in-flight
worker can't keep mutating the server or write to a deleted run.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- RunRunner catches step-resolution errors (removed/renamed pipeline) and
fails the run terminally instead of looping forever every tick.
- queue-provisioning worker gains NET_ADMIN + tun + persistent wireguard
volume + published UDP port so LocalWireguardHub can manage wg0.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Removing a host now removes its WireGuard hub peer so a freed wg_ip can't
route to the removed server via a stale peer.
- RebootIntoPveKernel clears reboot_issued/deadline when it times out, so the
manual retry action actually re-issues a reboot instead of failing instantly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
hub_ip is now defined in config (default: subnet .1), so a custom
CLUPILOT_WG_SUBNET no longer pings the wrong handshake target.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Dedicated 'provisioning' queue connection (retry_after 2400) + worker
(--timeout=2100); AdvanceRunJob tries=1, timeout=2100 on that queue.
- Run lock TTL raised to 2100s so a long step can't be run concurrently by a
duplicate tick-dispatched job.
- StartHostOnboarding creates host+run in a transaction, dispatches after commit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- RunRunner returns early for a waiting run whose next_attempt_at is in the
future, so stale/duplicate jobs can't bypass backoff.
- RegisterCapacity takes the largest VM-capable datastore instead of summing
overlapping pools (local + local-lvm), preventing placement overcommit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A retried step (manual or after a timeout) now gets a fresh started_at, so
RunRunner no longer immediately re-detects the timeout and burns the retry
budget without executing.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- StepResult::poll — polling steps (reboot) wait without consuming the retry
budget; the step owns its deadline. Reboot maxDuration > deadline.
- Failed runs move a Host subject to 'error' via ProvisioningSubject hook
(no host stuck 'onboarding').
- ConfigureWireguard allocates + reserves the wg_ip under a global lock;
unique index on hosts.wg_ip as a backstop against duplicate addresses.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- CreateAutomationToken now bootstraps the pveum role/user/token over the
authenticated SSH session (a fresh host has no API token yet); ProxmoxClient
is read-only in A.
- ConfigureWireguard re-verifies the handshake on the idempotent replay path,
never advancing over a dead tunnel.
- PhpseclibRemoteShell treats a missing SSH exit status as failure (255).
- connectWithKey verifies the pinned host key fingerprint on later logins.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Real hosts list, add-host form (StartHostOnboarding), host detail with live
progress stepper (Reverb + wire:poll fallback), retry failed run, remove via
wire-elements/modal (deregister only). DE+EN. 8 tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Focused TDD build plan for the engine: topology decision baked in (Option 1
standalone fleet as the software model, cluster-per-datacenter as the growth
target — hosts get datacenter + nullable cluster fields, placement filters by
datacenter). Covers data model, DB-state-machine orchestrator, 15 customer steps,
new ProxmoxClient, Stripe idempotent intake, and wiring the existing admin/customer
progress views to real data via Reverb. References the state handoff for workflow.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Full project state for a fresh session: env facts, stack, docker workflow, what's
built (landing + customer portal + admin console), verification workflow (pest /
R12 puppeteer / R15 codex), hard-won gotchas, open items, and the recommended next
block (provisioning engine v1.0).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Public www landing page (your design) as a self-contained Blade view at / — own
CSS/JS, system fonts (no CDN, R14), hero, marquee, typewriter, product mock with
scroll-zoom, security section, honest comparison, pricing gallery, FAQ, CTA. It is
intentionally outside the app token/component system (marketing page, not control
panel). Wired a sign-in link to route('login').
Robustness/a11y hardening from the Codex (R15) loop:
- reduced-motion: pin hero/reveal elements to their visible end state.
- <noscript> fallback so reveal content is visible without JS.
- login link kept visible on mobile (moved out of the hidden nav group).
- stats render their real values in HTML (correct without JS).
- footer legal links now resolve to real /legal/* routes (placeholder pages).
- reconciled contradictory data-migration pricing (add-on from €390).
48 Pest tests green; R12 browser: landing 0 console errors. Codex (R15) clean.
NOTE: the /legal/* pages (Impressum, Datenschutz, AGB) are placeholders — real
legal content must be supplied before this homepage goes public.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Separate admin console at /admin, gated to is_admin users (EnsureAdmin middleware
+ migration/seed; a plain customer user is seeded to prove the gate). Distinct dark
aesthetic achieved purely by token scoping: .theme-admin overrides every CSS design
token to a dark graphite / signal-orange palette, so ALL shared components (button,
card, badge, table, stat, chart) render dark with zero new markup (R3). Chart island
now reads tokens from its own element, so charts are theme-aware.
Sections (each full-page class-based Livewire, English routes R13, localized DE/EN):
- Overview: fleet KPIs, fleet-growth line, host-load bars, MRR bars, active runs, alerts.
- Customers: table + plan doughnut. Instances: fleet table (vmid/host/storage).
- Hosts: capacity cards (storage/CPU bars). Provisioning: runs table + live stepper.
- Revenue: MRR/ARR/ARPU/churn KPIs, MRR line, plan doughnut, recent payments.
- Locale-aware month labels/currency (Carbon/Number).
18 new Pest tests (guest redirect / non-admin 403 / admin render per section) → 44
green. R12 browser: all six admin pages HTTP 200, ZERO console errors (Chart.js dark).
Codex (R15) — clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Chart.js as an Alpine island (x-ui.chart): configs are PHP arrays; colours use
token: strings resolved from CSS design tokens at runtime (R3). Respects
reduced-motion; IBM Plex chart defaults.
- Tokens: soft --radius-xl (20px), --success-bright for dots/rings/charts.
Staggered 'rise' reveal keyframe. Global toast in the app shell.
- Overview rebuilt to the customer template: storage doughnut ring, availability
sparkline, KPI tiles, upsell, cloud card, interactive onboarding checklist
(Alpine), backups, modules (Lucide icons — no emoji, R9), activity feed.
- Locale-aware fixture display: Carbon isoFormat dates + Number::format sizes so
the EN dashboard is not mixed-language (R16).
- 14 Pest tests green; R12 browser: /dashboard 0 console errors with Chart.js;
R7 no overflow at 375/768/1280. Reviewed with Codex (R15) — clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
env_file: .env exported the dev DB/cache config as real container env vars,
which overrode phpunit's forced test env — so the Pest suite ran RefreshDatabase
against the dev MariaDB and wiped it on every run. Laravel already reads .env
from the bind mount; only vite needs VITE_HMR_HOST/VITE_PORT at process level,
now injected explicitly. Tests now use sqlite :memory: and never touch dev data.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
nexxo
Claude