Three things the operator asked for on the WireGuard page:
- DNS is no longer hardcoded to 1.1.1.1. New host action set-dns (_set_dns +
cmd_set_dns + write-bridge branch + WgBridge validation, IPv4 list only),
stored as WG_DNS in wg.env (appended for pre-existing tunnels), surfaced via
the collector + WgStatus, baked into new peer configs (DNS = ${WG_DNS:-1.1.1.1}).
Editable in the Server tab; e.g. point clients at your own gateway.
- The page is split into two independent tabs: "Peers" (list / add / remove /
traffic) and "Server configuration" (endpoint / DNS / port / subnet / gate /
SSH lock + server identity). #[Url] $tab makes it deep-linkable (?tab=server).
- Offline detection: ONLINE_WITHIN 180s -> 150s (PersistentKeepalive=25 keeps
active peers re-handshaking well within it, so no flapping; a disconnect now
shows offline ~2.5 min sooner). Endpoint hint clarified: the port is optional
(auto-appended), no need to repeat the listen port.
Tests: set-dns (write+audit, reject), tab switch/clamp, dns in status; the two
configured-render tests now switch to the server tab for server content. 353
pass, shellcheck clean, Pint clean, both tabs load 200 with no console errors,
lang parity 89/89.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- QR: 0.9.42 over-enlarged it; bring the show-once peer QR back to a balanced
~240px (still crispEdges on a white quiet-zone frame) so it scans on a phone
without dominating the modal.
- Download filename now becomes a useful tunnel name on import: build it from
the endpoint host + peer name (e.g. "10.10.90.165-laptop.conf") instead of the
generic "clusev-wireguard.conf" — WireGuard apps name a tunnel after the file.
A QR scan can't carry a name (the app prompts for one); the import hint now
explains both paths.
Tests: download-filename cases (host+peer, fallback); 349 pass, Pint clean,
/wireguard loads 200, lang parity 83/83.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
If the operator entered an endpoint without a port (e.g. "10.10.90.165"
instead of "10.10.90.165:51820"), that value was written verbatim into every
peer config. WireGuard requires the endpoint as host:port, so the WireGuard app
rejected the QR/file import as "keine gültige WireGuard-Konfiguration" — the
real cause of the invalid-config errors (the QR-size fix in 0.9.42 was secondary).
Normalise host-side: append the listen port when the endpoint has no colon, in
both _write_server_conf (setup — covers the dashboard and interactive paths) and
_set_endpoint (later changes). Verified: bare host -> host:port, host:port left
as-is, DNS host -> host:port; write-bridge smoke test still passes; shellcheck
clean. setup_endpoint_hint (de/en) now documents the host:port format.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The show-once peer config QR rendered at 176px (~2.7px per module) with
anti-aliasing on. A WireGuard config QR is dense (~57 modules), so a phone
camera misread it and the WireGuard app rejected the result as "keine gültige
WireGuard-Konfiguration". Render it large (up to ~300px) on a white framed
quiet zone with shape-rendering:crispEdges, so modules stay sharp and ~4.6px
each. The Download button (.conf import on a PC) remains as the alternative.
Verified: old-vs-new render comparison (2.7 → 4.6 px/module, crisp modules);
Tailwind compiles the arbitrary shape-rendering property; /wireguard loads 200
with no console errors.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The host handler `clusev-wg.sh serve-request` aborted under `set -euo pipefail`
BEFORE writing run/wg-result-<id>.json, so the dashboard waited ~30s and showed
"Keine Antwort vom Host" even though the systemd watcher was running correctly.
The write-bridge had therefore never actually worked on a real deployment.
Two root causes, both fixed:
1. Field extraction: each `id/action/name/endpoint/port/subnet` value is pulled
with `grep -oE | head | sed`. A field that is empty or absent (an "auto"
endpoint at setup; gate/add-peer/remove-peer payloads that carry no
endpoint/port/subnet) makes grep fail → with pipefail the whole pipeline
fails → `set -e` aborts the handler before _write_result. Appended `|| true`
to every extraction so a non-match yields "" instead of killing the handler.
2. Action dispatch: gate-up/gate-down/gate-ssh-on/off and set-endpoint/port/
subnet (and remove-peer) called helpers that run require_setup, which `die`s
(exit) when the tunnel isn't configured yet — aborting serve-request before
the reply. Each handler now runs in a subshell `( ... )` so an internal exit
becomes a caught non-zero and still yields a clean failure result.
(add-peer/setup were already isolated via their $(...) command substitution.)
Verified end-to-end: all ten actions now write a result for minimal/empty-field
payloads instead of timing out. New smoke test docker/wg/serve-request.test.sh
(root-bypassed, no WireGuard needed) guards both regressions. shellcheck clean,
348 PHP tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rebuild the README around the product's "Tactical Terminal" design system
(dark graphite, signal-orange, cyan, mono type) so it reads as a professional,
self-hosted enterprise product instead of a plain text file:
- docs/assets/clusev-banner.svg — hero banner with the Clusev wordmark, tagline,
brand chips, and a live "fleet" node-graph (control-plane hub → server cards
with the online/warning/offline status triad + CPU bars and animated data
pulses). Self-contained: the real product fonts (Chakra Petch + JetBrains Mono)
are embedded base64 so Gitea's <img>-rendered SVG shows pixel-correct type.
- docs/assets/clusev-architecture.svg — Operator → Control plane → Fleet diagram
(HTTPS/WS · Reverb in, SSH+SFTP · phpseclib out), same brand language.
- README.md — centered hero, brand-matched shields badges, anchor nav, a
"why" three-up, a Features table, the architecture diagram + a tech-stack
table, and the existing install / domain-TLS / updating / security-recovery
content kept verbatim (now with a WireGuard feature row). All graphics are
external SVG files (Gitea strips inline <svg>); relative paths resolve on the
default branch.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Verified dead-code + duplication cleanup over the WireGuard feature surface
(found via an audit workflow, every item adversarially re-verified by grep):
Dead code removed:
- lang keys not_configured_title / not_configured_body (both locales) — orphaned
when the unconfigured empty state became the in-page setup form (setup_title /
setup_intro). 0 references anywhere. de/en parity kept (83/83).
- WgTraffic::series() 'buckets' return key — written, never read by blade/route/test.
- blade $fmtB byte-formatter — byte-identical duplicate of the top-level $fmtBytes
already in scope; collapsed onto $fmtBytes.
DRY / readability (behavior-preserving):
- Index: PEER_NAME_RE constant (was the same regex literal at 5 sites), portInRange()
+ clampWindow() helpers (window default now self::WINDOWS[0]), openConfirm() helper
(5 confirm-modal openers shared one dispatch), onFlag() helper (2 apply handlers).
- WgBridge: validPort() helper (port check was duplicated verbatim).
- clusev-wg.sh: _write_server_conf() shared by both setup paths (the byte-identical
server bring-up was copy-pasted); single CIDR_RE constant for the 3 subnet checks;
fixed a stale header comment that still claimed SSH is "NEVER matched" (the v0.9.40
ssh-lock can match 22); documented the defence-in-depth re-validation in _set_*.
- WgStatus: documented server.pubkey is part of the /wg-status.json contract (kept).
No DB/migration changes (peer_name write-only column left intact — needs a
coordinated migration). 348 tests pass, shellcheck clean, Pint clean, R12 verified
in both the configured + unconfigured states (200, no console errors, no leaked
keys, traffic formatter renders 1.5 MB / 200 KB correctly).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two dashboard additions to the WireGuard page:
- Peer config download: the show-once new-client view gets a "Download"
button next to the QR code (streams clusev-wireguard.conf) plus an
inline hint explaining QR-on-phone vs download-on-PC import.
- SSH lock (port 22): an optional toggle in WireGuard settings that walls
off host SSH to the tunnel via a dedicated CLUSEV-WG-SSH chain on the
host INPUT chain. Fail-open by construction: ESTABLISHED,RELATED + lo +
wg0 + WG-subnet RETURN before the DROP (live sessions survive, SSH over
the tunnel stays open); _ssh_gate_on refuses while wg0 is down; the boot
unit's ConditionPathExists=wg0 and an in-function self-guard keep a
broken tunnel from ever applying the DROP; ssh_gate_apply re-validates
the subnet shape and fails open on a corrupt wg.env. Strong lock-out
warning shown inline AND in the confirm modal (recommend a backup peer).
New CLI escapes: clusev wg ssh-lock / ssh-unlock; clusev wg down clears
both gates. Panel gate and SSH gate are independent toggles.
Write-bridge: new gate-ssh-on/gate-ssh-off actions (no args, host
whitelist + ConfirmToken wgSshGate, single-use uid-bound). Status collector
now reports gate.ssh. Adversarial lock-out review: all 8 failure modes
refuted. 348 tests pass, shellcheck clean, Pint clean, R12 verified.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
boban