Adds the dev-only Release page: a flag-gated route (config('clusev.release_controls'),
enforced by the component mount() guard) and a flag-gated sidebar item, plus the
Release Livewire component. Deploy-to-Staging is irreversible, so it goes through the
shared R5 wire-elements/modal confirm — confirmDeployStaging opens the modal and
applyDeployStaging consumes the sealed ConfirmToken and runs the deployStaging executor
(the host bridge writes the request, betaN is computed host-side). Registers the
releaseStaged confirm action in the ConfirmToken allow-list.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Default update source, README (badge/clone/home), the console + source-view
branding, and the CHANGELOG compare links now reference the public repo. Private
URLs remain only in the gitignored .env (install.sh derives CLUSEV_REPOSITORY
from the clone origin). Bump 0.9.58.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- A friendly HTML comment in the page source (both layouts, before <head>) —
ASCII "CLUSEV", what it is, and the project link — for anyone who View-Sources.
- A styled console banner printed on load (every page, incl. login): the CLUSEV
wordmark, a one-liner, the repo link, AND a self-XSS security warning. The
warning earns its place: a Linux-server control panel is a prime target for
"paste this into your console" social engineering, so the notice sits exactly
where that attack happens. console styling is best-effort and never throws.
Verified: /login 200, the console logs the brand + warning + link, the source
carries the comment, no page errors; 374 tests pass; Vite build clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- File manager: on tablet widths the lg table grid squeezed the name column
(minmax(0,1fr)) to near-zero behind the perms/size/modified columns + wide
action buttons, so the filename was unreadable/overlapped. The rows now render
as a stacked card below xl — name on its own full-width line, a folded
perms·size·modified line and the actions beneath — and only switch to the
table grid at xl (tightened columns). Mobile tidied up to match.
- Restore the pointer cursor: Tailwind v4's preflight makes buttons use the
default cursor, so clickable controls (folder names, every button) didn't show
a hand. Added a base rule giving enabled button/[role=button]/summary/label
the pointer cursor.
Verified the row at desktop / tablet / mobile widths (name readable at every
breakpoint, table only when wide). 374 tests pass (the Livewire test renders the
blade), Tailwind build clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Opening a binary / non-UTF-8 file in the file manager threw "undefined is not
valid JSON". The editor bound the raw file bytes to its public $content
property; Livewire JSON-encodes the component snapshot, and invalid UTF-8 makes
PHP's json_encode return false, so the client received an empty response and
JSON.parse("undefined") failed (the trace in mergeNewSnapshot/deepClone).
Fixed at both layers: FleetService::readFile blanks the content when it detects
binary/non-UTF-8 (returns the binary flag instead), and FileEditor::load only
binds content for non-binary, non-oversize files. Binary/oversize files show
their existing notice; the snapshot is always valid UTF-8.
Tests: load blanks binary content (keeps the snapshot valid) and keeps valid
text content. 374 pass, Pint clean.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Lists rendered loop rows without a wire:key. On re-render Livewire's morph
matched rows by position and cloned them, dropping the inline Alpine x-data
(modalTrigger) scope on the buttons — the console threw "Alpine Expression
Error: pending is not defined" (and a follow-on "undefined is not valid JSON"
as the snapshot merge broke). Reported in the file manager; the same pattern
existed across the app.
Added a stable wire:key to every loop whose rows carry inline Alpine / x-modal-
trigger state: files (entries + breadcrumbs), services, the release-channel
selector, settings (users, webauthn keys, login-protection bans) and the server
detail page (hardening, firewall rules, SSH keys, fail2ban exceptions). Keys use
a stable identifier (id / fingerprint / md5 of the natural key), not the loop
index.
372 tests pass (the Livewire tests render these blades, so a broken key would
fail them); /system, /settings, /files load 200 with no console errors.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The /audit page already rendered human-readable action labels (v0.9.48), but the
Dashboard's "recent events" panel still showed the raw codes (wg.set-endpoint,
deploy.update_request). It now uses the same AuditEvent::action_label + is_error
styling, so failures show red with an alert icon — consistent with the audit page.
Test: dashboard recent events render the readable label, not the raw code. 372
pass, Pint clean, dashboard loads 200 with no console errors and no raw codes.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two fixes the operator asked for:
- The "what's new" preview was empty. availableChangelog fetched CHANGELOG.md at
ref="0.9.50", but release tags are "v0.9.50" — the raw fetch 404'd and the
panel silently stayed empty. Use the v-prefixed tag as the ref. The existing
test masked it with a wildcard fake; tightened with Http::assertSent.
- The sidebar now shows a "1" badge on the Version item when an update is
available, so an update is visible on every page, not only the Versions page.
Driven by a new ReleaseChecker service: updateAvailable() is a pure cache read
(no network in the sidebar); a scheduled clusev:check-update (every 30 min,
anonymous/read-only) keeps the cache warm so the badge is accurate even before
the operator opens the Versions page.
Refactor: the remote tag lookup (fetch + newest-version) moved out of the
Versions component into ReleaseChecker; the component delegates. nav-item gains
an optional badge prop.
Tests: ReleaseChecker (cache-read update-available, refresh caches, command warms
cache, sidebar badge renders only when available) + the v-prefixed-ref assertion.
371 pass, Pint clean, /versions loads 200 with no console errors; badge + the
"What's new in v0.9.50" panel verified in the browser. Lang parity kept.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The audit log loaded the latest 50 entries and filtered them in memory, so it
couldn't grow and search only spanned those 50. Now it is paginated (25/page)
with the page deep-linked in the URL via Livewire WithPagination (?page=), and
the search runs in SQL across the whole history — matching actor / action code /
target / server name AND the readable labels (a term is translated to the action
codes whose localized label contains it, so "Endpoint geändert" still finds
wg.set-endpoint). Pagination control mirrors the changelog's windowed pager.
Tests: 25/page with page 2 overflow, search resets to page 1, search filters in
SQL across all pages (a match on page 2 surfaces when filtered). 365 pass, Pint
clean, /audit loads 200 with no console errors, audit lang parity 62/62.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Versions page only rendered the INSTALLED CHANGELOG.md, so the operator
couldn't see what an available update contained until after applying it. Now,
when behind a published release, a "What's new in vX.Y.Z" panel shows the
changelog of the available version(s) — fetched from the remote CHANGELOG.md at
the latest tag (Gitea raw API, anonymous/read-only, briefly cached), parsed with
the shared changelog parser and filtered to versions newer than installed.
Degrades gracefully: a failed fetch yields an empty preview and never blocks the
update button. Refactored releases() to a reusable parseChangelog().
Tests: preview lists only newer versions + renders their entries; no preview
when current. 362 pass, Pint clean, /versions loads 200 with no console errors,
versions lang parity 51/51.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The audit log showed raw machine codes ("Administrator · wg.set-endpoint").
Now each entry renders a localized human-readable label ("WireGuard endpoint
changed"), via an AuditEvent::action_label accessor backed by an audit.actions
lang map (DE/EN); unmapped/dynamic codes (e.g. harden.*.on|off) fall back to a
tidied form, never a bare code. Search also matches the readable label.
Failures are now visible: AuditEvent::is_error flags failed/security events
(failed sign-in, IP ban, failed 2FA, wg.action-failed) which render in red with
an alert icon. And failed WireGuard dashboard actions are now written to the
audit log with the host error message (not just a transient toast), so the
operator can read later what went wrong.
Tests: label mapping + fallback, is_error, page renders label not code, search
by label, WG failure auditing. 360 pass, Pint clean, /audit loads 200 with no
console errors, audit lang parity 59/59.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The server config showed a "Port" and an "Endpoint" that repeated the same
:51820, so it looked like the port had to be entered twice. It never did (since
0.9.43 a bare host gets the listen port appended) — but the UI didn't say so.
Now the field is labelled "Public endpoint (host)", the placeholder shows only
the host (port stripped via Str::before), and the hint explains the port is
taken from the listen port automatically; a different port is only needed for
port-forwarding (host:port). Display/copy only — no behaviour change.
Pint clean, /wireguard server tab loads 200 with no console errors, lang
parity 89/89, 354 tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- The Traffic panel header ("Empfangen/Gesendet") drew from the sampled
throughput, which is 0 until the minutely sampler accrues deltas — so a peer
with live traffic (e.g. 244 B) showed "0 B" in the header. It now sums the
live per-peer rx/tx counters, so the header always matches the peer rows. The
chart below stays windowed throughput (fills from the sampler).
- import_hint reworded to state plainly that the WireGuard phone app ALWAYS
prompts for a tunnel name on a QR scan (app behaviour, not changeable); the
.conf download is the path to an automatic name (filename = tunnel name).
Tests: header sums live peer counters. 354 pass, Pint clean, /wireguard 200 with
no console errors, lang parity 89/89.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three things the operator asked for on the WireGuard page:
- DNS is no longer hardcoded to 1.1.1.1. New host action set-dns (_set_dns +
cmd_set_dns + write-bridge branch + WgBridge validation, IPv4 list only),
stored as WG_DNS in wg.env (appended for pre-existing tunnels), surfaced via
the collector + WgStatus, baked into new peer configs (DNS = ${WG_DNS:-1.1.1.1}).
Editable in the Server tab; e.g. point clients at your own gateway.
- The page is split into two independent tabs: "Peers" (list / add / remove /
traffic) and "Server configuration" (endpoint / DNS / port / subnet / gate /
SSH lock + server identity). #[Url] $tab makes it deep-linkable (?tab=server).
- Offline detection: ONLINE_WITHIN 180s -> 150s (PersistentKeepalive=25 keeps
active peers re-handshaking well within it, so no flapping; a disconnect now
shows offline ~2.5 min sooner). Endpoint hint clarified: the port is optional
(auto-appended), no need to repeat the listen port.
Tests: set-dns (write+audit, reject), tab switch/clamp, dns in status; the two
configured-render tests now switch to the server tab for server content. 353
pass, shellcheck clean, Pint clean, both tabs load 200 with no console errors,
lang parity 89/89.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- QR: 0.9.42 over-enlarged it; bring the show-once peer QR back to a balanced
~240px (still crispEdges on a white quiet-zone frame) so it scans on a phone
without dominating the modal.
- Download filename now becomes a useful tunnel name on import: build it from
the endpoint host + peer name (e.g. "10.10.90.165-laptop.conf") instead of the
generic "clusev-wireguard.conf" — WireGuard apps name a tunnel after the file.
A QR scan can't carry a name (the app prompts for one); the import hint now
explains both paths.
Tests: download-filename cases (host+peer, fallback); 349 pass, Pint clean,
/wireguard loads 200, lang parity 83/83.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
If the operator entered an endpoint without a port (e.g. "10.10.90.165"
instead of "10.10.90.165:51820"), that value was written verbatim into every
peer config. WireGuard requires the endpoint as host:port, so the WireGuard app
rejected the QR/file import as "keine gültige WireGuard-Konfiguration" — the
real cause of the invalid-config errors (the QR-size fix in 0.9.42 was secondary).
Normalise host-side: append the listen port when the endpoint has no colon, in
both _write_server_conf (setup — covers the dashboard and interactive paths) and
_set_endpoint (later changes). Verified: bare host -> host:port, host:port left
as-is, DNS host -> host:port; write-bridge smoke test still passes; shellcheck
clean. setup_endpoint_hint (de/en) now documents the host:port format.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The show-once peer config QR rendered at 176px (~2.7px per module) with
anti-aliasing on. A WireGuard config QR is dense (~57 modules), so a phone
camera misread it and the WireGuard app rejected the result as "keine gültige
WireGuard-Konfiguration". Render it large (up to ~300px) on a white framed
quiet zone with shape-rendering:crispEdges, so modules stay sharp and ~4.6px
each. The Download button (.conf import on a PC) remains as the alternative.
Verified: old-vs-new render comparison (2.7 → 4.6 px/module, crisp modules);
Tailwind compiles the arbitrary shape-rendering property; /wireguard loads 200
with no console errors.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The host handler `clusev-wg.sh serve-request` aborted under `set -euo pipefail`
BEFORE writing run/wg-result-<id>.json, so the dashboard waited ~30s and showed
"Keine Antwort vom Host" even though the systemd watcher was running correctly.
The write-bridge had therefore never actually worked on a real deployment.
Two root causes, both fixed:
1. Field extraction: each `id/action/name/endpoint/port/subnet` value is pulled
with `grep -oE | head | sed`. A field that is empty or absent (an "auto"
endpoint at setup; gate/add-peer/remove-peer payloads that carry no
endpoint/port/subnet) makes grep fail → with pipefail the whole pipeline
fails → `set -e` aborts the handler before _write_result. Appended `|| true`
to every extraction so a non-match yields "" instead of killing the handler.
2. Action dispatch: gate-up/gate-down/gate-ssh-on/off and set-endpoint/port/
subnet (and remove-peer) called helpers that run require_setup, which `die`s
(exit) when the tunnel isn't configured yet — aborting serve-request before
the reply. Each handler now runs in a subshell `( ... )` so an internal exit
becomes a caught non-zero and still yields a clean failure result.
(add-peer/setup were already isolated via their $(...) command substitution.)
Verified end-to-end: all ten actions now write a result for minimal/empty-field
payloads instead of timing out. New smoke test docker/wg/serve-request.test.sh
(root-bypassed, no WireGuard needed) guards both regressions. shellcheck clean,
348 PHP tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two dashboard additions to the WireGuard page:
- Peer config download: the show-once new-client view gets a "Download"
button next to the QR code (streams clusev-wireguard.conf) plus an
inline hint explaining QR-on-phone vs download-on-PC import.
- SSH lock (port 22): an optional toggle in WireGuard settings that walls
off host SSH to the tunnel via a dedicated CLUSEV-WG-SSH chain on the
host INPUT chain. Fail-open by construction: ESTABLISHED,RELATED + lo +
wg0 + WG-subnet RETURN before the DROP (live sessions survive, SSH over
the tunnel stays open); _ssh_gate_on refuses while wg0 is down; the boot
unit's ConditionPathExists=wg0 and an in-function self-guard keep a
broken tunnel from ever applying the DROP; ssh_gate_apply re-validates
the subnet shape and fails open on a corrupt wg.env. Strong lock-out
warning shown inline AND in the confirm modal (recommend a backup peer).
New CLI escapes: clusev wg ssh-lock / ssh-unlock; clusev wg down clears
both gates. Panel gate and SSH gate are independent toggles.
Write-bridge: new gate-ssh-on/gate-ssh-off actions (no args, host
whitelist + ConfirmToken wgSshGate, single-use uid-bound). Status collector
now reports gate.ssh. Adversarial lock-out review: all 8 failure modes
refuted. 348 tests pass, shellcheck clean, Pint clean, R12 verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Update-progress phases were a pure time guess, so a fast update sat on "fetch"
then snapped all four green at once. Now the host updater publishes its real
macro-stage and the page tracks it:
- update.sh / install.sh write the current stage (fetch|build|restart|migrate|
done) to run/update-phase.json — best-effort (|| true, never aborts an update).
- new public GET /update-status.json serves that stage (whitelisted) to the page.
- update-progress.blade.php drives the checklist from the feed in REAL order
(fetch → build → restart → migrate), falling back to the time heuristic when no
feed is present, and completes on the feed's 'done' (or the version flip, with a
25s grace fail-safe). Like the 502 fix, the live experience lands one update
after this ships (the page shown DURING an update is the old version's).
Also: Versions changelog series + page are now #[Url]-synced (?series=&page=),
so a series/page is shareable and survives reload / back-button.
Tests: /update-status.json (null / whitelisted / rejected stage), the page polls
the feed, and the changelog deep-link reads ?series=&page=.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the flat 48-item changelog list with a series browser: releases are
grouped by major.minor (e.g. "0.9"), a rail (vertical from xl, horizontal pills
below) selects the series, and the active series is paginated (8/page) with the
newest release open by default. The installed series is marked; each row shows
its change categories as toned glance-dots.
Also fixes, surfaced by an adversarial review of the change:
- icon: add the missing 'chevron-right' Lucide path — the accordion disclosure
caret and the pagination "Next" button were rendering an empty <svg>.
- blade: wire:ignore.self on each <details> so a user's open/closed toggle is not
reset by an unrelated re-render (autoCheck / check-updates / in-update poll); a
series/page change still re-defaults to first-open via a fresh wire:key.
- blade: 44px touch targets (series pills + pagination) below lg (R7).
- i18n: localised 'Other' series label; pluralised series_count (no "1 Releases").
- Index: render() is the single clamp authority for changelogPage.
Index.php: groupBySeries() + pageWindow() + selectSeries/gotoChangelogPage; render
builds the series list, resolves the active series, paginates. New DE+EN keys.
VersionsChangelogTest covers grouping order, default series, paging, clamp, the
installed-series cue, and the chevron-right icon regression.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The update-progress page declared completion on two consecutive 200s from
the /up health route. But the OLD container keeps answering /up 200
throughout the minutes-long rebuild, so the page redirected prematurely
back into the teardown → 502 / white screen.
Now the page polls a lightweight public /version.json probe and finishes
only when the running version has actually moved past the pre-update one
(passed as ?from=), or after an observed down→up cycle for a same-version
redeploy. The 10-minute timeout + manual-reload fallback are unchanged.
- routes/web.php: add public GET /version.json; sanitise+pass ?from= to the view
- Versions/Index.php: include the installed version as ?from= in the redirect
- update-progress.blade.php: version-gated completion (fromVersion/sawDown)
- UpdateProgressTest: probe endpoint, embedded baseline, from-sanitisation, no /up poll
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
With one CSS + one JS entry the <link rel=preload> sits next to the matching
stylesheet/script and adds no value, but it triggers Chrome's 'preloaded but
not used' console warning (amplified by DevTools 'Disable cache', which
double-fetches the CSS). Disable preload tag generation; stylesheet and script
still load normally.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
boban